Related
Whats needed:
TyphoonNBFTools: http://w1.whatcounter.com/dlcount.p...yphoonNBFTools_0.3_SPL1010064_SPVServices.zip
Any Official Rom (I used I-Mate SP3 WWE).
A Typhoon running Windows Mobile 5.0.
Reverting Back:
Run TyphoonNBFTools and Open the SPL1010064.nbf. Right click on SPL in the bottom part of the screen and choose Emergency Flash. If this is the first time you have used the program you will get a prompt on your phone to run the runtimes. Choose yes. Click OK to flash the new bootloader to your phone. Next disable Activesync by turning off USB connections. Turn off your phone. While holding down the Camera button insert the USB cable, the phone should run the bootloader and you will be presented with the tri-color screen. It should say USB in the bottom corner. Now run Mtty and choose USB connection. Hit enter in the blank white space. You should now see Cmd>. Type "info 2" without the quotes. You should see some information about your phone. Next type "format BINFS" agains without the quotes. This one is case sensitive. You should see format complete or something along those lines. Now close Mtty and re-enable USB connections. Run the exe from the update you downloaded and follow the instructions. Your phone should now boot back up to WM2003.
For those stuck in bootloader mode you will need to run mtty and reflash the wm5.bin to the phone then follow the steps above.
Leiden said:
Whats needed:
TyphoonNBFTools: http://w1.whatcounter.com/dlcount.p...yphoonNBFTools_0.3_SPL1010064_SPVServices.zip
Any Official Rom (I used I-Mate SP3 WWE).
A Typhoon running Windows Mobile 5.0.
Reverting Back:
Run TyphoonNBFTools and Open the SPL1010064.nbf. Right click on SPL in the bottom part of the screen and choose Emergency Flash. If this is the first time you have used the program you will get a prompt on your phone to run the runtimes. Choose yes. Click OK to flash the new bootloader to your phone. Next disable Activesync by turning off USB connections. Turn off your phone. While holding down the Camera button insert the USB cable, the phone should run the bootloader and you will be presented with the tri-color screen. It should say USB in the bottom corner. Now run Mtty and choose USB connection. Hit enter in the blank white space. You should now see Cmd>. Type "info 2" without the quotes. You should see some information about your phone. Next type "format BINFS" agains without the quotes. This one is case sensitive. You should see format complete or something along those lines. Now close Mtty and re-enable USB connections. Run the exe from the update you downloaded and follow the instructions. Your phone should now boot back up to WM2003.
For those stuck in bootloader mode you will need to run mtty and reflash the wm5.bin to the phone then follow the steps above.
Click to expand...
Click to collapse
Man! Can't thank you enough for this. I took my phone to the service centre, willing to pay for the repair, and they could not do it. Every thing works fine now. Very good manual, clear instructions and correct info!
THANKS!
Hi
I Am Trying To Follow The Procedure Mentioned. But When I Right Click On Spl I Am Not Getting 'emergency Flash' Active.
Can U Please Assist Me Regarding This
You need TyphoonNBFTools.dll installed on your phone. Try running TyphoonNBFTools and selecting Tools->Immediate Flash Tools->Test Immediate Flash. It should automatically install the required stuff for you. Check you phone when you run the program. You should get a prompt to installed a program from unknown publisher. Make sure to choose yes.
Stuck in bootloader
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
maybe u need to make a "goldcard"
my feeler (o2 xphoneII) lives again after flash with goldcard.
I can't find a way to create one for Typhoon, can you point me in the right direction?
I try flash Amadeus = Qtek 8100 with UpdateTool from Qtek 8310.
Update process stopped at 74% , and UpdateProgramm closed.
Now my Qtek 8100 not Powered ON , and can't enter in boot mode (tricolor screen) with "Camera" button hold + USB cable conneting.
PC don't see any USB devices when I connected my Qtek 8100 to USB port.
I think I erased Boot loader in my Qtek 8100 (but not sure).
Is any method for repair ?
WBR !
er1cc said:
I try flash Amadeus = Qtek 8100 with UpdateTool from Qtek 8310.
Update process stopped at 74% , and UpdateProgramm closed.
Now my Qtek 8100 not Powered ON , and can't enter in boot mode (tricolor screen) with "Camera" button hold + USB cable conneting.
PC don't see any USB devices when I connected my Qtek 8100 to USB port.
I think I erased Boot loader in my Qtek 8100 (but not sure).
Is any method for repair ?
WBR !
Click to expand...
Click to collapse
UR Phone is fried!
this happens to almost 1 out of 20 users.....that while downgrading/upgrading to another bootloader, ur phone becomes dead....
DomConway said:
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
Click to expand...
Click to collapse
get the tricolour bootloader type in mtty info 2 the type format BINFS then upgrade using rom upgrade
DomConway said:
Just trying to do this following my question here.
I though it was going well but I have a major problem now! I managed to do the emergency flash, but every time I boot I just get the tricolour bootloader screen (IPL 1.00, SPL 1.01.0064) and can't get any further. Any ideas please? I have tried using mtty to load wm5.bin but get the error "MTTYDownloadImageNot allow operation!"
I have also tried re-doing the "format BINFS" and doing the above again but still no joy.
Any ideas would be much appreciated!
Click to expand...
Click to collapse
i also got that problem but i reinstalled the patched RUU again and my phone now boot but i have not been able to go back to the 2003 as i insalled WM5 but still cant format the BINFS
If already have patcher the bootloader with the guide to upgrade to wm 6.0 can I ignore to do it again? I mean flash bootloader again ?
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..
Hey there, just want to say before I tell you my problems that this forum is cool. I recieved a lot of useful information and tools for my phone here. Thanks.
Onto the problems!
Okay so first of all, I was given an HTC Vogue on the Telus network from a buddy because my previous phone fell in the pool. I was having a blast with this phone, 'twas the best thing that ever happend to me.
Now before I get into specifics, I'd like to mention that I've never been able to connect to activesynce because the computer would not recognize the USB cable. I've never been able to fix that problem.
Recently I've been having problems with my phone. Sometimes it would take a little spill onto the floor from my lap because I'd forget it's there or whatever. The back casing would come off and the battery would come out. No worries, I would just pop it back in and off I go. But this time it would boot up to the Telus screen with the buncha red writing.
Code:
M 03
B 01
P DCAAXOM-4350H
R 3.41.00
D 3.07
After that text disappears, the phone would freeze at the Telus screen and either: a) No LEDs would flash b) a yellow LED would come on c) THe phone would be left on that screen and just shut off after a while.
So i did some research and found that I could preform a hard reset. Voila! It worked like a charm and I was off using my phone again, but it had barely been 24 hours before the phone froze and I had to reset. And the phone would revertback to the previous problem. Hard reset would NOT work. It would reset the phone but still freeze. Sometimes it wouldn't even stay on the hard reset, the phone would shut off as soon as I release the SEND button after holding all fo the hard reset buttons. So i went back here and on Google to look for the fix.
I've done a bit of research on possible fixes to my phone like disassembley of the phone and the placement of plastic sheet over a processor of some sort and flashing the ROM.
So what I did was look up some custom roms and what not. From what I understand you need a CID Unlocker before custom roms can be used. I looked around and found that I need the USB connector to work for the phone to become unlocked. But this conflicts with my current situation and whenever I try to flash with a custom rom from the microSD, it takes me to the Loading... screen and stays there without any mention of flashing a ROM. This is also the case when I try to put the CID Unlocking .nbh on my microSD card.
So I ask what I can do for my phone to revive it. I've done extensive searches on any fix to my phone with little or no result. I need some fixes fast because I have a tonne of important calls coming in that I need to answer. I will not accept that my phone is dead.
Please guide me in the direction on how to unlock the CID with a microSD card. Or just anything that'll enable me to use my phone again. I con't afford ot buy another one.
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11[/QUOTE]
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.
Also here is a link for the unlocker for the CDMA Touch on PPC Geeks
http://forum.ppcgeeks.com/showthread.php?t=20370
whitey10tc said:
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
Click to expand...
Click to collapse
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.[/QUOTE]
I've tried that. The phone reads USB but the computer can't recognize the phone. Activesync won't work either.
EDIT
I've tried flashing with a stock rom. Everything runs fine in that screen. I soft resetted the phone and it went to the windows mobile 6.1 screen with an orange LED and just sat there, I wanted to wait but impatience got the best of me and I soft resetted and now it gets stuck on the telus screen again. Sometimes the green LED flashes as if the phone was running normally and the screen dims. I don't know whats going on.
I think I've tried that ppcgeeks thing but I can't be sure. It doesn't work because I can't connect my hpone with the USB cable.
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
patience
patience is the key.
patience is the key.
If you go to bootload screen connect cable and it changes to USB you should be connected.
Also here is a link to a tutorial
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
To be sure that your computer is not connecting to the phone plug usb in go to deivce manager and double check the USB if it is not connected correctly it will have a warning sign by that port. Try reinstalling updating your drivers for the usb.
patience is the key.
patience is the key.
beanage said:
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
Click to expand...
Click to collapse
You need to flash the SPL 2.31 bootloader
It appears as if it's fixed for the most part. Some minor problems but that doesn't stop the fucntionality of the phone. But I'm still pretty pissed that no matter what i do, my phone will not be recognized by the computer with the USB cable. i've tried everything and looked everywhere. Does someone want to send me the usb drivers for the Vogue? Please don't tell me that i don't need drivers because activesync won't connect. I've seriously looked all ove rthe internet for fixes and none of them work. Any pointers ro anyone want to send me official HTC drivers? I want to start using cooked ROMS.
here you go HTC windows driver will work for the vogoue
http://www.4shared.com/file/94429326/ffb09a5f/WindowsHTCdrivers.html
But unfortunately won't solve active sync problem. I would uninstall activesync and reinstall on your windows XP computer.
Quote from HTC website
Q.
Activesync is not recognizing my device, what should I do?
Be sure that you have not connected your device to your PC before you installed Activesync. If you did plug in your device before installing, uninstall Activesync and start the process over ensuring that you do not plug your device in until after Activesync has been installed.
Verify that your device is recognized by your PC in the Device Manager; if it is not, resolve that issue first.
Unplug your device from the PC for a few seconds and then plug it back in.
Perform a Soft reset on the device while it is plugged into the PC.
On the device, go to Start>Settings>Connections>USB to PC and check the "Enable advanced network functionality.
crap, my phone just ****ed off again. Same deal as before. Hate being broke.
help with vogue frozen loading screen
i unlocked my vogue and flashed NFSFAN 6.5 ROM and now phone freezes at loading screen and will go no further. i can still pull up bootloader thats all. any help or tips would be appreciated. thank you
what is your bootloader version
htc boot up screen and bootloader
m03
b01
acaaam-4070
r 2.26.00
s 3nfs
vogu100
spl-0.41.coke
cpld-3
are you using a GPS ROM if so you have the wrong bootloader and need the 2.31 from this post http://forum.ppcgeeks.com/showthread.php?t=20370.. Install the 2.31 and give it a try.
tried using 2.31 unlocker, when i run the RUU and says it will take 10 min it accually takes 10 sec and installs fast then after my phone restarts bootloader still says .41
You need that SPL 2.31 for that ROM
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
This is a quote from the facts thread for your ROM
First go here http://forum.ppcgeeks.com/showthread.php?t=20370 and
READ the hell outta it until you have it step by step.
(BTW use the 2.31 unlocker regardless about the GPS thing)
OK, now that you've read that (happy dance time)
Download the 2.31 Unlocker and NFSFANs WinMO 6.5 ROM.
Here is a good link for the boot loader. unlocker.
ftp://up.ppcgeeks.com/Vogue/Users/ImCoKeMaN/Vogue_unlocker_MFG_2.31.exe
yeah still can't get 2.31 to load on my phone. i tried to flash the stock alltell and sprint roms but at 29% it freezes or has recovery issues and will not go past 29%. flashed dcd 0.2.0 and got it to load! bootloader still shows .41 but now when i boot up phone it says in red at bottom of HCT boot screen.
m 03
b01
No radio
d1.17
Who is the original carrier You will need to get that OEM ROM and flash it. Then run the 2.31 unlocker follow the directions you can use the bootloader on the factory rom I have done it with sprint and alltel Vogues. The OEM ROM will reinstall your radio then you canuse the unlocker. The .41 unlocker is for non GPS radio and ROM combinations.
HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.
i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.
Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l
I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted
i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!
I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.
have you tried loading a rom from the root of your memory card LEOimg.nbh?
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.
Hello together
wish you nice eavening!
My Problem is the following: The only thing, on my htc touch hd T8282 that seems to work, is the bootloader.
Til five minutes ago I could read there:
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
now the following is added:
in the right, top corner: RUUNBH
in the green field: Upgrade ROM code error, Please try again
I think, this is because, in my helplessness, I interrupted the flashing process. But that's not the main problem.
Beside that, I can "start" the phone only by plugging in the USB cable from Computer or charging station. Then the phone vibrates, and the "smart mobility" screen comes up. After about 5 seconds it starts again, doing the same.
I tried hard resets, but it doesn't work. The only reason why I'm still trying to repair the phone is, that the bootloader is working. To me a signal, that somhow not everything is lost, but maybe I'm wrong.
I tried to flash the phone too. I tried first with the official "BlackStone_GER_1.56.407.2_Radio_52.60.25.33_1.12. 25.16DE_Ship.exe" which worked in the bootloader mode. At least the screen "flashing was sucsessful" showed. The bootloader was the same and nothing changed.
After that I tried with "HSPLWrapper_Blackstone_156OliNex.exe", which is not working. It demands a connection with the ActiveSync, which I have on my Computer, but the only way the computer detectes the Phone is in the bootloader mode. In normal mode computer and active sync don't detect a phone.
So my questions to you:
Do you know a way to load the hard spl (from OliNex) to the phone, although I cannot connect it to ActiveSync? There should be one, because with the official data it "works" (or seems to).
Do you have any help?
Thankyou
Samuel ben jamin said:
Hello together
wish you nice eavening!
My Problem is the following: The only thing, on my htc touch hd T8282 that seems to work, is the bootloader.
Til five minutes ago I could read there:
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
now the following is added:
in the right, top corner: RUUNBH
in the green field: Upgrade ROM code error, Please try again
I think, this is because, in my helplessness, I interrupted the flashing process. But that's not the main problem.
Beside that, I can "start" the phone only by plugging in the USB cable from Computer or charging station. Then the phone vibrates, and the "smart mobility" screen comes up. After about 5 seconds it starts again, doing the same.
I tried hard resets, but it doesn't work. The only reason why I'm still trying to repair the phone is, that the bootloader is working. To me a signal, that somhow not everything is lost, but maybe I'm wrong.
I tried to flash the phone too. I tried first with the official "BlackStone_GER_1.56.407.2_Radio_52.60.25.33_1.12. 25.16DE_Ship.exe" which worked in the bootloader mode. At least the screen "flashing was sucsessful" showed. The bootloader was the same and nothing changed.
After that I tried with "HSPLWrapper_Blackstone_156OliNex.exe", which is not working. It demands a connection with the ActiveSync, which I have on my Computer, but the only way the computer detectes the Phone is in the bootloader mode. In normal mode computer and active sync don't detect a phone.
So my questions to you:
Do you know a way to load the hard spl (from OliNex) to the phone, although I cannot connect it to ActiveSync? There should be one, because with the official data it "works" (or seems to).
Do you have any help?
Thankyou
Click to expand...
Click to collapse
wel its saying spl so its original spl and not hspl
if you downloaded the german rom form the xda site it doesnt work as the spl in that rom isnt for youre device
if youre in bootloader try to flash hspl on it and then you can flash roms from the site
the other option is got to htc official site and look up the blackstone
there search the latest rom
if you want to download it you have to enter youre imei(can be found under the battery) with that code the rom youre going to download is only for oure device and is supposed to work for you
hope it helps
Thankyou for writing!
I downloaded and tested the rom from the htc site. I can run that and it comes up with the "successful screen". Then, the phone restarts, and I have the old problem, nothing changed.
As I mentioned before, I can not flash the hard spl from OliNex. That's my big problem. Because, also mentioned before, my phone is not recognized by the active-sync programm and in bootloader mode the HSPLWrapper from OliNex doesn't work.
hope there are some more replies and answers..
Samuel ben jamin said:
Thankyou for writing!
I downloaded and tested the rom from the htc site. I can run that and it comes up with the "successful screen". Then, the phone restarts, and I have the old problem, nothing changed.
As I mentioned before, I can not flash the hard spl from OliNex. That's my big problem. Because, also mentioned before, my phone is not recognized by the active-sync programm and in bootloader mode the HSPLWrapper from OliNex doesn't work.
hope there are some more replies and answers..
Click to expand...
Click to collapse
In activesync (or windows mobile device centre) go to connection settings and make sure that "allow usb connections" is ticked. Then retry connection device to computer. Put device into bootloader while connected. Does bottom of bootloader change from "serial" to "usb" after a couple of seconds?
In activesync "allow USB-connections" is ticked.
In the white, bottom part of the bootloader is written "USB" when connected to Computer. But if I connect it to the charging unit and start in bootloader, the white field is empty. I can't start it without any electricity source. Either there is another problem with the battery or, because you can't turn it off, the battery is flat all the time.
Also, the original htc blackstone rom-program, detects a connection to the phone, and is loading the rom properly, it seems. Because I could turn the bootloader screen back to where I already was once (by loading the official rom again):
BLAC 100 32M
SPL-1.54.0000
MicroP - BlackStone (LED) v6
Somehow it seems, that the power button is not working, I can't shut down when it is in bootloader, and can't really start the unit. But it's hard to say, 'cause it's starting automatically.
thanks