I bought a full housing from ebay and asembled it all back together. But when i turned the phone on i noticed that when i slided the open to view the keyboard, that screen wouldnt rotate to landscape. Does anyone know where the switching the screen mechanism is located at? or any other posible way to fix this issue?
anyone out there that can help me?
anyone out there that can help me?
Hey buddy same thing happened to me,, we probably made the same mistake putting it back together,,i'm just too lazy to do it all over again,,i downloaded a cab called rotate screen.
Laterz
Pollirox79 said:
Hey buddy same thing happened to me,, we probably made the same mistake putting it back together,,i'm just too lazy to do it all over again,,i downloaded a cab called rotate screen.
Laterz
Click to expand...
Click to collapse
I am aware of that, but thanks anyways. Im kinda picky when it comes to my phone lol...So i would like to still find the mechanism that rotates. i have taken the phone apart atleast 20 times and i think cant figure it out ....Anyone else knows where the mechanism is at?
Dang i take my hat off! After like 2 hours of dissasembling mine and putting it back together ,that was it for me i'me never doing it again...lol still trying to save some money to get the htc touch hd. :d
look at your old housing... i believe that there is a magnet that triggers the landscape mode. i switched to an iphone and dont have my wing handy right now. hope this helps
kristopherson said:
look at your old housing... i believe that there is a magnet that triggers the landscape mode. i switched to an iphone and dont have my wing handy right now. hope this helps
Click to expand...
Click to collapse
Thank god i didnt throw it away...i was actually using it to hold my screws lol..Im gonna try and remove the magnet and put it into the new housing...Thankx
Glad to help.
kristopherson said:
Glad to help.
Click to expand...
Click to collapse
Problem solved thankx again
Related
I don't know why this setting can solve this problem (May be).
Go to
start > Setting > Connection > USB to PC
Step:
1. Uncheck USB to PC
2. Start > Setting > System > Screeen > Calibration the Alignment of Screen
3. Soft Reset.
My friend also use CHT9000 (Taiwan Version) and told me this method. After the above mentioned adjustment, not alignment problem up to this moment.
I also use this method. 2 days gone, no alignment problem was found. I will keep to update this post in the future.
Hope it can help. :roll:
anyone else tried this? anything to comment?
vapor said:
anyone else tried this? anything to comment?
Click to expand...
Click to collapse
There is a thread or two about this on the general side or somewhere.
"Search" will work fine.
I tought it is working but not.
I have contacted with the local HTC/QTEK partner.
Waiting for the official solution.
BR,
Joe
I think that I may have a proper fix. my alignment seemed to be fixed by a rom upgrade but has been getting prgressively worse for a few days. Last night I tried something hardware based. I will test this for two days before I will say what it is but I have had no misalignment issue in the few hours since I did it.
Phil
could you post what you did so even if it doesnt work, we would know?
vapor said:
could you post what you did so even if it doesnt work, we would know?
Click to expand...
Click to collapse
Ok it hasn't shifted at all today!
I was going to open it up to have a look at the rubber gasket that was mentioned in another post but chickened out!
Optional but probably a good idea; turn off and remove the battery.
1) Slide keyboard out and turn face down.
2) There are 2 tiny screws on the back of the screen that need to be undone. They have thread lock on them so a small crack will be heard as it releases.
3) Once the screws are out a further small crack noise may be heard. That'll be the tension being taken off the screen!
4) Put the screws back in and tighten (or should that be TyTN?). Do not over tighten these as it is only plastic.
5) If necessary realign the screen (hopefully for the last time)
As kind of proof that this has worked, this post was made from my v1605 on hsdpa while I was talking on the phone using bluetooth and got very hot and didn't need any realigning!
Hope it works for others!
Phil
I have the O2 Trion and my screen will be slight misaligned at the right side (cant use the vert scroll bar) . Is this exactly your problem ?
Does your problem happened again, if not could you post some pic/steps on how you did it ?
Thanks :roll:
4) Put the screws back in and tighten (or should that be TyTN?). Do not over tighten these as it is only plastic.
as long as there is no excessive used here, that is what you mean right?
sectorlord said:
I have the O2 Trion and my screen will be slight misaligned at the right side (cant use the vert scroll bar) . Is this exactly your problem ?
Does your problem happened again, if not could you post some pic/steps on how you did it ?
Thanks :roll:
Click to expand...
Click to collapse
That's what mine was doing when it got hot but it has been perfect all day!
vapor said:
4) Put the screws back in and tighten (or should that be TyTN?). Do not over tighten these as it is only plastic.
as long as there is no excessive used here, that is what you mean right?
Click to expand...
Click to collapse
You're correct. Before I did this one screw was clearly at an angle and afterwards it was straight.
If anyone else has success let me know and I'll try to get some photos and do a how-to on the wiki.
Phil
i tried this out for my friend and he claims that while it did fix the alignment problem on the right side, sometimes the screen becomes slightly misaligned. could be that i tightened a bit too hard so will look into this.
I'll try to get some photos and do a how-to on the wiki.
Click to expand...
Click to collapse
yes please
hi ...
when I undone the 2 screws.. i dont hear ANY noise... but I remove and returned it a little bit untight.
Let see... :roll:
Anybody had any success with this?
I haven't had any alignment issues since I did this 2 days ago.
Phil
low405 said:
Anybody had any success with this?
I haven't had any alignment issues since I did this 2 days ago.
Phil
Click to expand...
Click to collapse
When I did it for my friend, he claims that the screen, while does not have as serious an alignment problem as before, still has it. Its not that bad.
He notices that the problem usually comes after making a call. No matter how long the call (whether for 1 min or 40 mins), the screen will be slightly mis-aligned and needs to be re-aligned. Things like pressing the 'ENTER' button on the phone pad does not work unless he presses a certain part of the button.
Any advice for him?
low45,
I undone the 2 screws but hear no click or crack and return it back not so tight... is that the correct way... I will monitor mine, since it only happening once a day..
Though I do not hv one but I can inform that it is the bad quality of work..this has been happening to all the recent G4 Wizards and Prophets with SZ series serial number.
I think thehardware design has gone wrong..
Pls check yr serial number..if they start from HT or SZ
i think all the HTC Hermes manufactured are of the HT version
screw no help
ok... after a day.. it happened again...
I just hard reset and did not load the extROM last night... let see .. :roll:
me i go back to change it
i have HT630xxxx and no probleme
hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
bartosz77s said:
hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
Click to expand...
Click to collapse
Who did the work? You or somebody else.
Kirby
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
bartosz77s said:
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
Click to expand...
Click to collapse
I think that you are stuck with taking it apart again to see what you missed. Not sure where the magnets are located I have scanned thru the manual but haven't given it a real good reading yet.
Good Luck,
Kirby
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
bartosz77s said:
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
Click to expand...
Click to collapse
Whoa 3 times you are an expert at taking the thing apart at this point. I don't have any other ideas but with any luck somebody will give you an answer. Sorry i couldn't be more help.
Kirby
I just picked up another 8525 after returning the first one to checkout the Blackjack. I wanted to make sure I at least tried it before my 30 day return policy kicked in. I noticed on my second 8525 the keyboard does not lock into PDA mode as secure as my first one. It seems that the top part of the phone locks better then the bottom. So when I hold it has a phone I tend to slide the keyboard open a little. Has anyone had these issues? It just seems to easy on the second one to unlock/open the keyboard.
brmcguire said:
I just picked up another 8525 after returning the first one to checkout the Blackjack. I wanted to make sure I at least tried it before my 30 day return policy kicked in. I noticed on my second 8525 the keyboard does not lock into PDA mode as secure as my first one. It seems that the top part of the phone locks better then the bottom. So when I hold it has a phone I tend to slide the keyboard open a little. Has anyone had these issues? It just seems to easy on the second one to unlock/open the keyboard.
Click to expand...
Click to collapse
I'm afraid this is a fairly common problem. The metal runners/sliders have small indents at each end (cannot see these unless device is dismantled) that create the click into place when the sliding blocks attached to the base part slide over them.
These indents are often too shallow to create a nice firm click and in extreme cases the actual runner has sprung apart where small micro welds have broken.
There are fixes for this but only for those that don't care about their warranty and want to dis-assemble the device. I have done this fix and it now requires a very firm two thumbed push to open. However I do not recommend you do this when there is the possibility of exchange/return or repair.
Mike
If you decide to do it on your own I can vouch for Mike's method. He emailed me the process and I posted it on the WIKI.
barrydavisjr said:
If you decide to do it on your own I can vouch for Mike's method. He emailed me the process and I posted it on the WIKI.
Click to expand...
Click to collapse
Sounds like its possbile then. Where in the Wiki can I find the how-to? I looked and could not find it. Thanks again for the information.
It is under the hardware overview at the bottom. andMike i added some props to you for the method!
Mike, you must of really nailed this process. I guess I have to try it now.
barrydavisjr said:
It is under the hardware overview at the bottom. andMike i added some props to you for the method!
Click to expand...
Click to collapse
Cheers barrydavisjr.
Did it all work out well for you, I hope so.
Thanks
Mike
mikechannon said:
Cheers barrydavisjr.
Did it all work out well for you, I hope so.
Thanks
Mike
Click to expand...
Click to collapse
Yes Worked perfectly!!!
I have not done it yet, but plan to soon. To clarify what your fix does is that it tightens the sliding keyboard rails? or provide a better click when its closed?
Just read your site. I think that answered my question. Thanks, I will try and post my success (...or failure).
Great fix. One of the little but annoying things about the device fixed.
sliding keyboard then freezes
hello, I got my device ! I'm very happy but when I slide the keyboard, and here the left 'click' then it freezes.
It is very strange, is there anything I can do ?
Thanks in advance for any suggestion
dam said:
hello, I got my device ! I'm very happy but when I slide the keyboard, and here the left 'click' then it freezes.
It is very strange, is there anything I can do ?
Thanks in advance for any suggestion
Click to expand...
Click to collapse
I don't think the "clicking" mechanism is what's making your device freeze. I believe its the display going from portrait to landscape mode what's probably making it freeze up. Have you hard reset to make sure there is no 3rd party today plugins that are having issues with switching to landscape mode?
sliding keyboard, frozen device
dear brmcguire, thank you for your answer. I think I have to be more precise.
When I slide the keyboard and stop before the "click", it is ok, it moves to the landscape mode without problem. Then, when I push untill it locks, on the right lock it is ok but when pushed untill the left lock, then it freeezes. To be precise, "freeze" means that the menu bar opens, and the tactil screen does not answer anymore to the pen, (I can still use the buttons).
That is why I believe it is a hardware malfunction, but I'm still a newby
Does anybody had a similar problem ?
Any help appreciated
dam said:
dear brmcguire, thank you for your answer. I think I have to be more precise.
When I slide the keyboard and stop before the "click", it is ok, it moves to the landscape mode without problem. Then, when I push untill it locks, on the right lock it is ok but when pushed untill the left lock, then it freeezes. To be precise, "freeze" means that the menu bar opens, and the tactil screen does not answer anymore to the pen, (I can still use the buttons).
That is why I believe it is a hardware malfunction, but I'm still a newby
Does anybody had a similar problem ?
Any help appreciated
Click to expand...
Click to collapse
Ok, I see. It does sound like a hardware issue. I would try exchanging it for a new one.
dam said:
dear brmcguire, thank you for your answer. I think I have to be more precise.
When I slide the keyboard and stop before the "click", it is ok, it moves to the landscape mode without problem. Then, ...,,,,,,,,,,,,
Click to expand...
Click to collapse
I think we're all agreed it has to be hardware. There is no software that operates when the "left" edge clicks into place. There are two circuits that operate softwarewise when the keyboard opens
1. There is a small magnet operated switch that changes portrait to landscape and that's working fine,
2. The light sensor above the "p" key top right which operates the keyboard backlight.
I don't think either of these is responsible.
At a guess either the Multi connector Mylar Cable for the screen/digitizer connection is getting trapped/pulled/stretched and partially breaking its connection or the click into place is creating an internal squeeze against possibly the "windows" button hardkey next to the Green Phone Key.
I think like brmcguire that I'd get it back to shop while still in warranty perhaps after doing all the usual things like a hard reset - just in case we're all wrong and it is software.
Or you just never quite open it far enough to click into place. I do this a lot, partly because I've got a really firm click into place on both right and left sides that if I'm just quickly using keyboard I find I can get every key without the final clicks.
Mike
thanks
I tried hardware reset but no change. Anyway, thank you so much for your anwers. Not that it works better, but to feel support is quiet healing.
cheers !
mikechannon said:
I think you're right, maybe we need a Hermes counselling and psychological support group. All charges forwarded to HTC of course!
Mike
Click to expand...
Click to collapse
ok, I gave back my device, I will see what happen. Thanks !
RE. loose keyboard
CAN someone give me the direct link to the wiki page bc i couldnt find it i dont know why, if you know how to do it you can also send me the directions but PLZ someone send me a link thanks again
Did this fix after fighting with a very loose slider from the beginning. This and Mob6 software and I love my TyTn again.
Thanks for the instructions and thanks for the wiki.
derf
help needed
my digitizer appears to be on the way out, the touch screen alignment keeps shifting for no good reason, it used to do it only when i rotated the screen but now it even happens when i keep it in portrait only.
Also, right after i turn the uni on the touch screen won`t work for atleast a couple the seconds, no clicking noise and no indication i am touching it all.
The problem is getting worse with time.
Any thoughts/advice will be much appreciated.
same for me.
doesnt happen when i switch from portrait to landscape, but the alignment keeps getting messed up.
i'm thinking of opening the screen part, maybe i'll tighten the lcd and screws inside or something...
shlomki said:
same for me.
doesnt happen when i switch from portrait to landscape, but the alignment keeps getting messed up.
i'm thinking of opening the screen part, maybe i'll tighten the lcd and screws inside or something...
Click to expand...
Click to collapse
great..... do that now, and get back to me right away ....
davieshyland said:
great..... do that now, and get back to me right away ....
Click to expand...
Click to collapse
i did it just now. tightend screws, made the connectors sit properly, cleaned the edges of the screen a bit...
lets hope it will make a difference.
Bump. Any joy?
i gave in and ordered a new touch screen from ebay, £11 inc p&p, can`t argue with that.....
screen not arrived yet..... but the problems i was having seem to have gone away ?.
i`ve just flashed a different ROM, (although it was one i`d flashed before), and the problems i was having are gone, very weird.
this wasn`t the first time i`d re-flashed since the problem came up, and i`ve re-loaded all the same software i had when i was getting digitizer drift.
i will probably re-place the screen (when it comes ) anyway, but.....lets hear it for faults that fix them-selves.
pasan said:
Bump. Any joy?
Click to expand...
Click to collapse
Seems so!!
im on the 10th day without ANY problems! screen alignment is accurate and STAYS that way!
im happy so far. maybe you should try it also...
Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
I have also no idea what the reason is why its not working. It did not drop on the floor or something like that.
Thanks in advance,
Erlerain
erlerain said:
Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Welcome to the forum
I´ve never heard of this problem, but if I were you I try to reflas with another ROM to see if corrects (see the Wiki to learn how to), if not perhaps could be a hardware problem...
Good luck,
erlerain said:
Hello,
... In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
...
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Have you tried to re-align the screen?
wovens said:
Have you tried to re-align the screen?
Click to expand...
Click to collapse
Yes, but it is not getting the points that it should get. So you can try it a thousand times, and it would not make a diffreance.
Anyone? (sorry to bumb)
I have the same problem. Though I read on someplace that the screen is actualy getting pressed somewhere. try these steps and check after each try.
1st: Massage the screen softly all over.
2nd: Take a something very thin and move it under the edges of the screen.
3rd: (this on is the one that usualy works for me) try to tap softly on the back of the screen.(The aluminum plate) tap it all around the back of it.
4th: (this is the last way out when step 3 doesn't work for me.) Tap softly around the screen.
Gonna put up a video on youtube on how I do it. so you get to know how hard to tap and stuff. Since I guess we're not the only people with this problem.
Edit: Ehm. does anyone know a good free webcam recording program so I can make a video.
Ive already tried those steps. did not work
Then open the monitor part of the phone and press on the backside of the LCD.
Yep, thought the same. Ive tried to open the casing of the monitor part, but its pretty hard to get the plastic cover off
Ill try it soon again.
Thanks MiZore for ur active answering
No problem, but if you find a solution that lasts please write how here. Because I also have this problem. You have to use a little force to the the cover off. There is a dissassembly guide somewhere, I can find it for you if you haven't used it already.
i dont have that guide
Here's the guide
http://wiki.xda-developers.com/index.php?pagename=HTC Universal Service Manual
I've found another temporary solution. Take a good grip on each side of screenpart of the universal, then bend it softly back and then forth. This hasn't failed me once yet. But still no permanent solution.
gonna open mine and put something that will apply a constant pressure to the back of the screen like som cotton or something simmilar. I'll let you know the results.
Also, do you use a replacement battery or the original that came with the Uni?
Okay I opened it up today, and I think I've found the problem. Though not 100% sure. From my inspections one of the cables(small ones inside the silver tape) on the flexcable is not connected. and sadly I'm not that skilled with fixing it. So I'm gonna order a new one. I will tell you if it helps.
Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull
erlerain said:
Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull
Click to expand...
Click to collapse
Well I had to cut open the gray cover for the cables to see the damage.
But I'll see what happens when my new cable arrives.
I've installed the new cable and that fixed the touchscreen for me.
But now my sound won't work for some reason....