Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..
Hi,
Does anyone know how can I restore the original SPL from bootloader ? I try to do it, the progress bar goes to 100% but when I restart it, I still have the HardSPL installed.
Any ideas ?
Use SEARCH please
ygeordy said:
Hi,
Does anyone know how can I restore the original SPL from bootloader ? I try to do it, the progress bar goes to 100% but when I restart it, I still have the HardSPL installed.
Any ideas ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=381600
second post
Thanks for the reply.
I tried that. Unfortunatelly it doesn't work for me. The progress bar goes to 100% and after restart I still have OliNex loader. I don't have the step which says "Unplug cable".
Some other ideas maybe ?
ygeordy said:
Thanks for the reply.
I tried that. Unfortunatelly it doesn't work for me. The progress bar goes to 100% and after restart I still have OliNex loader. I don't have the step which says "Unplug cable".
Some other ideas maybe ?
Click to expand...
Click to collapse
That message appears on the device (on the colored bars screen). Maybe you thought it should appear in Windows.
It worked for me
SuperJMN said:
That message appears on the device (on the colored bars screen). Maybe you thought it should appear in Windows.
It worked for me
Click to expand...
Click to collapse
I know it's on the device. It did, when I did the hard spl. Now when I'm trying to get back to original spl (device stucked in windows boot screen) I don't have that message, but the process goes through. Unfortunately without any result.
ygeordy said:
I know it's on the device. It did, when I did the hard spl. Now when I'm trying to get back to original spl (device stucked in windows boot screen) I don't have that message, but the process goes through. Unfortunately without any result.
Click to expand...
Click to collapse
Stucked windows screen is a different problem. This method is ok only for working device.
In this case this is the only one idea:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
fktsndr said:
Stucked windows screen is a different problem. This method is ok only for working device.
In this case this is the only one idea:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Click to expand...
Click to collapse
yeah, tried this already also. after I hit task 8 and enter, the device resets, goes to Windows startup screen, get stucked again and just turns off.
Full description off my problem here for whoever wants to help me.
http://forum.xda-developers.com/showpost.php?p=2126848&postcount=31
I fully appreciate any kind of help.
Did you try flash back the original rom?
And I suggest rename this thread for example Stucked in windows screen...
Maybe more people will read it, and try to help you....
fktsndr said:
Did you try flash back the original rom?
And I suggest rename this thread for example Stucked in windows screen...
Maybe more people will read it, and try to help you....
Click to expand...
Click to collapse
I did try to put back a french ROM. I don't know if it was the original because unfortunately when I first flashed it I was kind of beginner in flashing HTC's, but I tried with the only original french ROM that I found on this forum. The process goes through, but yet the result is the same. Is there any kind of command to fully erase (format) the memory (beside the bootloader) and then try to load a ROM ?
Same for me with restoring SPL ...it doesn't work.
And my device is almost at the same state of damage as yours. See my thread...
http://forum.xda-developers.com/showthread.php?t=402765
Also the mtty and task8 just restarts my device. Nothing more, nothing less!
So there is no way of restoring SPL with entering the bootloader manually? Not even a mSD-Card Trick out there? I need to get it done because of warranty ;/
You stucked in Olipro hard-spl, this is why restore spl not works...
And unfortunatelly you can not flash spl with micros-sd.
But you can try to flash rom with micro-sd card.
http://forum.xda-developers.com/showthread.php?t=384084&highlight=guide
Or ask Olipro, maybe he can help you.
Well I am able to flash my Rom the usual way with USB connection.
But no way of restoring the SPL ;(
"So there is no way of restoring SPL with entering the bootloader manually? Not even a mSD-Card Trick out there? I need to get it done because of warranty ;/"
I do not understand exactly...
Did you try restore original spl with manual bootloader?
you run SSPL from Windows Mobile, then flash a stock SPL NBH, job done.
the whole *point* of Hard-SPL is that it can't be overwritten when it performs a flash so that if anything screws up you don't end up locked out of reflashing in the event something screws up.
Olipro said:
you run SSPL from Windows Mobile, then flash a stock SPL NBH, job done.
Click to expand...
Click to collapse
Sounds easy *hehe* BUT i can't access Windows Mobile anymore, that is my big problem. So my device will be picked up by O² in a few days, so i have to get the original SPL back without accessing Windows Mobile ;(
Any suggestion?
@fktsndr: no, thats why i have put a question mark behind it I just need a way of downgrading to the Original SPL without access to Windows Mobile. Maybe i should be sorry for my english
gmc said:
@fktsndr: no, thats why i have put a question mark behind it I just need a way of downgrading to the Original SPL without access to Windows Mobile. Maybe i should be sorry for my english
Click to expand...
Click to collapse
So...
You have hard-spl on your machine
You can not restore spl followed the guide in post 2 (WITHOUT manual bootloader)
You can not access your windows mobile (WM does not boot)
You freeze on startup screen
You can not start you phone with steps in post 6
Am I right?
If yes, you stucked in bootloader. And unfortunatelly I can not help you...Maybe Olipro.
fktsndr said:
So...
You have hard-spl on your machine
You can not restore spl followed the guide in post 2 (WITHOUT manual bootloader)
You can not access your windows mobile (WM does not boot)
You freeze on startup screen
You can not start you phone with steps in post 6
Am I right?
If yes, you stucked in bootloader. And unfortunatelly I can not help you...Maybe Olipro.
Click to expand...
Click to collapse
Well seems like something like this.
See I have no error because of invalid flashing. I had slight water damage. But some days later my device was working again for a whole day.
Next day it didn't work anymore.
When i startup my device and the WM-Splash shows up it makes "bring" and device turns off.
When i plug in the AC charger i can't even get beyond the O2-Splash.
But I can enter the bootloader and flash what I want, it works ;/
I am also able to connect with MTTY, maybe there is a way with repairing it through MTTY?
Full description of my problems here: http://forum.xda-developers.com/showthread.php?t=402765
But if i cant get rid of the problems i have to send it to warranty by tomorrow or monday and i think they will notice that i don't have the original SPL on it. So they will screw me ;(((
So, as I am not a noob to computers I would try ANYTHING to get it back on my own!
Is there also no way of restoring it by using the microSD-Card? So is there no way without Windows Mobile? Not even the holy MTTY? Or any way of debugging it by MTTY to see whats going wrong?
I'm screwed!
P.s. I have also tried another battery in the o² shop....didn't fix it ;(
gmc said:
Well seems like something like this.
See I have no error because of invalid flashing. I had slight water damage. But some days later my device was working again for a whole day.
Next day it didn't work anymore.
When i startup my device and the WM-Splash shows up it makes "bring" and device turns off.
When i plug in the AC charger i can't even get beyond the O2-Splash.
But I can enter the bootloader and flash what I want, it works ;/
I am also able to connect with MTTY, maybe there is a way with repairing it through MTTY?
Full description of my problems here: http://forum.xda-developers.com/showthread.php?t=402765
But if i cant get rid of the problems i have to send it in by tomorrow or monday and i think they will notice that i don't have the original SPL on it. So they will screw me ;(((
Is there also now way of restoring it by using the microSD-Card? So is there no way without Windows Mobile? Not even the holy MTTY? Then i'm really f***ed.
P.s. I have also tried another battery in the o² shop....didn't fix it ;(
Click to expand...
Click to collapse
There is an mtty method on post 6...maybe helps start your phone...
You need working windows mobile to restore-spl.
fktsndr said:
There is an mtty method on post 6...maybe helps start your phone...
You need working windows mobile to restore-spl.
Click to expand...
Click to collapse
Yes but on "task 8" my device doesn't behave as it should be. It just restarts doing nothing.
Seems like i just have to hope the guys at the service center will not recognize my "not original" SPL. 1% chance ;(
Well thanks for now fktsndr.
Seems like there is really no way of restoring it without Windows Mobile ;(
I thought there would maybe be a "Low Level"-Method of accessing the device and restoring SPL.
Can't think of that there is no way of formatting the device on its lowest level (mtty) or transferring the original SPL per MTTY. Hmm...there should always be a way
Olipro, no way? ;(
if I remember right, the polaris hardSPL is based on an MFG bootloader.
this means you can use mtty commands (mw) to unpatch the write protection then flash the stock SPL.
if I don't remember right, and it is not MFG, then you can still use another mtty command with a special file, but this is more complicated and was not fully tested. you can contact me in PM and we can see.
(you could transfer SPL via mtty, but that is also blocked in hardspl because the mtty transfer uses same code to flash the SPL in this SPL common base)
by the way task 8 is exactly designed to just do a soft reset. nothing wrong with that command.
they really meant task 28. this does a hard reset. you can try that. I guess you already did, but just in case!
edit: I just remembered another way if task 28 doesn't help. ifyou don't mind that the device will stop booting SPL, then you can just do task 2a command in mtty. this will erase SPL, and because of hardSPL overwrite protection it will fail to flash it back from the temporary RAM backup.
the result is that the device will not even boot SPL, it will be black screen. it will boot to the radio bootloader only and O2 won't know what SPL was on it before erase.
First of All, I am Noob for all this flash phone stuff~~
I was using A-Unlocker last night on my Athena, however the phone got f**ked up
I was able to finish the Step 1 "Flash SPL". After I done with Step 1, here is I got from bootloader 3 Color Screen
ATHE 100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
and it unlocked Step 2 "Unlock Radio"
after the Step 2 there was a Notice popped up "Your Device must now be unlocked with a program, please configure your device and then connect and sync with Activesync. after doing so, click OK and watch your device screen"
and My phone stop at HTC loading screen, not able to boot to "Window Mobile" system. I did reset phone many times but didn't work.
Please Help Me Out here~~ Tyvm
p.s: I can still boot the phone to bootloader 3 Color Screen
please help me
Your device is okay. You can already proceed to flashing any ROM that is desgined for SPL 1.2. If you want just a good looking ROM, you might want to try PK3.0 ROM. If you want WM6.1, try irus ROM.
If I'm you, I'll skip any rom that uses SPL3.5 for the time being until you're sure there is a mean to come back to SPL 1.2. This mean you should skip AP4.0 for the time being.
To flash one of the SPL1.2 based ROM, remove your storage cards and SIM cards, and ensure your battery is close to full. Then get into Bootloader mode (by pressing down the Camera and poke into the reset hole - hold it down for a good few seconds until you see the tr-colored screen). Then connect your cable until you see USB on the device screen. Then on your PC, start the RomUpdateUtility program and follow the instruction on the PC.
Good luck.
Thx, man! U Rock!!
Just flash the phone with PK3.0 Rom~
Hello everyone!
I have one imate Jam that's showing USB v1.02 on lcd n it's doing nothing at all. Cant even connect it to pc or anything at all. tried to put it in boot mode but nothing happened.
Wat can be wrong? tell me procedure for fixing this!
Regards
Tom
Showing USB1.xx is the bootloader mode ! Maybe a damage switch ?
I would try to flash it .
Cotulla says : *Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Good luck
Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?
Thanks for sharing info..
Can u tell me what rom to flash my imate jam with? I m new here don't know much about imate flashing. can u give me the link for the rom here please??
Regards,
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Where to download rom from?? update.exe?? where to get that from?
wihandw said:
Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?
Click to expand...
Click to collapse
Fix it like here described, its in german but you will understand it.
The Magician must be in Bootloader mode for this procedur.
View attachment 298939
To be sure that your MAgician is o.k. flash a ROM from your Provider. Also you can get Cotullas WWE3.03 ROM from here http://cotulla.pp.ru/Magician3.html
Be sure that you have Radio 1.12 on your Magician ! ! ! !
cum instalez radio 1.12? cum imi dau seama ca este instalat. please help me
need help!!
my cingular8125 stucked in splash screen. however, it can still goes into bootloader mode.
when it is turned on, it only shows these informations:
ipl 2.26
spl 2.26
gsm 2.xx.x
os??? (no information)
some rom problem occurs i guess..
when i tried to flash it with other rom. i go to bootloader mode. connect usb but it doesn't connect in activesync. so i get an error when i start ruu.exe.
is it possible to flash rom on my wizard without using activesync?
or using sd card?
is there a dumped rom so i can flash rom using sd card?
any solutions??
need any dumped rom for my wizard..
SOLVED MY OWN PROBLEM:
for those having the same problem here's how i solved mine..
some things may not necessarily needed..
but these steps worked for me:
first thing first:
download a mtty.exe, if you got a zip extract it somewhere..
get a working wizard, or if your wizard can still backup your image you can..
since in my splash screen os onformation doesn't show up anymore.. sd rom backup on my wizard stucked in bootloader mode didn't work out for me.
so i get another working wizard running in cracing's wm6.5 you can get os images on any cooked rom you want..
1.) kill task manager first on your phone. if your'e using activesync 4.5 go to connections and untick the checkbox for "allow usb connections"
2.) go to bootloader mode (turn off the phone/remove battery then hold camera while powering on)
3.) connect usb you'll see little indication on your lower left part of your screen "usb"
4.) run mtty.exe
5.) choose //wceusbsh001
6.) then type "r2sd all" then enter
7.) you'll see a loading bar on your in your bootloader screen so you can see its progress..
8.)turn off the phone. enter bootlader mode. will ask you if you want to copy images on your sd.
9.) hold voice dial button(upper right-side corner of your phone ) and writing will begin
10.) when its done poweroff and on normally and your wizard is back to business..
cheers!!!