Related
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?
Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .
I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..
Did you try loosening the screws?
MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.
jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)
That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).
the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..
Had my Exec about a month now, no troubles with it (well dropped it once) it was working fine until last weekend, and now the sensitivity on the screen seems to switch itself off! i have to tap it repeatedly quite hard (with my fingers) for it to recognise that i want to tap the screen, then its fine, but as soon as i stop using it, it turns off again!
i've hard rebooted twice now and it solves the problem for a couple of minutes and then reverts to not recognising my screen taps..
anyone offer some help?
oh i guess i should supply some details about the firmware etc?
M$WM V 5.0
OS 5.1.195 (build 1487.2.0.0)
ROM V 1.30.124 WWE
ROM date 10/18/2006
Radio V 1.09.00
Protocl V 42.42.P8
ExtROM V 1.30.263 WWE
thanx
may be you can try a new ROM,
It seems that's a software problem.
i've looked @ O2's site and their ROM is far older than the one i currently have..
hmm one of the issues i've had with my exec is as if the screen is multiple selecting.
For example if i'm looking through my messages and one it already selected, I click on another message and that one gets selected too, dont know if this is an issue of similar nature to yours. After a hard reset it's fine so i'm not sure what causes it.
stualpha said:
hmm one of the issues i've had with my exec is as if the screen is multiple selecting.
For example if i'm looking through my messages and one it already selected, I click on another message and that one gets selected too, dont know if this is an issue of similar nature to yours. After a hard reset it's fine so i'm not sure what causes it.
Click to expand...
Click to collapse
Might be your screen protector???
I have had the "multiple selecting" issue in Total commander.
I cannot be 100% sure but mine seems to be solved by letting the screen rotate between portrait and landscape - but making sure the today screen and plugins are FULLY drawn before rotating again.
Matt
stualpha said:
hmm one of the issues i've had with my exec is as if the screen is multiple selecting.
For example if i'm looking through my messages and one it already selected, I click on another message and that one gets selected too, dont know if this is an issue of similar nature to yours. After a hard reset it's fine so i'm not sure what causes it.
Click to expand...
Click to collapse
yep i have the same problem with that at timez...gets annoyin as well as that it stops me from typing
cktlcmd said:
Might be your screen protector???
Click to expand...
Click to collapse
Nah, mine had it from the start.
After almost 2 years, it has only just had the "T" of the soft key a little not so sensitive. The rest are ok.
Maybe re-calibrate may help???
I wonder...
Does this have anything to do with the devices 'Double tap sensibility' setting??
Just a thought... Maybe, as I have never had a problem like this so not really sure!!
Screen trouble multiple selecting
I had this trouble and found a definate fix its to with the loose contacts of the touch screen to the main board if u use a T6 screwdrivers under the batter is four screws lift the panel off. You'll see two grey bit where the coaxile cable joins to the board make sure the connection isn't loose put a folded piece of paper on top or something to keep it tight, i think its the top grey bit but u'll ave to keep testing till you get it right maybe bottom, then put the bottom panel back on screw it up put the battery back and it should work, well did for me.
hope this helps.
shaunyboi_91 said:
I had this trouble and found a definate fix its to with the loose contacts of the touch screen to the main board if u use a T6 screwdrivers under the batter is four screws lift the panel off. You'll see two grey bit where the coaxile cable joins to the board make sure the connection isn't loose put a folded piece of paper on top or something to keep it tight, i think its the top grey bit but u'll ave to keep testing till you get it right maybe bottom, then put the bottom panel back on screw it up put the battery back and it should work, well did for me.
hope this helps.
Click to expand...
Click to collapse
Hi just Wondering would you think this could be a problem with one that when the screen is opened and spun so the touch screen is on the outside that the touch dose not work?
It works fine when i just open it its when i spin it and close it again that it loses its touch.
Any ideas as to what might be wrong would be appreciated. ill try the suggestion above anyway.
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..
am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?
I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.
I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.
Nah.. I dont think its because of widget locker.. its the digitizer..
well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...
I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?
Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App
I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?
I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
My problem got worse and the phone became totally unresponsive, changed it, got a new phone.
Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.
I still recommend the same thing that i posted earlier here, her screen still works perfect.
I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.
I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.
Hello all, I hope this post can help you with the same or similar problem I had.
My LG gt540 started having a problem 2 months ago, the touchscreen got offset by 2 centimetres(1 inch) verticaly down, this was very annoying specially texting and couldnt access the top panel. Ex: to unlock the phone I had to press 1 inch above the green button.
Sometimes(I dont know why) it went back to normal, but about a week since the problem started it just got permanent, I tried rebooting, taking the battery, etc, nothing worked... Even tried to go to the calibration option but the offset was to much so it said out of range...
Then I read something online about the heat caused touchscreen problems, so I was thinking... hardware dont really like heat, and I always carry my phone on my pocket, the body heat could be damaging the touchscreen, lets try cold, it could solve it, long shot but what do I have to lose?
Left my phone in the freezer for 10 minutes, turned on, and it worked! for 1 month now its back to normal!
Hope it helps you, but try first freezing it powerd off, may be safer.
i have got my phone 2,5 years and i havent got any insue with the touch screen
Hi
My phone started doing the exact same thing a week ago...
This is the only thing I haven't tried, lets see if it works for me....
Thanks
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
mseebass said:
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
Click to expand...
Click to collapse
I have problems for the outer 4 sides.
It's worth to try.
Didn't work for me, it was only fine for 5 minutes....
Also didn't work for me.
Besides, after puting it in the freezer the display protection foil now looks a bit strange.
mseebass said:
I've had screen calibration problems since i started flashing custom roms.
In my case the screen positions are slightly off at the right side of the screen. When I want to type an "p" i have to touch where the "o" is on a german keyboard.
I'm trying your solution right now.
Click to expand...
Click to collapse
I vave thar problem too, but I didn't find any solution...
Varrasco said:
Hi
My phone started doing the exact same thing a week ago...
This is the only thing I haven't tried, lets see if it works for me....
Thanks
Click to expand...
Click to collapse
hope you fixed it
Hi, sorry for waking this thread up.
I also have the same problem, press 'o' to get 'p'.
I want to ask you guys who already tried this method. Did it work?
It's tempting, but it might be better to know more info.
Thanks.