Would anyone know if its possible and if so any ideas or tips on how to get a windows mobile device to play its sounds via activesync on the PC.
So if you have SatNav running and connected to a PC all the directions would be read out through the PC speakers rather than the device speaker. That kinda thing.
Thanks in advance.
Hi
There must be some application that do work.
but here is what i was done.
you need ( usb or anyother kind of ) bluetooth on your pc.
install bluesoleil and activate Headset service.
then connect to your pc bluetooth with PDA.
It detect your pc's bluetooth as a bluetooth headset and all sounds can be heard from PC.
Related
Can someone tell me how to get bluetooth tools working while I can still connect to my pc via bluetooth activesync? as it seems to disable ......maybe theres a easy way, but i dunno...thxs
Thanks to the last chap who told me to use activesync to view web pages using bluetooth.. the problem is "How" to get it to do that.. I have a little bluetooth dongle on the pc but they don't seem to talk to each other even though they are bonded.. and precisely how do i view an internet page using bluetooth
Do you tyhink it may be a bluetooth compatiblilty issue.. I've heard that maybe a different dongle and driver may do the trick?
The Idiot's guide would be much appreciated!!!
Gumby
Hi,
I downloaded the Bluetooth application ("fix") from here:
http://bluetooth.i-networx.de/index_e.html
Then Bluetooth works perfectly with my 3com PCMCIA card in the laptop.
I now only do ActiveSync via Bluetooth with one exception - when I want to send music via Windows Media to the Imate I have to use the cradle or cable because the bluetooth appears to the laptop as a serial link and the Windows Media does not support serial devices.
I can also use internet on the Imate via ActiveSync and bluetooth - although generally I stick to the laptop for that !
Regards, Dave
Thanks but unfortunately the fix doesn't bring up a web page anymore.. what is it that your suggested fix is fixing? AArrghhh! Can someone please come to the house and sort it out!!!!!!!!!!!
Thanks but unfortunately the fix doesn't bring up a web page anymore.. what is it that your suggested fix is fixing? AArrghhh! Can someone please come to the house and sort it out!!!!!!!!!!!
Hi again,
This bluetooth fix allows a simple connection from PC to Imate via ActiveSync and Bluetooth. It does not address internet issues.
Have you tried connecting the Imate/XDA2 to a PC with cable or cradle and then used Internet ?
It could be that your problem is not with Bluetooth - have you tried the Connection settings ? or, have you check the ActiveSync settings on the Imate.
Rgds, Dave
I probably understood your problem. You can't connect your Xda via ActiveSync via bluetooth.
First..assure the 2 Bluetooth devices are on discoverable mode.
Then go into your Pocket Pc START-Settings-System-Blueooth settings-tap to Bluetooth ActyveSync setup[start]
Select Discoverable mode and Tap in Bonded devices and NEW..
So..wait and Select your pc.
Then you will pair your pc with Pda.
Inserted the same code on 2 devices you probably can connect to ActiveSync via bluetooth.
Simply go in your Pocket pc,START-ActiveSync-Tools-Connect via bluetooth.
If this not help,try to set the right port on your PC ActiveSync-File-Connection Settings-COM1-2...etc..
Contact me if problems seems unsolved
[email protected]
Regards,
Ser
I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question
I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync
Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks
Hi, I am looking for some application or some setting for listening my music from TP2 on PC speakers using USB connection. Is there any way how to do that?
THX for your ideas
maybe if you connect your phone as USB Drive, not activesync and your will access with yout music-player read the usb-phone files to listen on Pc speakers
Thank for your answer. But I dont mean to play it in Windows media player.. I need to play music in my htc and listen it in pc speakers but i also need to hear pc sounds. any idea?
Bluetooth sound receiver
Try this
http://pretaktovani.cz/text/belkin-bluetooth-stereo.php
I am using it with my notebook, in my car etc. You must buy cable jack 3,5 too and set your notebook as a "line in"
Hi guys
I have a small issue with my remote connectivity to my android, I hope you guys can help with, the scenario is simple and my target is to connect to my android remotely through my laptop while the android is connected to my PC in the other room through USB cable, so what I have done already is that am connecting the Android to the PC through a USB cable and the PC to the Laptop through the LAN, now am connecting Remote desktop from my laptop to the PC and on the PC I installed application that can connect to the android so I can totally see the skin of my android and control it, but the final thing I wish to do is to make a phone call, here I connect a Bluetooth to the PC and I connect the Bluetooth as free handset to the android it didn't totally work,
So guys as you see its interesting scenario and if we work together we can accomplish something really assume
Really appreciate your help, Thanks
There are some computers that can act as a bluetooth "headphone", I'm one of the lucky ones.
Hang on while I search for my bluetooth drivers...
Bluetooth Radio by Qualcomm Atheros
Driver for my Asus N56: http://dlcdnet.asus.com/pub/ASUS/nb/DriversForWin8/Bluetooth/Bluetooth_Atheros_Win8_64_Z800206.zip
It appears that most of the Atheros bluetooth cards support this feature.
Thanks AmeesingNoob
But the thing is that I already got a Bluetooth USB connected to my PC working as a Hands free, so from the PC itself I can do Voice call through the PC speaker and headset but my trouble is that I can’t do this through the Remote laptop that is connected to this PC
So it would be like this:
Mobile Phone Sound > A2DP > Computer 1 > Computer 2
Click to expand...
Click to collapse
Am I right?
Exactly,
the first connection is between the mobile and the Computer 1 which it is a USB connection, and the second one is between Computer 1 and Computer 2 which it is a LAN / WAN connection.
Ah. Sounds like something I could use too.
I did some searches on Google and browsed some forums; found this.
PulseAudio is a sound server, a background process accepting sound input from one or more sources (processes or capture devices) and redirecting it to one or more sinks (sound cards, remote network PulseAudio servers, or other processes). -- Wikipedia
Click to expand...
Click to collapse
Please note that this software only runs partially (command line, no gui) on Windows. It was written for Linux computers.
mhhhh
I will try to download it and test it , then I will post my result in here
hope it will do the job,
Good luck!