Database Users

MDA Vairo - Backlight Issue

Hi,
When I power the screen down via pressing the power button briefly ( Standby mode ) I have some issues when I turn it back on - IE the backlights off and I have to manually go in and turn it back up again - is this me or a bug ?
Also the GPRS monerting software they give you is very good I think - any one know of a simular one for calls....
( For those that dont have one - it loges when you use GPRS and based on figures it gives you etc tells you when you have used your free quoter / gives reports and a few other things from your today screen ).
TIA
Terran

I had the same problem. After a hard-reset and NOT installing GPRSmonitor it never happened again...

Found who makes this app and sent this.... ( No doubt it will be speak to T Mobile ) but any one else with this prob may also want to mail them....
Hi,
Got your app ( v1.0.0.1 UK ) bundled with my Tmobile Vario - I think it has a
bug. Every so offten when the the phone has its screen off or its in stand by
mode that when the phone comes back on the back light does not - and in fact
you have to go set it back to the right level to see any thing.
Also is it possible to have an option to stop the GPRS connection until such
time as the user wants it. I find that even though its disconnected when I have
finished a wifi session it the trys to dial out via GPRS... and I'm not the only
one if you look at xda-developers forum.
I found a work around which was to change the T Mobile Internet connection to
use com1 and dial '1' instead.... ( That would be a nice to have ).
In the mean time if you have any suggestions re the back light please let me
know.
Many thanks
PS - Any future plans to include simular functions for voice and may be an on of
button for the phone on the today screen ?
Click to expand...
Click to collapse
There support address is [email protected] with their web site being http://www.spbsoftwarehouse.com/?en
On Sale here http://www.pocketgear.com/software_detail.asp?id=5351
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Terran

Got an email from the developers... they say they know about this issue and the next version fixes it - what I dont know and I am trying to get an answer from Tmobile and the developers is how we get that update.....
Terran

ccsnet said:
Got an email from the developers... they say they know about this issue and the next version fixes it - what I dont know and I am trying to get an answer from Tmobile and the developers is how we get that update.....
Terran
Click to expand...
Click to collapse
Update for all you Vario users out there...
How do I get the updated copy ? I have no contacts within Tmobile to refer
>to....
Dear Terran,
yes, it will be a minor upgrade, so you will be able install it over your existing version.
Feel free to contact us if you have any additional questions. You can always refer to this ticket using this link: http://support.softspb.com/
Best regards,
Alexander Shalin
Spb Technical Support
http://www.spbsoftwarehouse.com
We will appreciate your feedback about working with our support system.
If you are not satisfied with quality of our support please let us know:
http://www.spbsoftwarehouse.com/support/escalation.html
We constantly work on improving our support and your feedback is very helpful for us.
[email protected]
Click to expand...
Click to collapse
Terran

Same problem here, no GPRS traffic program
installed, same issue remains... think it's a bug,
a nasty one, have to say that.
Axel

[new release] VJBlueSync - enable and sync through BlueTooth

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VJBlueSync - WM2003 only
This program can be used to automatically enable BlueTooth, load ActiveSync and start a synchronization through BlueTooth, all in one step.
It can also be used to start an Infra Red Sync, close ActiveSync and disable BlueTooth
As ever, it requires use of command lines to configure options.
The cab will install shortcuts, but these will only be in the right place if you have an English language OS
This software is beta: the BlueTooth sync does not always work. However, if it doesn't, try it again. If it still does not, enable BlueTooth manually before syncing.
I didn't really want to release this software, since the BlueTooth option doesn't work 100% of the time. But I'd done all the work, so even if it works 1%, you might as well have it anyway.... It's difficult to debug this since you can't be connected to ActiveSync while testing it :roll:
Download from my website.
V

hey vijay555,
that is the programm i'm looking for a whole week!!
thanks a lot for your work.
one thing:
your programm does't start the sync. it starts bluetooth and activ sync, but not the sync itselfs.(tried a lot of times incl restarts)
do you have an idea?
i start vjbluesync by the shortcut ( VJVlueSync Bluetooth) the programm created in startmenu.
ActivSync writes an error "synchronize with windows PC Errors: #now the time#". if i know click on tools->connect via bt every thing works fine.
thanks for your time
daniel

xlephant: I noticed the same thing, which is what I said on the page. try enabling the bluetooth first, manually, try bluetooth sync once manually, and then try VJBlueSync. I think the issue is timing, because the code used is exactly the same as for IRSync, and that works every time.
But I've run out of time to develop this one right now, I would rather not release it, but if I get a chance, I'll look at it again when I get a bit more time, and fix it properly. But i can't identify why it works sometimes, and not others... I got bored of it and just went back to developing VJOkButt instead. That was hard hard work!
If you can find a pattern that works on USB sync, I'll implement it. It does work, but not every time. Don't know why
Please indicate which hardware and OS you're using. Thanks!
v

Hi VJ/ xlephant,
I've been trying to do the same thing on WM5 (shame VJ's is WM2003 only) and came up with a not so short to set up porcess that works flawlessly so far for me. Have a look at the thread and you may be able to learn from what the other freeware is doing (if nothing else a few pointers).
The key for me is I use Wisbar Advanced, Pocket Bluetooth Tools and ToggleBTH (if you don't use WA as it isn't freeware though the other are the average user could use mortscript instead etc, but VJ you're good enough to code soemthing instead). Anyway, take a look at...
http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/catid,7/id,17404/#17404
Regards - Mallow1

WLAN Walkie Talkie

Hi,
Does anyone know if theres program that lets me talk to someone else (in my house using the same wireless network) just by pushing a button (like a walkie talkie).
I want something a bit like the voice recording in windows live messenger - but in the form of a standalone program.
Any information will be greatly appreciated.
Thanks in advance, Uzzy

It would be amazing.....
But I think it couldn't work using Wifi...
It should work through Bluetooth....

yeah..like PTT

try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479

papamopps said:
try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479
Click to expand...
Click to collapse
Site Translation???

curious george said:
Site Translation???
Click to expand...
Click to collapse
hehe - i´m from germany..... lol

papamopps said:
hehe - i´m from germany..... lol
Click to expand...
Click to collapse
hehe-can you help.

You could use Microsoft Portrait.

Google Translation of the site
Olioaglio

Olioaglio said:
Google Translation of the site
Olioaglio
Click to expand...
Click to collapse
Olioaglio you are the man!!! Thanks!

papamopps said:
try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479
Click to expand...
Click to collapse
I tried this out but with no success.
I have 2 HTCP3300's (Artemis) and installed the prog on both. Then i switched wifi on and went into the program. I saw my other device for about 5 seconds - and then it disappeared. The same happened with Bluetooth.
After a while i decided to try and talk within those 5 seconds (after restarting the porgram) but there wasn't any audio from the other artemis - there was only a message that came up on the screen saying something like "Sound quality is high". This message only came up when i was trying to talk to it.
Does anyone know what's wrong? This program would be perfect if i could get it to work properly.
If anyone wants to test it i can send the cab to them.
Thanks in advance, Uzzy

Hey Uzzy
The sound quality setting must be the same on both sides of 4talk. Once the are the same you should be able to hear your transmissions. My only issue with this software is that the signal itself seam to be a bit unstable. Breaks up a lot. MS portrait works quite for me.

SJPhone works over a WIFI network, even adhoc mode! in full duplex (better than a walkie talkie)! Use version 2003SE v.1.60.303c (there is a beta for wm5, but it doesn't work). I've used it, without problems, on both wm6.1 and 6.5 on an HTC Wizard AND an HTC Kaiser. It also has a PC version so you can talk Phone to Phone, PC to PC, or Phone to PC! The answer button doesn't display properly, so you have to configure a hardware button through SJPhone OPTIONS to answer the phone. You also need AudioSwitch to redirect the audio to the internal speaker. And you can also use it as it was intended, a SIP VOIP phone! I've set this up on several old phones for my Grandkids to play with. They LOVE it!

You can use Loudtalks;
Free push-to-talk for PC and Windows Mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
download here:
Windows or here a CAB for your windows mobile.
Works very easy and can be use over WIFI as on data worldwide

Thank for sharing!!

TMC now possible without external hardware

Hi guys. I just read through the Blackstone-subforums to find some cool new apps and yes, I found something very Interesting.
I'm talking about this Thread: http://forum.xda-developers.com/showthread.php?t=511838
They made TMC-service without additional hardware possible for the Blackstone and I tested the service on my X1 and it works amazingly with MN7.
Big THX to our "brothers" in the neighbor-subforum!!!

Could you please indicate how you got this working?
Did you have to disable the Media Panel (X-Panel), or did you have an older firmware without this?
If you did have to disable it, how did you do that?
And, it was my understanding Navigon (MN7) only supports GPS with integrated TMC and this mix-driver isn't ready yet.
A step-by-step for the X1 would be really appreciated!
Thanks,
Rowdy

I'm interested in a step-by-step guide too! HyperGPS works fine but I can't activate it in MN7. If I do it manually by editing the XML Port 9: HyperGPS is activated but I can't press the "Traffic/Verkehr"button.

vrowdy said:
Could you please indicate how you got this working?
Did you have to disable the Media Panel (X-Panel), or did you have an older firmware without this?
If you did have to disable it, how did you do that?
And, it was my understanding Navigon (MN7) only supports GPS with integrated TMC and this mix-driver isn't ready yet.
A step-by-step for the X1 would be really appreciated!
Thanks,
Rowdy
Click to expand...
Click to collapse
the new media panel should be disabled, because it claims radio exclusivly. There is a reg key which prevents new media panel loading during boot.
with the old media panel, iGO works fine tmc messages.

How are the setting in the MN7 for the tmc?
COM9 with 4800 baud?
Kartsen

whooh, looks pretty amazing!!
But, after running, it doesn't matter wich com port i'm selecting, there all not working!
hoping for a new version..

but WHAT IS TMC ??

TMC means Traffic Message Channel.
It's something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pelroig said:
the new media panel should be disabled, because it claims radio exclusivly. There is a reg key which prevents new media panel loading during boot.
with the old media panel, iGO works fine tmc messages.
Click to expand...
Click to collapse
Yes, well, I have searched 'everywhere' but probably on the wrong terms, since I cannot find this registry key.
So, any pointers would be greatly appreciated.

I would also be interested in a solution for MN7, because it doesn't seem to support TMC via COM-port..
How did you get it to work de Wolfe?

Hi. Sorry that I left the thread without any further infos
I almost dispaird of this topic. TMC worked exactly one time and MN7 showed me a traffic jam. But after that any other start of MN7 just let the TMC-driver peg out... After hours of further testing I gave up and took comfort in seeing that the whole project is still just in alpha-status...
Since yesterday my beloved X1 is at the doctor and gets dressed its ugly crack

Bluetooth Gampad BGP 100

Has anyone tried this?
I got out of memory eror when trying to connect, this is obviously not a memeory issue - I also get this error on Fpsece 9.5.
Is this a well known WM6.5 issue or something?
Anyone got a fix

Hey,
i own the BGP100 aswell and i had some problems too. Check the driver ive attached, works very well for me (tested on a Diamond, doesnt work with shipped driver).
I got it from Pocketpc.ch (German language PPC forum). It by the user Black Panther.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Howto
1. click "search"
2. wait (on diamond it takes some time)
3. the dropdown should show the right thing when its done searching
4. click "connect"
5. click "red stream"
Tell me if it works. My HD2 will arrive on Saturday (express )

I got an 'unexpeected error' grrr

Cheapest place to get one from
Ive found this from china... http://www.sourcinggate.com/bgp100-bluetooth-game-pad-for-pda-computer-p-3465.html
If this does work successfully Im onnit and ordering one asap

That is what I have and is the only one of its type available - I'd hold off until someone else can confirm it works.
I'm still having no luck!

Dont order just yet.
The gamepad does not work on the HD2 until someone figures out a way to make the HD2 connect to the gamepad.
Thanks for the software Ben86, it is loading but you click "Search" it just crashes.

Ive just asked black panther on pocketpc.ch if its possible for him to wirte his program for the Hd2. If so ill post it here
btw ... does the HD2 actually fit the BGP100? my guess ... no xD

Has anyone tried the new version that was posted 11/22?
Link - This version does not crash my phone when I hit search, but do not have a gamepad. Can someone confirm the new version works?

ryotgz said:
Has anyone tried the new version that was posted 11/22?
Link - This version does not crash my phone when I hit search, but do not have a gamepad. Can someone confirm the new version works?
Click to expand...
Click to collapse
It doesn't work. It says it's for a different bluetooth stack.

Sadly it does not work.
It says it is not made for our bluetotth stack and then it gives a .NET error.

Still hoping there is a solution out there somewhere.
Just saw this custom bluetooth software BTExplorer that is compatible with all kinds of bluetooth devices and uses their custom bluetooth stack. Right now they state WinMo 6.5 as coming soon. It is works with the Gamepad in 6.1, there could be hope it would with 6.5. Anyone willing to try with 6.1?

Can can one find BTExplorer to download or buy?
I could not find it anywhere except on their website, and there is no download link.

I have tried looking for a trial, but unable to locate one. Might try using their contact page to see if they have a trial.