This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
Updated version can be found here http://forum.xda-developers.com/showthread.php?t=538874
What precisely did you find not working in this WiFi Router?
Additional button - Row
Hi At0mAng
Personally, I use the Microsoft Direct Push button/row so wouldn't want to loose it to this. Is there any possibility of making a version that adds an additional button to the Comm Manager?
Cheers
andrew-in-woking
If I have uesed the ruter it is inposible to get conect to internet after.
In the begining I thourgh it was low 3g /hi but I found if I conect my tp2 as a modem or use the ruter again, it is no problem surfing whit the computer but still not whit the phone.
Any out there who has a solution or an idea?
ka
eac said:
What precisely did you find not working in this WiFi Router?
Click to expand...
Click to collapse
From what I recall on the Touch Pro it was easier to start the router and did not have to enable the settings to automatically use the settings when starting. Othe than that it has been working well for me.
Yes I can make a version where direct push is left alonr or you can install this and use advance config to place direct push back on comm manager.
What's different from THIS version? That version works just fine on my Vario V.
Don't have the CommManager link but it works just fine running it from the connections tab.
works nice!!!
thanks you very much i really
will use this!!
- Not found 3g connection. Only slow GSM.
- Delete Direct Push button, not adds an additional button to the Comm Manager
0n my tp the app dosent start from the com manager - i thought it didnt install until i found it in a new folder within the programs folder called network center...
so, when i start the app its interface is too tall for the tp - the checkbox is below/behind the software keyboard icon...
so,i dont knnow how to get it to work since what i see is so different from the instructions. can someone offer any guidance? seems t me that the wifi chip needs to be on but it keeps finding available networks and th wifi router doesnt seem to do anything.... yep, am having issues!
Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.
mccune said:
Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.
Click to expand...
Click to collapse
I am not sure what the difference is. I would guess it is no different since everyone is getting the package from the same place...
At0mAng said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
The following CAB will also place the WiFi Router on the Comm Manager, it will replace Microsoft Direct Push.
Please follow instructions for it to work properly:
Install At0mAng WiFi Router.cab
Restart your phone
Open Comm Manager
Tap where it reads Internet Sharing to bring up WiFi Internet Sharing, if you tap the On/Off button it will bring up the USB Internet Sharing
Set the Router name and password you would like.
Set the option to always use these settings without asking
Close WiFi Router
Go back to Comm Manager
Restart WiFi Router
You should be able to connect now.
Click to expand...
Click to collapse
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking
i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..
xdadJeroen said:
i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..
Click to expand...
Click to collapse
No, the phone has WiFi that should work fine with your home router. This program turns your phone into a WiFi router, so you can connect a laptop to your phone (by WiFi) and get internet access for the laptop when away from home.
Gordon
and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?
julienrl said:
and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?
Click to expand...
Click to collapse
this one is free thats why
redd214 said:
this one is free thats why
Click to expand...
Click to collapse
oh... i like that! lol
Does it provide the tethering charge workaround too? and does it have a crash cleanup? (TP2 is in the mail so I can't test )
When I change the settings, set always use and close, on returning the settings have gone back to default.
How do I change the settings permanently?
A new version is out in the Development and Hacking forum that resolves some issues of this one.
Look for a post by Noonski.
andrew-in-woking said:
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking
Click to expand...
Click to collapse
Here you go...
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:00000008
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="Bluetooth"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]
"Execute"="\\Windows\\repllog.exe"
@="AUTD"
"ExecuteCommand"="//remote"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\5]
"Execute"="\\Windows\\WiFiNetwork.exe"
@="WLAN"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\4]
"Execute"="\\Windows\\CMInternetSharing.exe"
"ExecuteCommand"="cplmain 50"
@="InternetSharing"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\3]
"Execute"="\\Windows\\ConnectionSetup.exe"
@="DataDisconnection"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\2]
@="3G"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\1]
"Execute"="\\Windows\\CMPhone.exe"
@="Phone"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\0]
@="FlightMode"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\BCMSDDHD1"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\DataDisconnection]
@="DataDisconnect.exe"
Related
I've decided that the original order of the Comm Manager is not quite good so i edited it a bit:
This is how it looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More Info:
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
3G:
On = 3G Mode.
Off = GSM Mode.
Download from here:
http://rapidshare.com/files/124019477/Nadavi_HTC_Diamond_-_NEW_CommManager.cab
Enjoy,
Nadavi
Well done! one less think for me to complain about lol
Whats the fastest way to get to com manager btw? Am i missing something but i have to click the top bar, then an icon, then com manager in the little notification?
ps. any change you could attach it here, i have 97 minutes before i can download from RS again
someone1234 said:
Whats the fastest way to get to com manager btw? Am i missing something but i have to click the top bar, then an icon, then com manager in the little notification?
Click to expand...
Click to collapse
Use your finger to scroll through the Settings tab (between weather and programs), then you can click on the Communication Manager. It's one step less than your method.
The new Manager looks nice, but what is there to 'beam'?
The only one I miss on the panel originally inside the oficial roms, is the possibility to cgange between 3G to GSM.
98% of the time, I only use GSM. Only when I need to navigate or make a video call, then I use 3G....otherwise it's useless, and battery consuming...
HastaSSSS
205_lacoste said:
The new Manager looks nice, but what is there to 'beam'?
Click to expand...
Click to collapse
I was about to ask the same thing...as far as i can see in the settings...theres the option to accept beams but you cant beam anything??. Does the Diamond come with an infra red sensor?? because i cant see any sensor on the side of the phone??
Otherwise that comm mananger looks really nice...ill be downloading it later and applying it to my Diamond
Oh you star! Well done, this is perfect for me as I have 3G in the park outside but not in the house so while it's always searching for 3G my GSM signal suffers.
Top marks to you.
205_lacoste said:
Use your finger to scroll through the Settings tab (between weather and programs), then you can click on the Communication Manager. It's one step less than your method.
The new Manager looks nice, but what is there to 'beam'?
Click to expand...
Click to collapse
Simply set the COMM Manager as one of your start menu items.
Then it's only Start Menu-> Comm Manager.
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
Nadavi
Nadavi said:
Simply set the COMM Manager as one of your start menu items.
Then it's only Start Menu-> Comm Manager.
Click to expand...
Click to collapse
Also two steps, just as mine, but even quicker. Visual "Disadvantage" is that you will go out of the TFL3D surrounding using the start menu
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
Click to expand...
Click to collapse
What is the added value over the Bluetooth ON/OFF setting? In other words, what can I do with bluetooth ON if i can't have data traffic.
cool thats what i'll do!
Still waiting for rapidshare to let me download :'(
Nadavi said:
I've decided that the original order of the Comm Manager is not quite good so i edited it a bit:
This is how it looks:
More Info:
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
3G:
On = 3G Mode.
Off = GSM Mode.
Download from here:
http://rapidshare.com/files/124019477/Nadavi_HTC_Diamond_-_NEW_CommManager.cab
Enjoy,
Nadavi
Click to expand...
Click to collapse
is there any other way to download the file??
alway cannot get it download
Finally got it
Bluetooth means turn bluetooth on, so if you have a headset for example that's already been paired it'll work.
Turning beam on means your device is discoverable, so something which hasnt already paired can see it. I guess its usefull to quickly turn on beam to grab something from a friend, then turn it back off again.
What software can they use to make this type of modifications
Ok, everything's clear now I've installed the app too as it looks like there are only benefits. It would be better if the flight mode would be available too. Now I turn flight modus on by holding the hang-up button.
Thanks for the little app!
Beautiful work. Thanks Navadi.
Thanks Nadavi for the efforts.....
And we can use advance config to arrange our own desired tab...
This all can also be done through Schaps. Advanced Config ...
aragornol said:
This all can also be done through Schaps. Advanced Config ...
Click to expand...
Click to collapse
10 cent's to you
You Welcome,
Nadavi.
thx a lot m8!
very nice mod
thx again!!!
aragornol said:
This all can also be done through Schaps. Advanced Config ...
Click to expand...
Click to collapse
...but without icons.
panosha said:
...but without icons.
Click to expand...
Click to collapse
You got it
Nadavi
Since I mostly use the spb shell-panel I started to get very bothered with the amount of clicks needed to enable or disable bluetooth (in some SE panels this is available with a click on an icon and then an OK but not in spb shell).
Since I am used to develop applications in Visual Studio I got around to learn how to develop for the windows mobile platform and threw together a little application to do what I wanted.
This little application simply enables or disables bluetooth without any fuss or questions and then terminates itself. The first time the application is started you will be asked whether you want your cellphone to be visible to other devices when bluetooth is enabled. I have this app in my startmenu so it is always available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To install, download the CAB-file, transfer it to your phone, and install by opening the CAB-file from the phones filebrowser.
thats handy
many2 thanks
Oh, thank you! I still don't have an xperia, but for sure when I'll have it, i'll install this cab^^ but could you do it also as a "panel"? This would be awesome, I think.. Because I really like the design, its very beautiful and as a panel it could be really useful^^ anyway, thanks a lot!!! Greez, cad
cadenza said:
Oh, thank you! I still don't have an xperia, but for sure when I'll have it, i'll install this cab^^ but could you do it also as a "panel"? This would be awesome, I think.. Because I really like the design, its very beautiful and as a panel it could be really useful^^ anyway, thanks a lot!!! Greez, cad
Click to expand...
Click to collapse
Thanks
Unfortionately I have no idea how to code panels at the moment. I downloaded SonyEricssons developer kit for panels but it was only for C++ and my coding language of choice is C#. But maybe I can find something here in the forums.
Personally I would say I prefer not having this app as a panel since I want it available all the time (It's in my start menu).
Ah, that makes sense. It would have been just a goody to play with, I would have really liked such a panel, but you're right, this is much more effective. Hehe, and you would've been the first one programing such a panel, isn't that exciting? anyway, don't hear me, I know really nothing about programing, so don't care what I say just thank you for this really helpful app!!! Greez, cad^^
Thanks alot! I really wanted to use the spb panel but it didnt have the enable/disable connectivity buttons so I had to stick with the sony ericsson one which is painfully slow!
Is it possible that you could make something similar, but for enable/disabeling wifi, please?
cheers mate
Agaas said:
Thanks alot! I really wanted to use the spb panel but it didnt have the enable/disable connectivity buttons so I had to stick with the sony ericsson one which is painfully slow!
Is it possible that you could make something similar, but for enable/disabeling wifi, please?
cheers mate
Click to expand...
Click to collapse
Hi!
I am actually thinking about creating such a program. What would be the prefered way to do it you think? To get a question when the application is started whether you want to work with wifi or bluetooth, or to have two separate applications, one for wifi and another for bluetooth?
I am leaning towards alternative number two, I like just having to click the application once and that's it.
khaan said:
I am leaning towards alternative number two, I like just having to click the application once and that's it.
Click to expand...
Click to collapse
Yes, thats what I would prefer. Keep it simple.
why not install SPB Phonesuite - then you have a plugin on the today screen with one large nice button to quickly turn wifi and bluetooth on and off
azeman said:
Yes, thats what I would prefer. Keep it simple.
Click to expand...
Click to collapse
Me too, as few clicks as possible please
Too bad spb didnt intergrate connectivity buttons in their panel...
I use aebplus.. amazing program.
linked the "OK" button to bring up the "action list" when double clicked, and then scroll down to toggle bluetooth on/off. super fast and reliable since it only uses hard keys.
read about my other shortcuts here:
http://forum.xda-developers.com/showthread.php?t=441191
Thank you!
from the spb-panel:
- click antenna
- click comm manager
- start bluetooth
and now:
- press start
- start bluetooth
is it really about 1 click ?
- QuadWord
Does anyone know if mikelspikel's Wirelesspower originally developed for the Dell Axim will work on the SE X1. I'm about to retire my X51v in favour of an X1 and use it all the time. Its a pill-crusher.
Here's the link: http://www.mobilitysite.com/boards/...t-switch-utility.html?highlight=wirelesspower
Hi I installed the cab but got a error message ...
Do you know why ???
it wont work for me either when I open it I get told I have to install a newer version of .net compact from microsoft. Anyone got the cab file for the .net compact
madzo2008 said:
it wont work for me either when I open it I get told I have to install a newer version of .net compact from microsoft. Anyone got the cab file for the .net compact
Click to expand...
Click to collapse
There you go: http://www.microsoft.com/downloads/...FD-AE52-4E35-B531-508D977D32A6&displaylang=en
and http://www.microsoft.com/downloads/...2F-5D1A-413D-8319-81DA479AB0D7&displaylang=en
khaan said:
Hi!
I am actually thinking about creating such a program. What would be the prefered way to do it you think? To get a question when the application is started whether you want to work with wifi or bluetooth, or to have two separate applications, one for wifi and another for bluetooth?
I am leaning towards alternative number two, I like just having to click the application once and that's it.
Click to expand...
Click to collapse
So was a wifi switcher created?
First nice work khaan!
I use PhoneWeaver, its really a profile tool. Where you can customize alot, sounds, connections and so on... manual or autoswitching profiles. But about the Bluetooth thing, you can add PW to you todayscreen, and there you see your bt-connection, press it to acitvate or disable it.
I found these whilst browsing the forum yesterday, seem to work well.
Main Post:
http://forum.xda-developers.com/showthread.php?t=398050&highlight=Raiisak
Wifi Toggle:
http://forum.xda-developers.com/showpost.php?p=2307705&postcount=30
BT Toggle:
http://forum.xda-developers.com/showpost.php?p=2323317&postcount=64
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi there people.
I have a Tomtom ONE v2 device.
with my old phone, i would pay a yearly subscription to get the traffic updates. this would work by bluetooth pairing my tomtom with my phone (K800i). tomtom would then get my phone to GPRS data from TOMTOM about where all the traffic issues are..
But when i try to do it with the X1i, although it will see the phone, when i try to access the data and get an update of the traffic, it says: "X1i The required features could not be found for this phone"
.
Any help would be appreciated from you guys out there who may know how to sort this one out?
Traffic updates are important to me
Thanks in advance
Does anyone have any ideas?
surely a phone such as this should integrate with TomTom?
Hi,
I believe this is because Microsoft removed Bluetooth DUN (Dial up networking) from Windows Mobile 6 - This has been replaced with PAN / Internet Connection Sharing.
TomTom currently only support DUN and not PAN
Aparently DUN was removed and the operators were able to add it into their ROM if they wanted to, just not many carriers did..
I have not got the exact threads to hand as im at work and they are bookmarked on my home PC, but if you search this forum (or google) for "Bluetooth DUN WIndows Mobile 6" or "BT DUN Windows Mobile 6" there are some threads which detail some fixes - I think there may be an aditional CAB file and registry tweaks required to get it working...
If you cant find them ill post back on here toinight with the links I found..
Cheers,
Craig
Wow, thanks, I have found a few articles about installing a CAB file
WM6_BT_DUN.cab
Hopefully it is as simple as installing it..I will have to wait till i get home to try this...
You are a star for pointing me in the right direction. Pints are on me!!!
Not a problem
I have been looking at this over the past couple of days, would you mind letting me know how you get on with it and if it works?
Cheers,
Craig
big smiles around here...
it works..
top marks!
thanks
I installed this too just now, but DUN isn't listed in Bluetooth Supported Profiles
what tomtom do you have?
kuztardd said:
what tomtom do you have?
Click to expand...
Click to collapse
That's irrelevant. DUN should be listed in Windows Mobile before anything is connected.
easy tiger
For me, all i did was install the cab file as mentioned above onto my phone, soft reset, and then tried paring my tomtom to my x1 and it worked.
cab files is here:
http://forum.xda-developers.com/showpost.php?p=1351044&postcount=21
(for pairing the phone has to have bluetooth on, and is visible to other devices)
comm manager: settings:bluetooth: mode:
The pairing was done from my Tomtom One V2, not from the phone. The phone just accepted the pairing.
On a tangent:
Remember though that using wifi at the same time as bluetooth turns bluetooth off..
but it can be fixed by reading this thread:
[FiX] Bluetooth turning off with MortScript - xda-developers
My X1 also does not show up a DUN profile
comm manager: settings:bluetoothrofiles
but heck, it still works!
Hi, I have followed the instructions and my tomtom go 700 now sees the X1 properly. However I have some questions:
To setup the data connection, what phone do you select in the list on the TomTom? Or what custom settings should we use to connect to the internet from the tomtom using the X1.
Thanks,
Stephane
any one here know how to stop Jade accidently connect to gprs/3g services....?
as normally i also accidently clicked on the youtube or the browser....
my last bill i'm been charge $42. for nothing....
used the NoData but didnt help......
i just need MMS not internet browsing.....
I am not sure how that happened but I presume you accidently tap "Lauch Browser" or "Youtube" in the Internet tab of TF2D. If that's the case, then you should disable the Internet tab (using M2DC). If you really need to use the browser or Youtube, then use the conventional way, i.e. Start Programs.
azahidi said:
I am not sure how that happened but I presume you accidently tap "Lauch Browser" or "Youtube" in the Internet tab of TF2D. If that's the case, then you should disable the Internet tab (using M2DC). If you really need to use the browser or Youtube, then use the conventional way, i.e. Start Programs.
Click to expand...
Click to collapse
Azahidi,
which one u recommend M2DC or Advanced_Configuration_Tool_v3.3 ???
is is will crash if i installed both??
foxx3001 said:
Azahidi,
which one u recommend M2DC or Advanced_Configuration_Tool_v3.3 ???
is is will crash if i installed both??
Click to expand...
Click to collapse
I've not tried the advanced one. But for me, the basic M2DC works fine for me all these while. It's not a good idea to have both.
foxx3001 said:
any one here know how to stop Jade accidently connect to gprs/3g services....?
as normally i also accidently clicked on the youtube or the browser....
my last bill i'm been charge $42. for nothing....
used the NoData but didnt help......
i just need MMS not internet browsing.....
Click to expand...
Click to collapse
Create a new data connection. I usually give it name "None". Set invalid settings, so your phone is unable to connect to GPRS with it. Set your data connection to this invalid profile . If you need more step-by-step instructions, let me know.
azahidi said:
I've not tried the advanced one. But for me, the basic M2DC works fine for me all these while. It's not a good idea to have both.
Click to expand...
Click to collapse
after installed the M2DC i tried to apply the new Theme and i felt that the response abit sluggish ....
it's it due to im installed on the external memory ???
fenikso said:
Create a new data connection. I usually give it name "None". Set invalid settings, so your phone is unable to connect to GPRS with it. Set your data connection to this invalid profile . If you need more step-by-step instructions, let me know.
Click to expand...
Click to collapse
care to guide me????
foxx3001 said:
after installed the M2DC i tried to apply the new Theme and i felt that the response abit sluggish .... it's it due to im installed on the external memory ???
Click to expand...
Click to collapse
What is sluggish? The M2DC or the new Manilla theme? I've got no problem. M2DC completes in <10 secs after apply. I installed M2DC on my SD card too. See this lead http://forum.xda-developers.com/showpost.php?p=3307819&postcount=15
azahidi said:
What is sluggish? The M2DC or the new Manilla theme? I've got no problem. M2DC completes in <10 secs after apply. I installed M2DC on my SD card too. See this lead http://forum.xda-developers.com/showpost.php?p=3307819&postcount=15
Click to expand...
Click to collapse
the response when u slide ur finger from home to program..... but now a bit ok after changed to less complicated theme
applied no problem....
foxx3001 said:
care to guide me????
Click to expand...
Click to collapse
No problem at all.
1) Go to settings / connections, select connections.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) In "My ISP", select "Add a new..."
3) Select "Cellular line" and name "None" (or whatever you like).
4) Set invalid name of access point (or leave blank)
5) Do not fill anything else, click finish
6) Go back to settings and click "Manage existing..."
7) Select "None" if you would like to disable your data connection (or select your previous connection if you would like to use it, in my case named "Vodafone")
8) When "None" data connection is active and some app is trying to get data connection, you will get this error. The data connection will not work, so it will not cost you anything .
Questions?
fenikso said:
No problem at all.
1) Go to settings / connections, select connections.
2) In "My ISP", select "Add a new..."
3) Select "Cellular line" and name "None" (or whatever you like).
4) Set invalid name of access point (or leave blank)
5) Do not fill anything else, click finish
6) Go back to settings and click "Manage existing..."
7) Select "None" if you would like to disable your data connection (or select your previous connection if you would like to use it, in my case named "Vodafone")
8) When "None" data connection is active and some app is trying to get data connection, you will get this error. The data connection will not work, so it will not cost you anything .
Questions?
Click to expand...
Click to collapse
Yes, Questions!
I'm not really waiting for a data-connection bill, So I'd like to know something: Does this Completely the 3G/GPRS connection untill you switch to another setting again? And can I use Wi-Fi without touching this 'Blockade'? Since my parents pay my monthly fee, I'm not really looking forward to accidently getting a data-connection bill, so I'd like to have some verification
cPT.cAPSLOCK said:
Does this Completely the 3G/GPRS connection untill you switch to another setting again?
And can I use Wi-Fi without touching this 'Blockade'?
Click to expand...
Click to collapse
1) This should completely disable your data connection. I tested it on GPRS and it worked with my service provider. It basically prevents you to reach GPRS access point. You can download SPB Wireless Monitor (evaluation 30 days) and try for yourself. But I know that PocketPCs sometime act in a very strange way, so even when I am 99% sure, no guaranties from me, sorry .
2) Sure, you can. That is exactly how I used it.
Thanxs Fenikso for the info and guide.....
at last i solve my initial problem......
- Applied "Any Button Wake-Up "
- Then my "Accidently" problem appears....
- Applied the Fenikso step guide.- Solve the problem...
- And another thing that i realize that i also "accidently" call someone from the contact.
- Found the Softkey Lock Phone - Solve all my problem.....
But still thinking is there Autolock function built-in , tried the Diamond step but no luck.....
Thanks Fenikso for the info and guideness.....
Is there a way to turn off 3g, if not using on the tilt 2? it's draining my battery. wktask failed on me, gave me errors and froze the phone. are there other similar apps like wktask?
Install the advanced configurator tool (search) and enable Band Selection in the phone settings.
Just go to the built in comm manager and switch it off....
well Im using NGGz 6.5 rom and the last option on the list is 3G, just tap the little on/off switch works great for me.
Although by the sounds of it maybe this option is not available on your rom?
not sure where the built in comm manager in...
i'm using the standard rom..i just got this phone a few days ago.l havent flashed it yet.
settings
if its anything like the stock TMOUS ROM slide over to the settings tab and look for communications tap that and down at the bottom it should be there.
so i'm noticing that my data connection always get turned on by itself. any i dea why? i set all my outlook exchange and email to manual sync...
if not, i did find this cab that can disable it..i'll give it a go and see if it will work
I think WMLongLife should do what you want. I haven't tried it, but there are reports of it working with various TP2s.
Hi folks
tech savvy and search friendly i may be BUT,,, i cant get the 3g to go off on a htc tilt 2.. ive tried about all and searched till i have no fingers ..i cant get the communications manager to stop to imout a new one .. nothing.. anyone PLEASE help.. i got this phone free new for a fuze and im really happy EXEPT at&t or whomevers right that revoved the ability to switch bands ..i hate to be flamed,, but if thatas the way you guys want to be u r loss.... i have searched.. even with windows longlife it reverts to 3g...i loved the fuze,, and thanks to you guys here ,, you made it very nice.. i put a new manager and snaps in the other and it worked .. my two new ones no luck..anyway i have a tilt 2.. st7377.. anyones help is appreciated as i like the phone.. just no d pad..
On my European TP2 with stock ROM I do this to switch off 3G:
Settings tab > Communication > Telephone (not the on/off switch!! Just tap the phone icon or title) > Band > GSM
and you are done. If it switches on 3G after that, it's bugged somehow.
hello
thanks for the input ,, any fix for the issue ? that is exactly what im seeing ,, it goes right back to 3g.. i have tried it all just about..cant get the communications manager to stop or id try duttys 10 button.. but it refuses to install..not really wanting to swap the rom ,,,YET.. just want 3g to go to h*ll. imput hill if you wanna.. but you know what i mean!!
Just got my Tilt 2. I couldn't believe there is no way to turn off 3G in the stock ROM settings as there was on my Treo 750. I looked into the Advanced Configuration Tool and the WMLongLife tool. They are both incredible but are overkill for me. I just want to be able to manually turn 3G off and on. I found something on Handango dot com that seems to work well. It is called Bandswitch and is made specifically for HTC windows phones. Only problem is its ridiculous price, $14. But it seems to keep 3G off until I enable it again. It also has some other features regarding wifi and bluetooth. It has a trial version so I hope some of you try it out and let me know your pros and cons. I am surprised by how little discussion there is on this subject.
install that cab from the previous post and soft reset your phone. it should work. if not, you will need to go to comm. manager and turn off 3g.
anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.
The Jack of Clubs said:
anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.
Click to expand...
Click to collapse
Hey man...I actually enabled that switch in comm manager with a setting that was buried in one of the regular config apps we use (total commander, HD tweak, Rhodium settings tool), I just can't remember which right now.
It put the switch you're talking about on the comm manager screen, right below the data connection spot. But...on my 6.1 ROM it doesn't have any effect, I suspect it'll work properly on a later WM/Sense build.
I'll dig in a bit and see if I can remember/discover which one had the setting..
well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.
The Jack of Clubs said:
well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.
Click to expand...
Click to collapse
I found it In Advanced Config, hit the "menu" softbutton (bottom right), then choose "more settings", then "comm manager"....you'll get a list of all the switches you can add/remove from the comm manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.
The Jack of Clubs said:
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.
Click to expand...
Click to collapse
Yeah...I don't really know how to get past that, I didn't know it had that limit because even with the 3g switch I was still only using 6.
However, when I just tested it by adding the "beaming" button, it threw up that same error, but the button still showed up, giving me a total of 7 switches in the comm manager screen. I have no idea how/why. I checked in Advanced Config again, and the beaming button was un-checked.
and yes, I get the same results when I change it from switches to large or default buttons, comm manager won't open at all.
I can't even seem to find my comm manager on the updated Tilt2 ROM.....!