Hi,
When I power the screen down via pressing the power button briefly ( Standby mode ) I have some issues when I turn it back on - IE the backlights off and I have to manually go in and turn it back up again - is this me or a bug ?
Also the GPRS monerting software they give you is very good I think - any one know of a simular one for calls....
( For those that dont have one - it loges when you use GPRS and based on figures it gives you etc tells you when you have used your free quoter / gives reports and a few other things from your today screen ).
TIA
Terran
I had the same problem. After a hard-reset and NOT installing GPRSmonitor it never happened again...
Found who makes this app and sent this.... ( No doubt it will be speak to T Mobile ) but any one else with this prob may also want to mail them....
Hi,
Got your app ( v1.0.0.1 UK ) bundled with my Tmobile Vario - I think it has a
bug. Every so offten when the the phone has its screen off or its in stand by
mode that when the phone comes back on the back light does not - and in fact
you have to go set it back to the right level to see any thing.
Also is it possible to have an option to stop the GPRS connection until such
time as the user wants it. I find that even though its disconnected when I have
finished a wifi session it the trys to dial out via GPRS... and I'm not the only
one if you look at xda-developers forum.
I found a work around which was to change the T Mobile Internet connection to
use com1 and dial '1' instead.... ( That would be a nice to have ).
In the mean time if you have any suggestions re the back light please let me
know.
Many thanks
PS - Any future plans to include simular functions for voice and may be an on of
button for the phone on the today screen ?
Click to expand...
Click to collapse
There support address is [email protected] with their web site being http://www.spbsoftwarehouse.com/?en
On Sale here http://www.pocketgear.com/software_detail.asp?id=5351
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Terran
Got an email from the developers... they say they know about this issue and the next version fixes it - what I dont know and I am trying to get an answer from Tmobile and the developers is how we get that update.....
Terran
ccsnet said:
Got an email from the developers... they say they know about this issue and the next version fixes it - what I dont know and I am trying to get an answer from Tmobile and the developers is how we get that update.....
Terran
Click to expand...
Click to collapse
Update for all you Vario users out there...
How do I get the updated copy ? I have no contacts within Tmobile to refer
>to....
Dear Terran,
yes, it will be a minor upgrade, so you will be able install it over your existing version.
Feel free to contact us if you have any additional questions. You can always refer to this ticket using this link: http://support.softspb.com/
Best regards,
Alexander Shalin
Spb Technical Support
http://www.spbsoftwarehouse.com
We will appreciate your feedback about working with our support system.
If you are not satisfied with quality of our support please let us know:
http://www.spbsoftwarehouse.com/support/escalation.html
We constantly work on improving our support and your feedback is very helpful for us.
[email protected]
Click to expand...
Click to collapse
Terran
Same problem here, no GPRS traffic program
installed, same issue remains... think it's a bug,
a nasty one, have to say that.
Axel
Related
Good and bad news from down under - OK, the good ones first:
The O2 XDA II arrived in down under as well And I would say it's the best thing since sliced bread - no, it's even better than that 8) Only problem so far is that It's sometimes a bit difficult to keep it in my sweaty hand while I sit - at 35 degrees in the shade on this lovely Christmas day - in the garden.
I have one problem though. I looked very envious on this O2 Active screen that tekguru refered to in his preview at http://www.tekguru.co.uk/phpBB2/viewtopic.php?t=468
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but my Australian version doesn't have that and it's not on the CD either Hm, is there any other way I could get this? Or is there any tool to place Internet shortcuts on my Today screen? Right now I use tdLaunch, but I didn't find a way to use it for URLs...
G'Day & Merry Christmas,
Don't know how you can get the O2 Active but here's a suggestion on accomplishing similar ability using TDLaunch. There are two ways actually :
Option 1
Create a button in TDLaunch and use the following details :
Name : Whatever you would like your link to appear as...
File Path : \Windows\iexplore.exe
Command Line : www.yourURLhere.com
Options 2 :
Create a favorites entry to your URL using Pocket Internet Explorer. Lets call it YourFavorite.
Create a button in TDLaunch and use the following details :
Name : Whatever you would like your link to appear as...
File Path : \Windows\Favorites\YourFavorite.url
Either one will give you what you want and open your default connection to Internet and load the URL. I found the first option to be somewhat more reliable. Don't know why.
Hope this helps. Regards.
Good on ya, mate! That does the trick...
Happe New Years as well
Hey guys it would be great if we had some screen shots to go along with this great TDLaunch tip! 8)
Farnold, glad to see it worked for you.
Qman, will post some screen shots later today.
Cheers,
K
easy....
i just clicked the O2 in the top left and it appears...
is this the same for everyone else..
cheers
maxd
Re: easy....
maxd said:
i just clicked the O2 in the top left and it appears...
is this the same for everyone else..
Click to expand...
Click to collapse
Nope, mate. There's nothing in the top left corner for me to click - besiders the START button...
The OZ version is not equipped with the O2 programs...
hi.. cani i get rid of the o2 stuff, like the active screens etc...
ive got skinning software but the o2 stuff always seems to be there, esp if i have to reset so would be good to get rid of it.
thanks for any help..
hi, does anyone know how to remove the o2 software from a xda2.
thanks in advance
It's all about using the SEARCH BUTTON first...............
... But as I'm in a good mood, read this: http://forum.xda-developers.com/viewtopic.php?p=107499#107499
Did it on my Alpine, worked a treat.
Hi,
I'm trying to get Skype to work on my XDA Trion over a WiFi connection, but when I try and start a connection, even to the test connection, the program quits. Apparently, this is because only "chat" is supported on the Hermes.
So the big question is.... Has anyone got it to work? Is there an older/newer version of Skype that might support voice comms (and maybe even the camera) on a Hermes?
I am currently using version 2.2 of Skype on WM5.
Thanks in advance.
This one's been beaten to death a bit. The latest version of skype doesn't support the tytn, but the older beta does work ok. I think there is a link to the beta in this thread http://forum.xda-developers.com/showthread.php?t=311938
Cavey.co.uk said:
Hi,
I'm trying to get Skype to work on my XDA Trion over a WiFi connection, but when I try and start a connection, even to the test connection, the program quits. Apparently, this is because only "chat" is supported on the Hermes.
So the big question is.... Has anyone got it to work? Is there an older/newer version of Skype that might support voice comms (and maybe even the camera) on a Hermes?
I am currently using version 2.2 of Skype on WM5.
Thanks in advance.
Click to expand...
Click to collapse
Ta. Some of the links in that thread no longer work, but I managed to google one eventually.
Cavey.co.uk said:
Ta. Some of the links in that thread no longer work, but I managed to google one eventually.
Click to expand...
Click to collapse
Well you started a pointless thread... redeem yourself and post the link to help others out then.
Ok....
/me goes hunting for link again....
This is where I got it from -
http://libertas.pbh.gov.br/~danilo.cesar/WM/?C=N;O=D
Here's a mirror on my server (may go down at odd times) -
http://www.cavey.co.uk/files/pocketpc/Skype 2.2 Beta/
The cab came from the activesync install directory.
Another link I found is...
http://www.towers.fr/SkypeForPocketPC_Beta.exe
Yes and I don't know why cavey.co.uk had to google because I just checked the thread referred to above http://forum.xda-developers.com/showthread.php?t=311938&page=2 and the links on posts 16,26,36 and 37 of that thread all work!
Mike
mikechannon said:
Yes and I don't know why cavey.co.uk had to google because I just checked the thread referred to above http://forum.xda-developers.com/showthread.php?t=311938&page=2 and the links on posts 16,26,36 and 37 of that thread all work!
Mike
Click to expand...
Click to collapse
I hit the first ones on the Skype site which didn't work then looked on oldversion.com (which doesn't cover the mobile one) and googled it.
Let's put it down to me being impatient....
Cavey.co.uk said:
Let's put it down to me being impatient....[/quote]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
At the end of this link/thread you will find tips (in English) for speeding up your 6900 and general maintains.
Sorry I did not explained/translate it all, but the main idea & tips are translated
http://www.pocket.co.il/community/showthread.php?t=149407&page=5
p.s. you will find in this thread more tips like how to use E-JAVA etc.
there is a say that one picture = 1000 words
you will see there lots of pictures
I will not be available in forums in the near future
so enjoy and use all tip as much as you can ,try them despite experts that will say otherwise on some issue
all been tested on the 6900 successfully with good improvements
I found the 6900 is a grate and not slow!! device if you tune it up to your needs
Enjoy
the above link was updated
I will try update it more soon
enjoy
great tip
Thanks for the link. I dont have 6965 at the moment but deciding to have one soon.
Now I'm checking if there any problem with the device.
xenon_art said:
Thanks for the link. I dont have 6965 at the moment but deciding to have one soon.
Now I'm checking if there any problem with the device.
Click to expand...
Click to collapse
if you can bay the 6915/10 [not us model] it has less problems but on specification they are the same ,do not know why but they just act diffrently on speed ,3pr software ,rigenal issues, any way enjoy
grate device
the above link was updated
I will try update it more soon
enjoy
English
The website is not in english...
EREZYAD said:
At the end of this link/thread you will find tips (in English) for speeding up your 6900 and general maintains.
Click to expand...
Click to collapse
ALSO TRY TO LOOK AT ALL PAGES OF THIS THREAD SOME WILL HAHE ENG TRANS AND SOME HAVE LOTS OF PICTURES TO GET YOU STARTED
ENJOY
P.S- LOOK AT THE END OF ANY POST TO SEE IF THERE IS ENG TRANS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
office 6.1
For U.K. users that had problems installing the office 6.1 update using MS installer (due to regional problems …) here is a CAB installation
Ignore any warnings (tap o.k.) and soft reset at the end of the installation
now your good to go
You can choose to install to card
Can be removed like any other software
http://rapidshare.com/files/76053596/Office-WM5.CAB.html
enjoy
Nice Old Bike
CBR1000RR said:
Nice Old Bike
Click to expand...
Click to collapse
yap
nice sofware that will let you fill like the 6900 is i-phone (free )
http://www.pointui.com/Home.aspx
one more (also supports hib) is pocket cm for contacts
http://rapidshare.com/files/80578896/Nadavi_and_Tene_Nadavi_Hebrew_Pocket_CM_0.17.cab
nice battery tray menu
HKLM/ SERVICES/POWER /SHOWICON
DWORD = 1
HKLM/SOFTWARE/OME/POWER
Dword showstandbypage=1
hw6915—DUN:
http://asukal.net/blog/?p=381
http://forum.xda-developers.com/showthread.php?t=322776
bt sound
http://mobilitytoday.com/forum/showthread.php?t=14646
good to know
voice dial
new live msn
install to device a lot better then old VER (also lite )
backup your device before any instalation/reg hack
some apps will replace the softkey function so you can restore with your backup or use sk-tools or restore using Registry Editor location:
"HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113"
"HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112"
enjoy
EREZYAD said:
yap
nice sofware that will let you fill like the 6900 is i-phone (free )
http://www.pointui.com/Home.aspx
Click to expand...
Click to collapse
works fast, nice
for the new users of the 6900
please read the tips from the link on my first post of this thread
the beginning is in hebrew but you will also find English translations
on my last post I have added new skin of destiator 7 (the new VER) and one more reg hack that will auto disconnect your GPRS
this hack is very useful if you want to update the weather or GPS … and not have the connection running after your "action" ended
if there is no data transfer the GPRS will shut itself at the end of the time frame you have set it to
there is no translation for the last post but the pictures will do the trick
don’t forget to go over all pages of the hebrew thread
enjoy
Hi,
Does anyone know if theres program that lets me talk to someone else (in my house using the same wireless network) just by pushing a button (like a walkie talkie).
I want something a bit like the voice recording in windows live messenger - but in the form of a standalone program.
Any information will be greatly appreciated.
Thanks in advance, Uzzy
It would be amazing.....
But I think it couldn't work using Wifi...
It should work through Bluetooth....
yeah..like PTT
try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479
papamopps said:
try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479
Click to expand...
Click to collapse
Site Translation???
curious george said:
Site Translation???
Click to expand...
Click to collapse
hehe - i´m from germany..... lol
papamopps said:
hehe - i´m from germany..... lol
Click to expand...
Click to collapse
hehe-can you help.
You could use Microsoft Portrait.
Google Translation of the site
Olioaglio
Olioaglio said:
Google Translation of the site
Olioaglio
Click to expand...
Click to collapse
Olioaglio you are the man!!! Thanks!
papamopps said:
try 4talk or somehow like this... i once found it
http://software-portal.faz.net/ie/54479
Click to expand...
Click to collapse
I tried this out but with no success.
I have 2 HTCP3300's (Artemis) and installed the prog on both. Then i switched wifi on and went into the program. I saw my other device for about 5 seconds - and then it disappeared. The same happened with Bluetooth.
After a while i decided to try and talk within those 5 seconds (after restarting the porgram) but there wasn't any audio from the other artemis - there was only a message that came up on the screen saying something like "Sound quality is high". This message only came up when i was trying to talk to it.
Does anyone know what's wrong? This program would be perfect if i could get it to work properly.
If anyone wants to test it i can send the cab to them.
Thanks in advance, Uzzy
Hey Uzzy
The sound quality setting must be the same on both sides of 4talk. Once the are the same you should be able to hear your transmissions. My only issue with this software is that the signal itself seam to be a bit unstable. Breaks up a lot. MS portrait works quite for me.
SJPhone works over a WIFI network, even adhoc mode! in full duplex (better than a walkie talkie)! Use version 2003SE v.1.60.303c (there is a beta for wm5, but it doesn't work). I've used it, without problems, on both wm6.1 and 6.5 on an HTC Wizard AND an HTC Kaiser. It also has a PC version so you can talk Phone to Phone, PC to PC, or Phone to PC! The answer button doesn't display properly, so you have to configure a hardware button through SJPhone OPTIONS to answer the phone. You also need AudioSwitch to redirect the audio to the internal speaker. And you can also use it as it was intended, a SIP VOIP phone! I've set this up on several old phones for my Grandkids to play with. They LOVE it!
You can use Loudtalks;
Free push-to-talk for PC and Windows Mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
download here:
Windows or here a CAB for your windows mobile.
Works very easy and can be use over WIFI as on data worldwide
Thank for sharing!!
Has anyone tried this?
I got out of memory eror when trying to connect, this is obviously not a memeory issue - I also get this error on Fpsece 9.5.
Is this a well known WM6.5 issue or something?
Anyone got a fix
Hey,
i own the BGP100 aswell and i had some problems too. Check the driver ive attached, works very well for me (tested on a Diamond, doesnt work with shipped driver).
I got it from Pocketpc.ch (German language PPC forum). It by the user Black Panther.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Howto
1. click "search"
2. wait (on diamond it takes some time)
3. the dropdown should show the right thing when its done searching
4. click "connect"
5. click "red stream"
Tell me if it works. My HD2 will arrive on Saturday (express )
I got an 'unexpeected error' grrr
Cheapest place to get one from
Ive found this from china... http://www.sourcinggate.com/bgp100-bluetooth-game-pad-for-pda-computer-p-3465.html
If this does work successfully Im onnit and ordering one asap
That is what I have and is the only one of its type available - I'd hold off until someone else can confirm it works.
I'm still having no luck!
Dont order just yet.
The gamepad does not work on the HD2 until someone figures out a way to make the HD2 connect to the gamepad.
Thanks for the software Ben86, it is loading but you click "Search" it just crashes.
Ive just asked black panther on pocketpc.ch if its possible for him to wirte his program for the Hd2. If so ill post it here
btw ... does the HD2 actually fit the BGP100? my guess ... no xD
Has anyone tried the new version that was posted 11/22?
Link - This version does not crash my phone when I hit search, but do not have a gamepad. Can someone confirm the new version works?
ryotgz said:
Has anyone tried the new version that was posted 11/22?
Link - This version does not crash my phone when I hit search, but do not have a gamepad. Can someone confirm the new version works?
Click to expand...
Click to collapse
It doesn't work. It says it's for a different bluetooth stack.
Sadly it does not work.
It says it is not made for our bluetotth stack and then it gives a .NET error.
Still hoping there is a solution out there somewhere.
Just saw this custom bluetooth software BTExplorer that is compatible with all kinds of bluetooth devices and uses their custom bluetooth stack. Right now they state WinMo 6.5 as coming soon. It is works with the Gamepad in 6.1, there could be hope it would with 6.5. Anyone willing to try with 6.1?
Can can one find BTExplorer to download or buy?
I could not find it anywhere except on their website, and there is no download link.
I have tried looking for a trial, but unable to locate one. Might try using their contact page to see if they have a trial.