Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Sookesh said:
Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Click to expand...
Click to collapse
Did you upgrade you SPL to 1.56 first?
Read crackwhores guide in my signature
Sookesh said:
Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Click to expand...
Click to collapse
follow the instructions here --> cRaCKwHoRe's Blackstone Flashing Tutorial. simply stated, you have not (yet) followed all the steps to flash Dutty's ROM. retrace your steps and try again. good luck!
Thanks
Thanks man ....i didnt flash it at first....thank a bunch...
Related
My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!
Hi,
I tired flashing udk syrius r0.
during the flash i got an error messege about the communication.
now my device is stuck in bootloader mode :
"pola100
spl-1.25.0000
cpld-2"
i am using vista ultimate.
i tired re-flashing 3 other roms but i can't because the device is not being recognized.
i tried using mtty but i keep getting "usb port can not open" no matter what i do. i tired uninstalling the mobile center and nothing helps.
i tried flashing through the microsd and its not working as well (its in "loading" for over 30 minutes.)
1. is my device bricked?
2. what do i need to do to get my device back ?
thanks in advance
Jam
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
udK said:
That's happens because you don't read before, before flashing a non-Official ROM you need to install the Hard-SPL.
Click to expand...
Click to collapse
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
jamses said:
O.K. I'm a dumbass
how do I do that now?
or is my device bricked?
Click to expand...
Click to collapse
It is not bricked. You can repair it by yourself. Just use SEARCH function! Please do not ask questions that have been answered hundreds of times. It is really not polite to do that to people using these forums.
There are some sticked thread, take a look.
udK said:
There are some sticked thread, take a look.
Click to expand...
Click to collapse
Hi again,
i tried this threads...
http://forum.xda-developers.com/showthread.php?t=425922
http://forum.xda-developers.com/showthread.php?t=384084
http://forum.xda-developers.com/showthread.php?t=381600
nothing is working...
i am writing for help after i tried everything i can ...
please dont take this the wrong way but i need help recovering my device...
Just look the first sticky thread of polaris upgrading
JVRSilva said:
Just look the first sticky thread of polaris upgrading
Click to expand...
Click to collapse
i tried doing hard-spl flash but i can't see the "replug usb" message. the device immidietly moves to the progress bar and gets stuck with 0%.
can someone please help me...
try flashing an official rom
and after that flash hardspl
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
wouldn't flashing an official rom after a custom rom brick my device ?
ravest said:
try flashing an official rom
and after that flash hardspl
Click to expand...
Click to collapse
That solved the problem !!!
YOU ARE A KING !!!
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
imauser said:
I've installed the new ROM for the first time on my brand new LEO, everything seemed to go well..then after finishing it it rebooted..and the phone dean't start at all..all I see is a white screen with HTC on it..and that's it..nothing happens then..
I tryed to HARD reset..and it won't work neither..please someone help me..
Click to expand...
Click to collapse
You need to flash a radio like the 2.07 or the 2.08..........it is in the wiki,and manual in the sticky
http://forum.xda-developers.com/showthread.php?t=609477
thnaks for a fast responce..i seem to find a solution..I've pressed the volume donw while booting..an now i am reinstaling another ROM..hope its gonna work..
..cross my fingers..
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
imauser said:
THNX GOD and tinuz97 for a fast reaction it worked!!
if anyone have the same problem..I'll gladly help
Click to expand...
Click to collapse
no ta mate, id rather read the instructions first.
Hi all
I have a problem here, is not serious but really annoying my eyes every time I restart my phone keep showing “test only not for sale” have any1 know how to remove it
It start to happen when I flash my rom to the Telstra rom
Thanks in advance
flattit4 said:
Hi all
I have a problem here, is not serious but really annoying my eyes every time I restart my phone keep showing “test only not for sale” have any1 know how to remove it
It start to happen when I flash my rom to the Telstra rom
Thanks in advance
Click to expand...
Click to collapse
flash a new radio!
i'm currently using the 2115020 and flash back to 2105008 but no luck still show up
helo
flash a new rom
or simple a new startup logo
http://forum.xda-developers.com/showpost.php?p=5519927&postcount=57 leo stock
it's the splash screen. use the link that appelflap gave you
Thanks alot
Sultan1993 said:
it's the splash screen. use the link that appelflap gave you
Click to expand...
Click to collapse
I believe the answer to my question is no, but I just want to confirm. Can I install the splash screen that appelflap provided on my T-Mobile USA 1024HD2? It has been HSPL. Thanks!
hi, my screen is freezed everytime.. i Formatted many times, i've done task 29 and changed a few radio but still its cannot unlock the screen..
A few times it opened but it cannot when i want..
and i couldnt find good radio Flasher..
Can someone tell me about flashers.. I think i need one "***.cfg" file and "customruu.exe" isnt it ??
when i try to flash its says for version is "2.00.0.00" something like that. is that right ? or false?
Thanks...
Please HELP !....
There isnt any similar thread on forum... I changed Radio, too ..
Still not work..
is your screens unresponsive?
yes, it never response but it works without problem maybe once a day... or in a few days..
SlyRder83 said:
is your screens unresponsive?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=993787
Your answers are there.
im following that thread..
I hope it works..
But i have to find better solution then change buttons or touch digitizer..
AngelDeath said:
http://forum.xda-developers.com/showthread.php?t=993787
Your answers are there.
Click to expand...
Click to collapse
Try to return Official Rom. It may be work.
i had the same problem with my old HD2 it completly became completely unresponsive so i got a new one. try not to ever press the red button!! lol