Related
There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...
Hello,
Suddenly, I have lost all sound on my qtek 2020.
The system volume slider is on the lowest position and when I put it back on top, it goes back down.
Also when I try to play a ringtone a message appears saying: "The ringtone is not working properly".
I cannot hear the ring for incoming calls, or any other system sounds.
Can anyone help on this issue?
Thanks a lot
is the radiobutton in the slider dialog set to off ?
is it set to vibrate ?
how are the settings in sounds and notifications
did you try a softreset ?
durius said:
Hello,
Suddenly, I have lost all sound on my qtek 2020.
The system volume slider is on the lowest position and when I put it back on top, it goes back down.
Also when I try to play a ringtone a message appears saying: "The ringtone is not working properly".
I cannot hear the ring for incoming calls, or any other system sounds.
Can anyone help on this issue?
Thanks a lot
Click to expand...
Click to collapse
I have the same problem... When i uninstall BluetoothGPS, the sounds are gone... i can move the volume slider to high, but when i open it another time, it is on minimum...
When i install BluetoothGPS, the sounds wokr fine, but than i cannot select a BT serial port in Pocket Bluetooth Tools ...
Maybe this will work for you... I will try it now >> KLIK...
Toto03 wrote:
I reinstalled the widcom stack and sound is ok.
Did anyone know, how to erase the widcom-stack correctly - without the soundbug?
Does the delete-routine delete something wrong or thomething in the registry?
I think a lot of people have this Problem, because many instlled this...
Thanks for help...
Click to expand...
Click to collapse
If you have the Widcom stack go to the WIDCOM BT-manager Audio gateway tab and Disable this before uninstalling. Sound should then remain actve. Had the same problem
Very easy and simple fix!!, i had the same problem about a month ago and it took 3 weeks for me to find the solution,
click on start, then ultra profiler and untick the silent box and tick the normal one, select bluetooth as you want it, but make sure all the others are blank, tap the select button and its fixed !!
It seems that ultra profiler gets confused and forces the volume down from time to time for some unknown reason without you ever using it
Mosser said:
Very easy and simple fix!!, i had the same problem about a month ago and it took 3 weeks for me to find the solution,
click on start, then ultra profiler and untick the silent box and tick the normal one, select bluetooth as you want it, but make sure all the others are blank, tap the select button and its fixed !!
It seems that ultra profiler gets confused and forces the volume down from time to time for some unknown reason without you ever using it
Click to expand...
Click to collapse
I have not installed Ultra Profiler...
I yesterday made a hard reset of my device and installed it from scratch... Now it's working... :wink:
It seems BluetoothGPS is the faulty one, since after uninstalling all sounds are gone...
I followed instructions in this post to remove it but BluetoothGPS still shows in Remove programs section.
i havent installed ultraprofiler either, and i didnt want it because of this problem, but i comes preinstalled with the XDA2,
Maybe it isnt preinstalled on the Qtec version ??, not sure as i havent got one
just install bluetoothgps.cab again and all will be ok, i dont know the reson and appreciate if some one give a real solution.
How can I somehow speed up my XDA? I miss so many phone calls, because it has to "boot up" when someone calls and by that time it's 3 rings in, so by the time I get it out of my pocket and am able to answer by pushing the "Answer" button several times, I'm lucky to get it. I had the XDA IIs, and it was fine. Yet this is just a joke.
Any apps out there available or advice?
Thanks
just curious.... I had a similar problem. I recently unassinged unique ring tones from contacts. and made sure to copy the ring I wanted to use into the main memory(i.e. not on sd card) and this seems to have fixed the issue for me. I have even reassigned the unique ring tones.
Mike
You can adjust the ringing time :-
1) Go to the Phone app
2) Go to the Menu and select Options
2) Go to the Services tab
3) Highlight "Call Forwarding" then click "Get Settings..."
4) Adjust the time in the "Forward after:" box to 30 seconds
I now get six audible rings with old_phone
simply upgrade to the latest radio stack, seems to have fixed alot of peoples universal with the same problem, including my own universal
mine always rings on the second ring and havent upgraded.
but i have changed the forward to 30 seconds by calling my operator and having it changed, 1 month later, I found the manual change capability.
i would be looking to configurations and settings on the individual devices and see what is actually running and going on, cause it aint the phone.
Test this File-perhaps it speed up your Telephone.
The Turbo-Modus on my Universal speed up the Telephone too !
http://forum.xda-developers.com/viewtopic.php?t=39099
Try the cab-File - scroll down a little bit.
Greetings,
Jay
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Ever since I purchased my HD2 (Telstra) in February, I have had a problem where the ring volume intermittently switches off and I cannot hear incoming calls. At some stage after with no attempted fix, another call comes through and the phone rings fine at the volume I have set. The problem doesn't seem to be attached to certain callers, it seems to do it at times no matter who calls.
The phone actually rings (albiet silently) when the problem occurs as I see the phone go to the incoming caller screen, but there is no ring volume. When I check the volume of the ring tone on the phone after the call it is still set to a bit under half way.
I have the original Telstra ROM installed. haven't tried the new one yet.
Has anyone else had this issue and found a solution? I don't want to go to all of the effort to reinstall everything just to find out that the problem still occurs.
Thanks.
Same here!
I have the US version but have had this issue with both the stock US rom as well as the offical update they just posted.
A soft reset fixes it, but its totally random and is a major pain in the ass.
Any tips? Please help!
i have the same exact problem with my leo.
does someone have a resolution for this?
Me too!
Glad to know it's not just my HD2 that has this issue. I run the UK stock ROM and have suffered with this since I first got the phone! Most of the time it's fine, just every now and again goes quiet and I miss a call... I have even had the ringtone start loud, and then fade out. Would love to know if there is a fix for this......
Hi boys,
i've a similar issue with my Acer S200 with Manila ROM (OS version 5.2.23123, Manila version 2.5.20153712.0).
In a randomic way, suddenly the ringtone volume goes zero. I have usually ringtone+vibration, and vibration disappear too, together with ringtone....!
So with a new call, i can see the "incoming call" sceen but no sound and no vibration alert me...
With a soft reset i can solve, but i cannot understand what is the condition that triggers this problem....
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
it is not problem go to sound settings and close quiet ring on pickup
feyisetan said:
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
Click to expand...
Click to collapse
go to settings , personal , phone, keypad ,and close it
hoss_n2 said:
it is not problem go to sound settings and close quiet ring on pickup
Click to expand...
Click to collapse
not active.
The problem sound like a bug, instead.
andremales said:
not active.
The problem sound like a bug, instead.
Click to expand...
Click to collapse
mine don't have this
Erm.. try this
Settings > Sound & Display > look for "Single Volume" and turn it OFF.
whenever I press the volume key it has the option to switch between System & Ring Volume Level.
Hope it helps!
nothing helped.. performed a hard reset, now the problem is gone
No ring volume
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
gutchin said:
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
Click to expand...
Click to collapse
Thanks, will try that. hope it helps
i will, thanks!
.mp3 extention causes the problem.
try .wma format, it should solve the problem
best solition
What is the best solution for this problem?? Change the REG Key or. Change .mp3 to .wma???