Database Users

I've 'lost' my settings entry on the start menu ...

Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark

mark.peters said:
Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark
Click to expand...
Click to collapse
It is possible that you might have deleted the SETTINGS FOLDER from the File explorer/ or thru EXPLORER Sync.
The Best option would be to go for a hard reset.
There is something else you can try after taking a backup though ( I am not sure whether u shall get back all the Setting Icons though)
Simply Create a Folder <SETTINGS> in \windows\startmenu\
I HAVE NOT TRIED THE LATTER METHOD EVER THOUGH !!
PLEASE DO TAKE BACKUPS BEFORE THIS......
Regards,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
______________________
GURJEET SINGH BAGGA
Microsoft Certified Proff.
XDA-Amateur Developer and Enthusiast
[XDA2,O2MiniS,P900i,]
Say NO 2 Pirated S'Ware,Illegal Cracks
A BIG :"NO" TO WAREZ
Regardless of what others Preach & Practise.
Believe in urself And Just DO the Right Thing.

jeasbe said:
mark.peters said:
Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark
Click to expand...
Click to collapse
It is possible that you might have deleted the SETTINGS FOLDER from the File explorer/ or thru EXPLORER Sync.
The Best option would be to go for a hard reset.
There is something else you can try after taking a backup though ( I am not sure whether u shall get back all the Setting Icons though)
Simply Create a Folder <SETTINGS> in \windows\startmenu\
I HAVE NOT TRIED THE LATTER METHOD EVER THOUGH !!
PLEASE DO TAKE BACKUPS BEFORE THIS......
Click to expand...
Click to collapse
Jeasbe is right add settings folder to windows\startmenu and all will be well. No need to hard reset.

Cheers Guys ...
Simply adding the folder "Sedttings" to the start menu done the trick !!!
Still don't know how I managed to lose the damn folder, but hey who cares
Thanks again.
Mark

On a related note, anyone know how to create a link to the "Memory" settings entry? I went to the "Settings" folder but there were no links in there.
I use task manager to kill processes I no longer want that dont have an "Exit" button, but I dont know if the memory manager cleans up better than task manager....

mark.peters said:
Cheers Guys ...
Simply adding the folder "Sedttings" to the start menu done the trick !!!
Still don't know how I managed to lose the damn folder, but hey who cares
Thanks again.
Mark
Click to expand...
Click to collapse
ALL"S WELL THAT ENDS WELL..TALKING ON a Cheerful Note Mark Mebby ur "Sedttings" actually got renamed to "Sedttings"
Just Make sure U dont lose ur "PIROGHRAMS" THIS TIME !! (lol)
Glad you are back to Normal Buddy. !!

Cavey.co.uk said:
On a related note, anyone know how to create a link to the "Memory" settings entry? I went to the "Settings" folder but there were no links in there.
I use task manager to kill processes I no longer want that dont have an "Exit" button, but I dont know if the memory manager cleans up better than task manager....
Click to expand...
Click to collapse
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link.

meschle said:
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link. But it wont fix the settings error - prob need to do a hard reset for that.
Click to expand...
Click to collapse
I think you missed my point, sorry for not being clear.
I opened up windows/start menu/settings and there are no shortcuts in there (and I dont think there are meant to be).
If I click start-> settings it has three tabs and I can get to the "Memory" option in the System tab.
I have Task Manager as one of the 6 or 7 at the top of the Sart Menu, but I would rather the Memory item was there, but it doesnt seem to be an option and I cant find the .cpl file (if it exists) to make the shortcut manually.
Anyway, thanks for your shortcut, I shall see if I can use it to do what I am trying to achieve.
[Edit] Spot on. Works like a charm, thank you. Where did you get that link from? Get the info out of the registry? [/edit]

Cavey.co.uk said:
meschle said:
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link. But it wont fix the settings error - prob need to do a hard reset for that.
Click to expand...
Click to collapse
I think you missed my point, sorry for not being clear.
I opened up windows/start menu/settings and there are no shortcuts in there (and I dont think there are meant to be).
If I click start-> settings it has three tabs and I can get to the "Memory" option in the System tab.
I have Task Manager as one of the 6 or 7 at the top of the Sart Menu, but I would rather the Memory item was there, but it doesnt seem to be an option and I cant find the .cpl file (if it exists) to make the shortcut manually.
Anyway, thanks for your shortcut, I shall see if I can use it to do what I am trying to achieve.
Click to expand...
Click to collapse
oh ok you can place the link i gave you - rename it memory if you want and place it in \windows\startmenu (not start menu\programs) - may need to delete one of the other links as it only allows a few.

Yeah, I threw it into start menu/programs and it is then available from the "Menus" link in settings which sets it as one of the six or seven entries at the top.
As I said, works like a charm, thank you very very much.

Touch Pro 2 WiFi Router

This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
Updated version can be found here http://forum.xda-developers.com/showthread.php?t=538874

What precisely did you find not working in this WiFi Router?

Additional button - Row
Hi At0mAng
Personally, I use the Microsoft Direct Push button/row so wouldn't want to loose it to this. Is there any possibility of making a version that adds an additional button to the Comm Manager?
Cheers
andrew-in-woking

If I have uesed the ruter it is inposible to get conect to internet after.
In the begining I thourgh it was low 3g /hi but I found if I conect my tp2 as a modem or use the ruter again, it is no problem surfing whit the computer but still not whit the phone.
Any out there who has a solution or an idea?
ka

eac said:
What precisely did you find not working in this WiFi Router?
Click to expand...
Click to collapse
From what I recall on the Touch Pro it was easier to start the router and did not have to enable the settings to automatically use the settings when starting. Othe than that it has been working well for me.
Yes I can make a version where direct push is left alonr or you can install this and use advance config to place direct push back on comm manager.

What's different from THIS version? That version works just fine on my Vario V.
Don't have the CommManager link but it works just fine running it from the connections tab.

works nice!!!
thanks you very much i really
will use this!!

- Not found 3g connection. Only slow GSM.
- Delete Direct Push button, not adds an additional button to the Comm Manager

0n my tp the app dosent start from the com manager - i thought it didnt install until i found it in a new folder within the programs folder called network center...
so, when i start the app its interface is too tall for the tp - the checkbox is below/behind the software keyboard icon...
so,i dont knnow how to get it to work since what i see is so different from the instructions. can someone offer any guidance? seems t me that the wifi chip needs to be on but it keeps finding available networks and th wifi router doesnt seem to do anything.... yep, am having issues!

Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.

mccune said:
Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.
Click to expand...
Click to collapse
I am not sure what the difference is. I would guess it is no different since everyone is getting the package from the same place...

At0mAng said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
The following CAB will also place the WiFi Router on the Comm Manager, it will replace Microsoft Direct Push.
Please follow instructions for it to work properly:
Install At0mAng WiFi Router.cab
Restart your phone
Open Comm Manager
Tap where it reads Internet Sharing to bring up WiFi Internet Sharing, if you tap the On/Off button it will bring up the USB Internet Sharing
Set the Router name and password you would like.
Set the option to always use these settings without asking
Close WiFi Router
Go back to Comm Manager
Restart WiFi Router
You should be able to connect now.
Click to expand...
Click to collapse
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking

i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..

xdadJeroen said:
i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..
Click to expand...
Click to collapse
No, the phone has WiFi that should work fine with your home router. This program turns your phone into a WiFi router, so you can connect a laptop to your phone (by WiFi) and get internet access for the laptop when away from home.
Gordon

and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?

julienrl said:
and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?
Click to expand...
Click to collapse
this one is free thats why

redd214 said:
this one is free thats why
Click to expand...
Click to collapse
oh... i like that! lol
Does it provide the tethering charge workaround too? and does it have a crash cleanup? (TP2 is in the mail so I can't test )

When I change the settings, set always use and close, on returning the settings have gone back to default.
How do I change the settings permanently?

A new version is out in the Development and Hacking forum that resolves some issues of this one.
Look for a post by Noonski.

andrew-in-woking said:
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking
Click to expand...
Click to collapse
Here you go...
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:00000008
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="Bluetooth"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]
"Execute"="\\Windows\\repllog.exe"
@="AUTD"
"ExecuteCommand"="//remote"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\5]
"Execute"="\\Windows\\WiFiNetwork.exe"
@="WLAN"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\4]
"Execute"="\\Windows\\CMInternetSharing.exe"
"ExecuteCommand"="cplmain 50"
@="InternetSharing"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\3]
"Execute"="\\Windows\\ConnectionSetup.exe"
@="DataDisconnection"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\2]
@="3G"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\1]
"Execute"="\\Windows\\CMPhone.exe"
@="Phone"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\0]
@="FlightMode"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\BCMSDDHD1"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\DataDisconnection]
@="DataDisconnect.exe"

how to turn off 3g on tilt 2

Is there a way to turn off 3g, if not using on the tilt 2? it's draining my battery. wktask failed on me, gave me errors and froze the phone. are there other similar apps like wktask?

Install the advanced configurator tool (search) and enable Band Selection in the phone settings.

Just go to the built in comm manager and switch it off....
well Im using NGGz 6.5 rom and the last option on the list is 3G, just tap the little on/off switch works great for me.
Although by the sounds of it maybe this option is not available on your rom?

not sure where the built in comm manager in...
i'm using the standard rom..i just got this phone a few days ago.l havent flashed it yet.

settings
if its anything like the stock TMOUS ROM slide over to the settings tab and look for communications tap that and down at the bottom it should be there.

so i'm noticing that my data connection always get turned on by itself. any i dea why? i set all my outlook exchange and email to manual sync...
if not, i did find this cab that can disable it..i'll give it a go and see if it will work

I think WMLongLife should do what you want. I haven't tried it, but there are reports of it working with various TP2s.

Hi folks
tech savvy and search friendly i may be BUT,,, i cant get the 3g to go off on a htc tilt 2.. ive tried about all and searched till i have no fingers ..i cant get the communications manager to stop to imout a new one .. nothing.. anyone PLEASE help.. i got this phone free new for a fuze and im really happy EXEPT at&t or whomevers right that revoved the ability to switch bands ..i hate to be flamed,, but if thatas the way you guys want to be u r loss.... i have searched.. even with windows longlife it reverts to 3g...i loved the fuze,, and thanks to you guys here ,, you made it very nice.. i put a new manager and snaps in the other and it worked .. my two new ones no luck..anyway i have a tilt 2.. st7377.. anyones help is appreciated as i like the phone.. just no d pad..

On my European TP2 with stock ROM I do this to switch off 3G:
Settings tab > Communication > Telephone (not the on/off switch!! Just tap the phone icon or title) > Band > GSM
and you are done. If it switches on 3G after that, it's bugged somehow.

hello
thanks for the input ,, any fix for the issue ? that is exactly what im seeing ,, it goes right back to 3g.. i have tried it all just about..cant get the communications manager to stop or id try duttys 10 button.. but it refuses to install..not really wanting to swap the rom ,,,YET.. just want 3g to go to h*ll. imput hill if you wanna.. but you know what i mean!!

Just got my Tilt 2. I couldn't believe there is no way to turn off 3G in the stock ROM settings as there was on my Treo 750. I looked into the Advanced Configuration Tool and the WMLongLife tool. They are both incredible but are overkill for me. I just want to be able to manually turn 3G off and on. I found something on Handango dot com that seems to work well. It is called Bandswitch and is made specifically for HTC windows phones. Only problem is its ridiculous price, $14. But it seems to keep 3G off until I enable it again. It also has some other features regarding wifi and bluetooth. It has a trial version so I hope some of you try it out and let me know your pros and cons. I am surprised by how little discussion there is on this subject.

install that cab from the previous post and soft reset your phone. it should work. if not, you will need to go to comm. manager and turn off 3g.

anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.

The Jack of Clubs said:
anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.
Click to expand...
Click to collapse
Hey man...I actually enabled that switch in comm manager with a setting that was buried in one of the regular config apps we use (total commander, HD tweak, Rhodium settings tool), I just can't remember which right now.
It put the switch you're talking about on the comm manager screen, right below the data connection spot. But...on my 6.1 ROM it doesn't have any effect, I suspect it'll work properly on a later WM/Sense build.
I'll dig in a bit and see if I can remember/discover which one had the setting..

well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.

The Jack of Clubs said:
well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.
Click to expand...
Click to collapse
I found it In Advanced Config, hit the "menu" softbutton (bottom right), then choose "more settings", then "comm manager"....you'll get a list of all the switches you can add/remove from the comm manager.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.

The Jack of Clubs said:
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.
Click to expand...
Click to collapse
Yeah...I don't really know how to get past that, I didn't know it had that limit because even with the 3g switch I was still only using 6.
However, when I just tested it by adding the "beaming" button, it threw up that same error, but the button still showed up, giving me a total of 7 switches in the comm manager screen. I have no idea how/why. I checked in Advanced Config again, and the beaming button was un-checked.
and yes, I get the same results when I change it from switches to large or default buttons, comm manager won't open at all.

I can't even seem to find my comm manager on the updated Tilt2 ROM.....!

Imagio WM 6.5 Start UP/Services Clean Up

I'm a Windows Technician for PC, this is the first time I have jumped into the world of Windows Mobile. I bought a Imagio with Windows 6.5 from Verizon wireless and I'm trying to clean it up as much as possible "like I would my pc" and hopefully extend the life of my battery in the process. I installed SKTools and so far I have managed to lower memory usage to 50 %
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3
DelWMPTempFolder.lnk;4
PKG.lnk;5
HTCStartUp.lnk;6
Voice Command.lnk;7
RunCC.exe;0
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0:
HTCGeoSrvc;Started;HGS0:
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0:
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:
Any input on any unnecessary Item above is much appreciated!

Push internet
I didn't see it there. did you disable it too?

Push Internet
I have disabled push mail for Outlook at Comm Manager, is this is what you refer too then yes.
Thanks

bastukee said:
I have disabled push mail for Outlook at Comm Manager, is this is what you refer too then yes.
Thanks
Click to expand...
Click to collapse
Push internet was a new feature introduced that made it so pages you specify on the internet tab would automatically be downloaded in the background according to a schedule. When you visit the link on the internet tab, you bring up a cached (and reasonably updated based on schedule) version that loads much faster.
Disabling push internet disables your phone from downloading the pages, which results in better battery (less data transfer) and more memory (less instructions sitting in memory.)

So what have people been disabling...please specify the file instead of telling me like push internet..cause there isn't a file that says push internet. I've been trying to figure out what services, and startup programs I can do without. Thanks in advance!

Seems like a tons of crap in there: I'm no expert but
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3 Delete
DelWMPTempFolder.lnk;4 Delete
PKG.lnk;5 Delete???
HTCStartUp.lnk;6
Voice Command.lnk;7 Delete
RunCC.exe;0 Delete
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0 Delete ???
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0: Delete
HTCGeoSrvc;Started;HGS0: Delete
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0: Delete
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:

Thanks player911...if anyone can add to his list it would be greatly appreciated...especially the startup stuff!!

how can I add an .exe start up when the Imagio turns on

slumpey326 said:
how can I add an .exe start up when the Imagio turns on
Click to expand...
Click to collapse
Using Touch Commander you can select the exe file then go to File and >>>>>>>>> on the menu. Pick Create shortcut. Click on Tree and browse to \Windows\Startup and say OK. You now have a shortcut (.lnk file) to that exe in the Startup folder which will start on next boot.

player911 said:
Seems like a tons of crap in there: I'm no expert but
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3 Delete
DelWMPTempFolder.lnk;4 Delete
PKG.lnk;5 Delete???
HTCStartUp.lnk;6
Voice Command.lnk;7 Delete
RunCC.exe;0 Delete
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0 Delete ???
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0: Delete
HTCGeoSrvc;Started;HGS0: Delete
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0: Delete
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:
Click to expand...
Click to collapse
Sorry for the stupid questions, but I am no where near the level of computer knowledge some of you guys have so be patient.
1) when looking for these programs, are you finding them in the file explorer?
2) if they are deleted, are then gone for good. I would hate to get rid of something and then realize I needed it cause if I screw it up, there is no way I am fixing it right back like some of you guys or gals can do.
My imagio though was running around 60% when I had sense UI on it, but with the HTC touch flo home screen on, it is running around 70-80% so getting it down will be a big help.
Thanks in advance.

player911
I have deleted the Items you have recomended on my start up and it works good so far.
I Googled the services you have recommended and they seem to be of use, "I'm no expert on them" so I have left them for the time being.
psalm462
I being using SKTools, is basicly a full suit of diferent tools, including one I would say resembles msconfig from Xp/Vista/Win7 where you can disable items and re-enable them in case you need too. I disabled TouchFlow and the TV Icon thing and that alone freed about 20% of memory.

Here is what I have. Even with Shozu running, I am running at about 57-60%
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Very difficult to follow your list by Images
I have lowered my Memory usage to 41 % upon boot with these 2 cabs, I can confirm they work good on my Imagio.
http://forum.ppcgeeks.com/showthread.php?t=85996
Original and More tweaks
http://sskusers.net/support/showthread.php?t=149

I cant get sktools to install keeps telling me it is not a pocket pc app and yes I checked to ensure I dl the wm6 ver.Any ideas?

Not sure, but I can think of a few things. How are you installing it? Did you get the .cab for SKfile or a exe? Also I suggest updating your .Net Framework to version 3.5
http://rapidshare.com/files/123693999/NET_CF_3.5.7283.cab

I have 3.5 running thx.What the message tells me is that I dont have a PPC.Strange

It says "sksetup is not a valid Pocket PC application. I have dl the wm ver from the sk web site

randcool said:
It says "sksetup is not a valid Pocket PC application. I have dl the wm ver from the sk web site
Click to expand...
Click to collapse
Make sure it's for PocketPC (touchscreen) and not Smartphone (non-touchscreen).

supertrac said:
I didn't see it there. did you disable it too?
Click to expand...
Click to collapse
There isn't Push Internet on the Imagio, it is only on the TP2.

Not sure what I am doing wrong but when I dl the WM 6 ver it still says Not the ver for a ppc I know I am missing something but don't know what it is.

Screen Alignment ?

My Leo just cant get my tap right... it's liitle bit to the left ?
Where I can find the screen alignment menu ? seems to be deleted in HD2..
PLS HELP !!

All settings ---> System ----> screen

xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
or more like Start Menu> settings> Menu> All settings.

Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Thanks..,,,, I was looking for Icon ....

Is there anyway to reset it back to default settings?

Rossimac said:
Is there anyway to reset it back to default settings?
Click to expand...
Click to collapse
If anyone got a solution for this, please let it know!

I think there is no "default setting". First time when flash it will prompt to set screen alignment.

Is there no screen alignement at the first startup of the HD2

xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.

I tried looking under the windows folder for a "screen alignment" or "alignment" application. No luck!!
Anybody else having this issue or is it just me.....

Arite....no luck...
I am returning my phone....
Sticking with TP2 till my service renewal....

DesperateScorpion151 said:
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.
Click to expand...
Click to collapse
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.

johncmolyneux said:
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.
Click to expand...
Click to collapse
TMo USA HD2's don't have that item! I agree with other poster that we have been left out of that feature!
Can anyone tell me what file the icon points to so I can see if maybe Tmo USA just didn't give us an icon on the system screen?
Thanks,
Gordo

screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.

samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
And that damn fine thread comes to the rescue yet again! We need a superman logo smilie for when anyone mentions that thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hah, nice.
edit - just tried to see thru the neighbours bedroom curtains, seems x-ray vision doesn't come as standard.

samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
Fantastic! Thanks, it worked!
Gordo

Ahh, thank goodness. My screen alignment was driving me crazy, and of course, having a weird Tmous phone, the setting was nowhere where one would expect it to live in WinMo. You just made my phone 100% more lovable.

I have a problem with my screen alignment although I'm not sure it's the same problem as above.
Since updating my phone to the latest official ROM yesterday my home screen has shifted up by about 3mm.
My network indication is now partially hidden by the Start and notification bar at the top and a small strip of the basic WinMo wallpaper is visible below the Home/People/Messages/etc bar at the bottom.
Any suggestions?

The screen option in settings is hidden on the T-Mobile HTC HD2. You can make it visible in the registry
HKEY_LOCAL_MACHINE\ControlPanel\Pen
Set the value of "Hide" to 0 (currently it is 1). Then the screen option will be visible in the system folder under all settings.
hopes it helps