I've 'lost' my settings entry on the start menu ... - 8125, K-JAM, P4300, MDA Vario General

Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark

mark.peters said:
Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark
Click to expand...
Click to collapse
It is possible that you might have deleted the SETTINGS FOLDER from the File explorer/ or thru EXPLORER Sync.
The Best option would be to go for a hard reset.
There is something else you can try after taking a backup though ( I am not sure whether u shall get back all the Setting Icons though)
Simply Create a Folder <SETTINGS> in \windows\startmenu\
I HAVE NOT TRIED THE LATTER METHOD EVER THOUGH !!
PLEASE DO TAKE BACKUPS BEFORE THIS......
Regards,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
______________________
GURJEET SINGH BAGGA
Microsoft Certified Proff.
XDA-Amateur Developer and Enthusiast
[XDA2,O2MiniS,P900i,]
Say NO 2 Pirated S'Ware,Illegal Cracks
A BIG :"NO" TO WAREZ
Regardless of what others Preach & Practise.
Believe in urself And Just DO the Right Thing.

jeasbe said:
mark.peters said:
Any ideas as to how I can access the WM5 settings pages without using the Start Menu ? Not sure where my settings menu entry has gone either
Cheers
Mark
Click to expand...
Click to collapse
It is possible that you might have deleted the SETTINGS FOLDER from the File explorer/ or thru EXPLORER Sync.
The Best option would be to go for a hard reset.
There is something else you can try after taking a backup though ( I am not sure whether u shall get back all the Setting Icons though)
Simply Create a Folder <SETTINGS> in \windows\startmenu\
I HAVE NOT TRIED THE LATTER METHOD EVER THOUGH !!
PLEASE DO TAKE BACKUPS BEFORE THIS......
Click to expand...
Click to collapse
Jeasbe is right add settings folder to windows\startmenu and all will be well. No need to hard reset.

Cheers Guys ...
Simply adding the folder "Sedttings" to the start menu done the trick !!!
Still don't know how I managed to lose the damn folder, but hey who cares
Thanks again.
Mark

On a related note, anyone know how to create a link to the "Memory" settings entry? I went to the "Settings" folder but there were no links in there.
I use task manager to kill processes I no longer want that dont have an "Exit" button, but I dont know if the memory manager cleans up better than task manager....

mark.peters said:
Cheers Guys ...
Simply adding the folder "Sedttings" to the start menu done the trick !!!
Still don't know how I managed to lose the damn folder, but hey who cares
Thanks again.
Mark
Click to expand...
Click to collapse
ALL"S WELL THAT ENDS WELL..TALKING ON a Cheerful Note Mark Mebby ur "Sedttings" actually got renamed to "Sedttings"
Just Make sure U dont lose ur "PIROGHRAMS" THIS TIME !! (lol)
Glad you are back to Normal Buddy. !!

Cavey.co.uk said:
On a related note, anyone know how to create a link to the "Memory" settings entry? I went to the "Settings" folder but there were no links in there.
I use task manager to kill processes I no longer want that dont have an "Exit" button, but I dont know if the memory manager cleans up better than task manager....
Click to expand...
Click to collapse
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link.

meschle said:
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link. But it wont fix the settings error - prob need to do a hard reset for that.
Click to expand...
Click to collapse
I think you missed my point, sorry for not being clear.
I opened up windows/start menu/settings and there are no shortcuts in there (and I dont think there are meant to be).
If I click start-> settings it has three tabs and I can get to the "Memory" option in the System tab.
I have Task Manager as one of the 6 or 7 at the top of the Sart Menu, but I would rather the Memory item was there, but it doesnt seem to be an option and I cant find the .cpl file (if it exists) to make the shortcut manually.
Anyway, thanks for your shortcut, I shall see if I can use it to do what I am trying to achieve.
[Edit] Spot on. Works like a charm, thank you. Where did you get that link from? Get the info out of the registry? [/edit]

Cavey.co.uk said:
meschle said:
I dont know why you lost the memory tab on settings - i guess your cpl (control panel applet) must be corrupt. You can add a link to memory via startmenu or phm traylaunch using the attached link. But it wont fix the settings error - prob need to do a hard reset for that.
Click to expand...
Click to collapse
I think you missed my point, sorry for not being clear.
I opened up windows/start menu/settings and there are no shortcuts in there (and I dont think there are meant to be).
If I click start-> settings it has three tabs and I can get to the "Memory" option in the System tab.
I have Task Manager as one of the 6 or 7 at the top of the Sart Menu, but I would rather the Memory item was there, but it doesnt seem to be an option and I cant find the .cpl file (if it exists) to make the shortcut manually.
Anyway, thanks for your shortcut, I shall see if I can use it to do what I am trying to achieve.
Click to expand...
Click to collapse
oh ok you can place the link i gave you - rename it memory if you want and place it in \windows\startmenu (not start menu\programs) - may need to delete one of the other links as it only allows a few.

Yeah, I threw it into start menu/programs and it is then available from the "Menus" link in settings which sets it as one of the six or seven entries at the top.
As I said, works like a charm, thank you very very much.

Related

[new release] btCrawler - Bluetooth Diagnostic tool v1.1.0 beta

[dead and buried] btCrawler - Bluetooth Diagnostic tool v1.1.0 beta
Folks,
I just wanted you to inform about release version 1.0 of btCrawler.
New features are:
- Redesigned the Smatphone UI. Handling should be better now.
- Added Bluejacking for both PPC and SP
- Added file transfer over BT and IRDA (PPC only)
- Added Bluesnarfing code (PPC only)
- Created CAB installer
TODO:
- Write a documentation
Get it from here: http://www.silentservices.de/btCrawler.html
*** UPDATE 09.02.2007***
Version 1.1.0 beta is out.
Changes are as follows:
Added Bluesnarfing for Smartphones...
- Added Logging (Logfile goes to \My Documents\btc-devicelog.txt)
- Added File Open Dialog to the Transfer Page
- Added an options dialog (in main screen press menu->options)
- Added bluetab exploit (to activate create a dword with the name "ISC-Sploits" and a value of "1" under HKCU\Software\Microsoft\Bluetooth\Mode) Then you will have a new Button in the main screen. There you can active the bluetab sploit. (Reference: Google for Qnix and bluetab) BE RESPONSIBLE!!!
- This is a beta release. Some things may work, others not...If you find a bug, please send me an email.
Cheers
nice app.
only issue is I don't have an icon for the program?
It's just the generic white program box, yet under the .exe properties, I see the BT/Target icon, so it's close...
Thanks a lot for your feedback. I thought that I fixed the icon thing...
I'll put it on my todo list and check it again.
cheers
Thanks. It works great. To putt a icon by your programs you must make up a Shortcut and cut/paste it in your Windows/startup menu/programs folder.
diemetdiesnor said:
Thanks. It works great. To putt a icon by your programs you must make up a Shortcut and cut/paste it in your Windows/startup menu/programs folder.
Click to expand...
Click to collapse
yeah, i'm aware of that but we're talking about the icon for a shortcut...I don't have one, it's a generic program-box icon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The icon in programs.
This is getting OT I think...but here we go
The icon not in .exe file
The icon not in SmallMenu Plus
You are right. I haven't seen yet.
OK, I fixed the Icon bug and also a bug in the cab. A shortcut link is now created in the startmenu.
Thx for the hints!
Direct download of v1.0.1 > http://www.silentservices.de/btcrawler-v1.0.1.CAB
c0rnholio said:
OK, I fixed the Icon bug and also a bug in the cab. A shortcut link is now created in the startmenu.
Thx for the hints!
Direct download of v1.0.1 > http://www.silentservices.de/btcrawler-v1.0.1.CAB
Click to expand...
Click to collapse
Thats it! working as it should now.
nice job.
how is this installed please?
thankyou
digidude said:
how is this installed please?
thankyou
Click to expand...
Click to collapse
Just copy the cab file (version 1.0.2 as of now) to your device and click it. It will then be installed.
i have downloaded the latest version and copied it to my xda
its showing as an xml file called _setup and 2 unknown files BTCRAW~1.000 and BTCRAW~1.001
thanks for looking
I see one small problem - oushing Transfer without prior scanning causes end of application
And it's released 28.8, while today is 24.8
Hi Marx2,
Marx2 said:
I see one small problem - oushing Transfer without prior scanning causes end of application
Click to expand...
Click to collapse
Can you explain that any further? You start btCrawler and directly press the Transfer button. Then the program exits. Have I got this right?
Marx2 said:
And it's released 28.8, while today is 24.8
Click to expand...
Click to collapse
That's correct. It's a future release ;-) Thanks, I fixed it...
yes, oushing=> pushing
I also see enormous battery drain while scanning/in transfer mode. hovewer probably it's normal? or maybe it's my OS fault? I use 1.0, will try the newest.
I also don't understand interface, after scanning you can click on discovered device, or choose it from combo box. What's difference?
In transfer mode one device sometimes show a few entries with different services, nice to know which one to use to send file/message/bluesnarf.
Is it possible to snarf adressbook only, or for example files/images too?
Anyway I use MDA2, if you want to know
Marx2 said:
I also see enormous battery drain while scanning/in transfer mode. hovewer probably it's normal? or maybe it's my OS fault? I use 1.0, will try the newest.
Click to expand...
Click to collapse
Yes, the battery drain might occur when using active scanning, but there's nothing I can do about.
Marx2 said:
I also don't understand interface, after scanning you can click on discovered device, or choose it from combo box. What's difference?
Click to expand...
Click to collapse
If you want to make a SDP query for a device you must first select it from the drop down box. The listbox has no additional function.
Marx2 said:
In transfer mode one device sometimes show a few entries with different services, nice to know which one to use to send file/message/bluesnarf.
Click to expand...
Click to collapse
The program shows multiple entries for a device if this device offers multiple services for transfer. Rule of thumb: For bluesnarfing you stick with Object Push. For file transfer you can use all. I personaly always use Object Push.
Marx2 said:
Is it possible to snarf adressbook only, or for example files/images too?
Click to expand...
Click to collapse
Currently only the address book is snarfed but maybe I will add the grabbing of all other (like send/received SMS, call history and so on...)
As for the rest: You are right. I should write some kind of documentation but unfortunately I'm currently out of time.
after enabling BlueSnarf pushing Transfer doesn't cause end of program (?)
In transfer mode new discovered devices gains automatically focus. They shouln't because you can accidentally sent message to another person
Abot BlueSnarfing other thing - images seems to give most fun because you can make great jokes with them
Marx2 said:
after enabling BlueSnarf pushing Transfer doesn't cause end of program (?)
In transfer mode new discovered devices gains automatically focus. They shouln't because you can accidentally sent message to another person
Abot BlueSnarfing other thing - images seems to give most fun because you can make great jokes with them
Click to expand...
Click to collapse
Hm, never had that problem with the program exiting on my devices...but if it's gone and no other has similar probs...
I'll check about the autoselct option and will fix it for one of the next releases.
I'll check the pictuer grabbing if I get my SE T610 back...
i've tied snarfing on my own s55 and Nokia 6010 without success
It would be nice to have optional logging of which phone was snarfed un/successfully

cant find vjtoggletoday???

i am trying to find Vjtoggletoday that has the setting to change the width of you today bar and bottom bar or if there is anything similar to it maybe with auto-hide for the today bar and bottom bar.
thanks,
You could use Wisbar Advance Desktop http://www.lakeridgesoftware.com/products.php?prod=WisBar+Advance+Desktop
There is a small learning curve but the possibilities are almost endless.
try http://www.vijay555.com/?Releases
KidGixxer said:
try http://www.vijay555.com/?Releases
Click to expand...
Click to collapse
i checked already and its not there.
From what I can tell, vjToggleToday was never finished. The last version I saw was in alpha form and you need to create a shortcut with a command switch to make it work. I'm using dcinobar to remove the bottom toolbar and it's flawless. Install the cab, soft reset, done.
*edit* I do have the alpha version of vjToggleToday if you want it.
jhendrickson said:
From what I can tell, vjToggleToday was never finished. The last version I saw was in alpha form and you need to create a shortcut with a command switch to make it work. I'm using dcinobar to remove the bottom toolbar and it's flawless. Install the cab, soft reset, done.
*edit* I do have the alpha version of vjToggleToday if you want it.
Click to expand...
Click to collapse
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
aih1977 said:
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
Click to expand...
Click to collapse
I only have cab to hide the bottom one.. not sure who built it but I found it some where.. it's been working fine for me.
I'd like to know how to hide the top one too.. if possible.
Here's the cab.
Taeksoo
Do any of these allow the tray app to be moved?
Can anyone assist with letting me know if these allow you to relocate any tray launch applications right to the bottom of the screen?
aih1977 said:
thanks, but not what i am looking for.
i saw some where long time ago one with settings that i can add a number on how much i want to hide on both top and bottom bars. i tried google it and i tried to search here too but no luck.
Click to expand...
Click to collapse
I posted details on this when I installed VJToggleTodayAlpha last time -- here you go.
The problem that I'm having now is that I don't get the "Open With..." prompt on the context menu for the app from my File Explorer (on press+hold). Wierd...
noahv said:
I posted details on this when I installed VJToggleTodayAlpha last time -- here you go.
The problem that I'm having now is that I don't get the "Open With..." prompt on the context menu for the app from my File Explorer (on press+hold). Wierd...
Click to expand...
Click to collapse
sorry i tried it but it is not working. also i remember that someone had created the program as an exe file so you dont have to do all that mumbo jumbo with the file explore. i am trying to find that file again but thanks for your help.
aih1977 said:
sorry i tried it but it is not working. also i remember that someone had created the program as an exe file so you dont have to do all that mumbo jumbo with the file explore. i am trying to find that file again but thanks for your help.
Click to expand...
Click to collapse
Tell me where will you run the vjtoggletoday.exe from (where will you place the exe) and I will create the shortcut for you.
KarhU said:
Tell me where will you run the vjtoggletoday.exe from (where will you place the exe) and I will create the shortcut for you.
Click to expand...
Click to collapse
\Program Files\VJtools
One more thing this will bring up the config option? thanks!
I have created shortcuts for you - in the attached Zip file. Copy the vjtoggletodayiialpha.exe to the Windows folder, vjtoggletodayAutorun.lnk to Windows/StartUp folder (if you want the program to be run at every boot) and copy vjtoggletodayConfig.lnk wherever you see fit.
Edit: I will put it to the folder you chose. You can try if config works on this version. And yes the config works (tested)
Links updated to your location. Hope it will work for you. If you changed the name of the exe (then the lnk will not work), or will change the location of the exe in the future you can edit the link in desktop windows in notepad.
KarhU said:
Links updated to your location. Hope it will work for you. If you changed the name of the exe (then the lnk will not work), or will change the location of the exe in the future you can edit the link in desktop windows in notepad.
Click to expand...
Click to collapse
THANKS!!!!
Thanks guys.
VJToggleToday II was not finished as it straddled PPC2003 and WM5.
I've subsequently finished version III as a research app for my use, and version IV will be released, eventually, for you guys.
It's context sensitive, enlarges only the today screen, but the bars are back as they should be in normal use. Works quite nicely. I'm away for a bit, but will be back coding hard soon.
V
vijay555 said:
Thanks guys.
VJToggleToday II was not finished as it straddled PPC2003 and WM5.
I've subsequently finished version III as a research app for my use, and version IV will be released, eventually, for you guys.
It's context sensitive, enlarges only the today screen, but the bars are back as they should be in normal use. Works quite nicely. I'm away for a bit, but will be back coding hard soon.
V
Click to expand...
Click to collapse
That is a great news vijay. Thanks for your efforts! Anyway there is only one thing that I did not like about the version we are using - it shrinks both top and bottom bar - I do not mind getting rid of bottom bar, but top one conveys much more information, but this is user definable so no big deal.
Current version, VJToggleToday II, has registry settings or a hidden config dialog that can be used to specify what height you want each bar. That way, you can leave the top bar at its default height of 26 pixels, and only shrink the bottom bar. I believe you just launch it from a shortcut, with a command line of -config or config.
Check the main thread for clarification.
Hiding the top bar was only really for my own use, inorder to use it with a special skin I wrote to replace the top bar:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VJToggleToday II was only ever distributed through this site I believe, never on my own websites, as it was still R&D, not final. If anyone's looking for it, look on this site!
V

NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE

HI,
NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE
DOWNLOAD View attachment 83470
DOWNLOAD View attachment 83376
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi from Luigi.ING
Dude, do you mind posting what is the big deal with these items you are posting? Are these items improvements over the prior versions which slow down the TC?
TIA!
Hi
I like this task manager, since I tried it on bepe ROM.
Can you indicate me to translate it in another language.
Thanks
Cool. Thanks for the additional info. However, the question still stands: does this version slow down the device as did the prior versions?
this one is great, running perfect on my Kaiser also. Thank you sooo much
thanks alot for the great find!!
THX!
But seems lack of some files like up(down)_enable(disable)_*.bmp , there's no up&down arrow in the list. And quickmenuicon just for QVGA, cant fit to VGA, I think must modify the REG LauncherUp and LauncherDown, but dun know how
liay said:
THX!
But seems lack of some files like up(down)_enable(disable)_*.bmp , there's no up&down arrow in the list. And quickmenuicon just for QVGA, cant fit to VGA, I think must modify the REG LauncherUp and LauncherDown, but dun know how
Click to expand...
Click to collapse
Hi copy the missing files into windows folder i forgot them also in the Oem in the other thread from luigi.ing here
(http://forum.xda-developers.com/showthread.php?t=387912)
http://rapidshare.de/files/39255366/TaskmFix.zip.html
Teijak
hi people any one got cab to make index menu large like in bepes rom ? thanks to who can help..
Thank you, Teijak
The arrow come back
Now the only thing is I dont know where to find the QuickMenuIcon, so cant modi it to fit VGA
liay said:
Thank you, Teijak
The arrow come back
Now the only thing is I dont know where to find the QuickMenuIcon, so cant modi it to fit VGA
Click to expand...
Click to collapse
I dont have a VGA device. Does it look bad, to small?
Sorry i think here i can not help you.
Teijak
Map a shortcut?
I have been reading about third party apps to get to "a" task manager. Is it even possible to map a shortcut to this TaskManager if you are already on the Today Screen?
I would like to eliminate grabbing the stylus to start the task manager. Hitting the the volume was resolved by using WisVol.exe. Can the same be done with the TaskManager with Wisbar? I'll ask this same question in other forums and threads if applicable?
Nice it works! on htc touch cruise wm6 nl
luigi.ing said:
HI,
NEW HTC TaskManager 2_1_33556_1 Large Icon ITA-WWE
DOWNLOAD View attachment 83470
DOWNLOAD View attachment 83376
Hi from Luigi.ING
Click to expand...
Click to collapse
Hi,
Is it possible to force big button use ?
Mine become little button after first use.
OK, I have find
"EnableLargeIcon"=dword:00000001
Mine seems have been reseted to 0 after options modifications.
Thanks
Moo
MooCan said:
Hi,
Is it possible to force big button use ?
Mine become little button after first use.
Thanks
Moo
Click to expand...
Click to collapse
Tap on the 'spanner' icon for settings > others tab then you can choose large size.
Abbsta said:
Tap on the 'spanner' icon for settings > others tab then you can choose large size.
Click to expand...
Click to collapse
What is this spanner icon? I went to the options menu but don't see a setting.
spanner is the options menu (middle icon in the task manager)
but i have also no "others" menu in mine (bepe 0.64 rom default manager)
But you can nonetheless adjust the "EnableLargeIcon" registry tweak
posted before and it works.
Registry tweak (seems also to work with older Task Managers)
HKCU\Software\HTC\Taskmanager ->
DWORD "EnableLargeIcon"
VALUE: 1
But I noticed, that the Task Manager seems to reset the Large Icon setting
again to "0" if you enter the the Task Managers Options menu
However, if you do the registry tweak and avoid to enter the options menu
afterwards it seems to stay large.
Olioaglio
Olioaglio said:
spanner is the options menu (middle icon in the task manager)
but i have also no "others" menu in mine (bepe 0.64 rom default manager)
But you can nonetheless adjust the "EnableLargeIcon" registry tweak
posted before and it works.
Registry tweak (seems also to work with older Task Managers)
HKCU\Software\HTC\Taskmanager ->
DWORD "EnableLargeIcon"
VALUE: 1
But I noticed, that the Task Manager seems to reset the Large Icon setting
again to "0" if you enter the the Task Managers Options menu
However, if you do the registry tweak and avoid to enter the options menu
afterwards it seems to stay large.
Olioaglio
Click to expand...
Click to collapse
You can enable or disable large Icons with rom settings tool from bepes rom and many other settings too.
Teijak
Thanks....
The new program works great on HTC 3470. The one came with the OS was buggy and often disappeared. This new one works great. Thanks.
One thing is that if you you in and change the settings then the large icon disappeared. Any ideas how to get it back? Registry setting?
Thanks
Error Installing Italian Version
Hi Luigi.ing
I try to install both version on my Kaiser, The WWE version is working correctly but I'm not able to install the ITA version I got the invalid certificate error.
do you have any suggestion?
Thanks
E

[WAD] Simplicity Theme FIXED!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A theme i made with simplicity in mind. Does only the basics that I personally use. May not suit all but of course feel free to modify as you need!
PLEASE NOTE:
This theme was made for my Touch Diamond so some shortcuts/buttons may not function correctly depending on your phone.
This can be fixed by click-holding and correcting the target yourself.
Requirements:
- Wisbar Advance Desktop 2
- Mortscript (located at the bottom)
Instructions:
Make sure you have Wisbar Advance Desktop installed first on your Device. NOT STORAGE.
Install the CAB also on device.
Simple!
Known Issues:
The Notifier for SMS does not clear when reading sms in the Messages Tab.
This is a scripting problem with the program and not the skin itself and thus i cannot do much about.
Click to expand...
Click to collapse
Donations are welcomed - Thankyou
​
EDIT: Forgot to say that tapping the Carrier/Battery area shows the System information dock, and tapping the clock shows the Calender Dock.
will this work on WAD 3 ?
how can i change the shortcut of the sms page??
my rom is in Ptg and i have to do some changes
the theme is fantastic
tks
Krzy: Sorry i have no idea as im using Advance Desktop 2. Tbh is there even a ver 3 out? or all u talking about "Wisbar Advance"
Over_limit: Make sure Author mode is on which means you can edit the theme. Click and hold the item you wish to modify. Im not sure what changes you need to make, maybe a little more info and i could help
m00moo said:
Krzy: Sorry i have no idea as im using Advance Desktop 2. Tbh is there even a ver 3 out? or all u talking about "Wisbar Advance"
Over_limit: Make sure Author mode is on which means you can edit the theme. Click and hold the item you wish to modify. Im not sure what changes you need to make, maybe a little more info and i could help
Click to expand...
Click to collapse
yes i no, but here is the link to open the sms box? in the sms page?
Sorry, so you mean you wish to change the target location of the "Send New" button on the messages tab?
WAD is not Wisbar Advence Desktop ? IF yes ... yes there is ver 3 out ....
EDIT: Sorry My mistake. ver is WisBAr Advance Without Desktop
Wow, this looks amazing!!
Whenever I install WAD again, I will definitely try your theme!!
m00moo said:
Sorry, so you mean you wish to change the target location of the "Send New" button on the messages tab?
Click to expand...
Click to collapse
in this is ok but i can´t see my sms on the screen.
Doesn't work on Kaiser,nice theme though bruv.​
I'm probably missing something out, but I can't get this theme to work.
I've got Wisbar Advance Desktop
I installed Mortscript
I copy the cab for the theme to my device and installed it
When to the Wisbar config, and selected the theme (not much seemed to happen)
The background of the default home screen changed to black for a second, and then went back to the default
I tried a soft reset, but still no theme....what am I doing wrong?
Mittens said:
I'm probably missing something out, but I can't get this theme to work.
I've got Wisbar Advance Desktop
I installed Mortscript
I copy the cab for the theme to my device and installed it
When to the Wisbar config, and selected the theme (not much seemed to happen)
The background of the default home screen changed to black for a second, and then went back to the default
I tried a soft reset, but still no theme....what am I doing wrong?
Click to expand...
Click to collapse
Seems right to me. You sure you are running Wisbar Advance Desktop 2?
problem showing sms
Nice theme! I have a problem. Sms messages will not show in sms tab... any clue?
hi. great theme. works perfect...nearly. i also got the prob with the sms. no symbol for new messages is on screen. old sms aren´t there, next...previous doesn´t work, too. but i do my best!
ps. i changed the regional settings du english (united states). don´t know if those settings have any influence on it.
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
m00moo said:
Seems right to me. You sure you are running Wisbar Advance Desktop 2?
Click to expand...
Click to collapse
WisBar Advance Desktop, v 2.1.5.1
I unticked touchflo from the today settings...would that make any difference?
m00moo said:
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
Click to expand...
Click to collapse
Yes, it's installed and the folders are there.
No errors shown. Nothing happens when in that tab.. everything else works great.
m00moo said:
Using a Reg editor please check if you have this Regkey installed (The cab should've installed but just in case)
HKLM\Software\ThrottleLauncher\Messaging
Also please make sure you have MortScript installed.
Could you please tell me if any errors are shown when you try to view messages?
Click to expand...
Click to collapse
hi. thanks for the reply. mortscript is installed. the reg keys are there. in "ThrottleLauncher" is the key "MessagingCom" in "Messaging" is another folder called "SMS".
ok my problem is when i tab the message icon i ressive a message box and have a error message the sortcut is invalid.
so i can see my sms
@m00moo - Might wanna inform everyone they need Message2reg for the SMS to work.
Secondly for those that have a blank theme... Click and HOLD then choose Wallpaper and pick one. The likely hood is you have the default black wallpaper and it makes this theme look almost blank with it.

Screen Alignment ?

My Leo just cant get my tap right... it's liitle bit to the left ?
Where I can find the screen alignment menu ? seems to be deleted in HD2..
PLS HELP !!
All settings ---> System ----> screen
xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
or more like Start Menu> settings> Menu> All settings.
Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Thanks..,,,, I was looking for Icon ....
Is there anyway to reset it back to default settings?
Rossimac said:
Is there anyway to reset it back to default settings?
Click to expand...
Click to collapse
If anyone got a solution for this, please let it know!
I think there is no "default setting". First time when flash it will prompt to set screen alignment.
Is there no screen alignement at the first startup of the HD2
xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.
I tried looking under the windows folder for a "screen alignment" or "alignment" application. No luck!!
Anybody else having this issue or is it just me.....
Arite....no luck...
I am returning my phone....
Sticking with TP2 till my service renewal....
DesperateScorpion151 said:
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.
Click to expand...
Click to collapse
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.
johncmolyneux said:
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.
Click to expand...
Click to collapse
TMo USA HD2's don't have that item! I agree with other poster that we have been left out of that feature!
Can anyone tell me what file the icon points to so I can see if maybe Tmo USA just didn't give us an icon on the system screen?
Thanks,
Gordo
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
And that damn fine thread comes to the rescue yet again! We need a superman logo smilie for when anyone mentions that thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hah, nice.
edit - just tried to see thru the neighbours bedroom curtains, seems x-ray vision doesn't come as standard.
samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
Fantastic! Thanks, it worked!
Gordo
Ahh, thank goodness. My screen alignment was driving me crazy, and of course, having a weird Tmous phone, the setting was nowhere where one would expect it to live in WinMo. You just made my phone 100% more lovable.
I have a problem with my screen alignment although I'm not sure it's the same problem as above.
Since updating my phone to the latest official ROM yesterday my home screen has shifted up by about 3mm.
My network indication is now partially hidden by the Start and notification bar at the top and a small strip of the basic WinMo wallpaper is visible below the Home/People/Messages/etc bar at the bottom.
Any suggestions?
The screen option in settings is hidden on the T-Mobile HTC HD2. You can make it visible in the registry
HKEY_LOCAL_MACHINE\ControlPanel\Pen
Set the value of "Hide" to 0 (currently it is 1). Then the screen option will be visible in the system folder under all settings.
hopes it helps

Categories

Resources