Database Users

touch screen not responding

lately the touchscreen on my T-Mobile MDA sometimes stops responding, sometimes after slowing considerably. Up till now I have been able to get it going again after (several) soft resets, turning it on and off and fiddling around with it in general. There doesn't seem to be much of a pattern to it though.
Does anyone experience the same problem and/or know what might cause it and how to fix it?
Thanks!

Too many programs running? X doesn't close programs, it just minimises them.

Joost said:
lately the touchscreen on my T-Mobile MDA sometimes stops responding, sometimes after slowing considerably. Up till now I have been able to get it going again after (several) soft resets, turning it on and off and fiddling around with it in general. There doesn't seem to be much of a pattern to it though.
Does anyone experience the same problem and/or know what might cause it and how to fix it?
Thanks!
Click to expand...
Click to collapse
U need the file tpenable.exe (you will find it in external rom package)

U need the file tpenable.exe (you will find it in external rom package)[/quote]
I'll give that a try. I assume it will explain itself as to how to use it.
Thanks a lot!!!

27 said:
Too many programs running? X doesn't close programs, it just minimises them.
Click to expand...
Click to collapse
Nope. I checked and once or twice even a soft reset didn't fix the problem, so there weren't any programs running at the time. Thanks for the suggestion anyway, though; I'm pretty new at this XDA stuff, so you never know

Previous 2 entries were mine. Forgot to log in, sorry

Hi,
Man I know how frustating that is. I had a similar problem a few weeks ago where the touchpad only worked when I used my fingers, it didnt' respond to the stylus at all... I was *this* close to hard resetting or sending it in for repair, but a friend of mine suggested re-aligning the screen. Worked like a charm. Give it a try. I'm bogged down at work so I dont have time to look at where it was, but I think its in settings > screen somewhere.
Good luck!

Yesterday i cut a Screen Protector from an Ipaq hx 4700 to fit my Qtek S100, i cut it a little bigger so that it would fill the whole screen and be under the edges, what happened was that i couldn't tap anywhere, i did a Hard Reset thinking it was a bad configuration or something i did wrong, but the problem was the screen protector...i removed it and know it works just fine! I used Xbackup to restore my data and everything now is right!except i don't have a screen protector...

cyborg said:
Yesterday i cut a Screen Protector from an Ipaq hx 4700 to fit my Qtek S100, i cut it a little bigger so that it would fill the whole screen and be under the edges, what happened was that i couldn't tap anywhere, i did a Hard Reset thinking it was a bad configuration or something i did wrong, but the problem was the screen protector...i removed it and know it works just fine! I used Xbackup to restore my data and everything now is right!except i don't have a screen protector...
Click to expand...
Click to collapse
Yeah, I read about the screen protector issue before. That wouldn't explain why it is working fine most of the time in my case though. About your problem, the general consensus seems to be that the problem is the screen protector touching the sides. You could try again but cut it slightly smaller.

U need the file tpenable.exe (you will find it in external rom package)
Click to expand...
Click to collapse
What's for this one?

Minotavrs said:
Joost said:
lately the touchscreen on my T-Mobile MDA sometimes stops responding, sometimes after slowing considerably. Up till now I have been able to get it going again after (several) soft resets, turning it on and off and fiddling around with it in general. There doesn't seem to be much of a pattern to it though.
Does anyone experience the same problem and/or know what might cause it and how to fix it?
Thanks!
Click to expand...
Click to collapse
U need the file tpenable.exe (you will find it in external rom package)
Click to expand...
Click to collapse
I've tried running this on the device but it doesn't seem to do anything. What am I missing?
I've even removed the screen protector, but that didn't fix the problem either. Right now it is part of the screen (lower left) that is not responding. It's starting to get pretty annoying, but I'm reluctant to have T-mobile send the device off for repair. Since there's no fixed pattern to the problem I expect some repair guy is probably just going to hard-reset it anyway, try if it works for 5 seconds and send it back

Joost, let me know if you managed to resolve this... I have the same problem:
http://forum.xda-developers.com/viewtopic.php?t=18224

Will do, but it's not looking good. I can't seem to pin down a pattern, so it's hard to try and eliminate possible causes. I'm 99% certain it's a software problem; it comes and goes and I'm not even using a screen protector that might cause it. It seems to have something to do with calibration/alignment, because usually it's only part of the screen that becomes unresponsive (bottom left or bottom right mostly)...

As you can see (in the thread linked above), I managed to solve it -- it seems like there was a registry setting (in my case).

Did you ever manage to pin down what registry setting was responsible?

no, I didn't spend any time/energy on it -- but you can follow my steps if you want to try that route.
But I am not sure it is the same in your case, for mine it was constant after the ROM upgrade, not something that would come and go...

I think I've got it!!! Bad touch screen response (and general slowing of the device) seems to be related to weak/no network reception. Probably Windows Mobile gives priority to reestablishing network connection over some other processes, amongst which is screen response. This would be ok if the network routine only tries at intervals, freeing up time for other stuff inbetween, but it seems it just keeps trying continuously.
The way to solve this is probably to lower the priority of the network connection routine. So far, so good... Does anyone know if this can be done, for instance by changing a registry setting? If so, which one and what value?

Joost said:
cyborg said:
Yesterday i cut a Screen Protector from an Ipaq hx 4700 to fit my Qtek S100, i cut it a little bigger so that it would fill the whole screen and be under the edges, what happened was that i couldn't tap anywhere, i did a Hard Reset thinking it was a bad configuration or something i did wrong, but the problem was the screen protector...i removed it and know it works just fine! I used Xbackup to restore my data and everything now is right!except i don't have a screen protector...
Click to expand...
Click to collapse
Yeah, I read about the screen protector issue before. That wouldn't explain why it is working fine most of the time in my case though. About your problem, the general consensus seems to be that the problem is the screen protector touching the sides. You could try again but cut it slightly smaller.
Click to expand...
Click to collapse
I had the exact same problem of non-responsive touchscreen once i installed the protector which came with the device. After reading thro this thread, i slightly lifted the protector from the bottom edges and VOILAA!! the screen works again.
Strange problem this !!! Thanks for all the help.

Help! Stuck on Align Screen!

Guys, I hope you can help me!
I was using my Imate Jasjar when it was accidentally bumped by another person. the Jasjar fell but it wasn't that high and the floor was carpetted. However, I noticed that whenever i try to tap on the Start button on landscape mode, the calendar application opens up! And when I try to tap V-Bar on the other corner opposite the Start button, the Contacts application opens up. Basically, the soft keys on the bottom screen are the one opening up even if I'm tapping the ones on top! If I tap the bottom soft keys, I thought the Start button or my V-bar would come out but still the Calendar and Contacts applications were the ones that opened. Basically the everything on top cannot be tapped!
On Portrait mode, I can tap the start button but when the V-Bar was tapped it still opens the Contacts application.
I went to Settings then Screen to re-align the screen. I thought it would solve the problem but apparently it didn't! I was trapped in the Align Screen section giving me an endless loop to tap the 5 areas of the screen.
I now did a Hard Reset, and now I'm forever got stucked to the Align Screen part.
What am I supposed to do??? Please help!!!

Hi,
Seen the same problem... Try to guess the error margin of the alignment...
for example instead of tapping in the center of the cross try tapping on left or right... Since your screen isn't aligned you can't press on the center...
Now the problem is hardware, not the MB but the LCD...
After tou figure out the margin error, the Universal will resume and then you ca align the screen via Start->Settings->System, align screen
I'll try to know more about this problem asking my friend.
Best of luck

thanks for your reply!
i also believe that it has something to do with the LCD. there are no cracks whatsoever. problem with the aligning is i have to keep on guessing. and if ever i do align the screen successfully, i'm not sure if re-aligning the screen in Settings would solve the problem.
i would appreciate though if your friend or anybody else can shed light to a solution.

This is a simple problem to solve ;-)
When the allign screen is ON and you have to make the first tap on the crosshair (just before you start clicking away to allign your screen), twist your display from landscape to portrait mode...
Now continue to allign it as usual, and you should finish successfully!
Cheers,
San

unfortunately, after following your instructions, i still went on an endless loop on aligning the screen. i'll try to reflash the rom and see if it would work. i hope it does...

i updated my ROM. still stuck on the alignment screen!
any more ideas?

To be honest, sounds like your screen is broke. Even if you got it to align, I doubt it would be very usable. I think you are looking at repair - if there's no visible sign of damage, you might get away with a warranty repair.
Cheers,
Steve.

Hi
Few months back i've got exactly the same problems (odd LCD behavior, impossible alignment, etc...) with an HP4700. I went to the service center and they had to replace the LCD screen. They did not charge me and take it under warranty. In my case the unit did not drop and i made it clear to them. I would suggest you go back to the service center and forget about the drop in your problem description .
Cheers,
Bruno

I had the same thing happen on a HP 3700, I did not even drop it all i did was install the Quake game for it and after a few days the screen alignment went a bit out. It was usable but definately out by about 1 cm in each direction. The unit had not been dropped. I went into the allign screen utillity and ended up in the infinite loop. The only way to fix was a new screen. But unforunately it was no longer under warranty. The screen consists of 2 separate parts the lcd and the touch screen bit. In my case the lcd had no issues just the touch screen. Very annoying but there you go.
Search your soul and do what you feel comfortable with.
Good luck
Charlie

thanks for all your replies!
i've made several searches yesterday with similar problems (even if they're using different PPC models) and they all ended up sending back their units for repair. there's even one who posted in expansys with the same exact problem!
we'll be sending it back through expansys (we got the unit from them) and hopefully get it back before the end of the month. and yes, i won't tell them that it was dropped, he he :twisted: and they won't find evidence either on the outside because there are no physical damages. what a start of the new year for me <sigh>
right now i'm back using my XDA IIi.
thanks for all your support! this is my first thread/topic in this site and it's so unfortunate that it had to be sort of a negative one. looking forward to be active more here!

Hello there
This might help (I am currently wrking with 200 PDAs so have had this a few times)
THere may be a iece of dust/biscuit crumb etc, under the edge of the casing above the screen, try using a post it note or paper and go around the casing/edge of screen, this should clear the screen of anything that may be causing this problem.
THis worked for me on the majority of non-aligning screens
HTH
DB

My story was, one day when I needed to twist the screen, it was a bit stuck so I twisted a bit harder, yes it went back. Then few days later, the mis-alignment started and since then I have been keeping to do re-alignment my screen.
My screen is mis-aligned once every 2 or 3 days or even few minutes then I have to re-align by using WM5's alignment program. It sometimes takes me 2 or 3 times or even one time.
The most anoying thing is it keeps forget after aligned screen.
Now, certainty, I don't think it is a screen problem because after running alignment app, it correctly pointed into the right spot but then it forgot where the right position was.
I have done the upgraded ROM ( even tried Ivan AKU 3.2 ROM ) but problem still persisted.
I just tried clean up the edge of screen, finger cross, hope it fixes my problem.
Bad thing is, I bought my device from UK and I am living in Australia so therefore, my warranty is definately invalid. I don't want to spend 200 AUD for the new screen ( unless I am 100% sure that LCD is faulty ).
Anyone has any idea or even a better suggestion because I don't see many people having this problem.
I suspects that maybe the flex cable got ripped but not totally ripped. Don't know , please help me out on this one
Best regards

Anyone has any idea about my problem ??
One question :
I know that the flex cable has 2 connectors ( one is for LCD display and another is for LCD function ). Now does LCD function relate to the touch screen function ? and if one tiny wire of the function cable got cracked, but not totally cracked, will it affect the touch screen function ?
Other thing, does WM5 store any setting relating to screen alignment setting ? If yes, where is it ?
Thanks

Hi, from another forum, it only help to bypass the alignement loop:
"here you go theses are simple steps to bypass the touchscreen alignment.
Install you activesyn blah blah blah when it finds it go on my computer and go into your PDA device
go to windows startup and delete the Welcome file
after that give your PPC a soft reset and BAM u by passed the screen now get a free desktop program liek pocket controller from the internet it will automatically install on your pda and BAM you can control your pda add music and whatever
but now if you want to click stuff on the road get pen irazu just search on google and send it to your PDA then go to file explorer and double click it and you got a cute little mouse program that you can use like a stylus"
also try this little soft:
http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
Hope it helps.
MaX

Hi godtakeit!
I've had the same problem a few weeks ago (and still having it from time to time) and for me a slight (very careful) bending of the screen makes it work again. It seems to me that there are connector behind or near the display which has some loose contacts.
Did you notice any other problems which came in conjuction with the alignment problem (e.g. speaker not working)?
.ox

Hi oxident
No, I don't have problem with speaker ( it was not working before but it is because of the jack plug problem - it solved ). Yeah, I did notice if I bend the screen carefully, the problem is gone. The funny thing is when I aligned the screen, it worked but if I closed it off and left it over night, it started again when I opened the lid.
You may right about the connector between LCD screen and mainboard. Well, I have no choice but openning the device and check it up.
Also, I read the thread somewhere in this forum and somebody advised this problem maybe relates to magnet around device. My brother aslo advised me that LCD charged and reserved negative electrons. Wierd but I am experiment it at the moment ( taking off battery and leave the device for a few days so that it can release the negative electrons ).
Hope it fixes

please help
i have an imate jas jam that i i got from my father he used it for like 3 years and it is pretty banged up so i cant use the warranty and repairs cost a lot, any who i got it yesterday and it was very slow so i reset the settings and now im stuck on the align screen it keeps going on for ever and ever if any one knows any thing plzzzz help

Welcome aboard
You have one of the best HTC devices ever made!
Have a look here to locate the solution to your prob:
http://forum.xda-developers.com/showthread.php?t=549207
Post number 2
Good luck,

Hermes broken? Clicks upper right corner constantly!

I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs! I'll soft-reset and sometimes it wont boot up, it just hangs at the windows logo screen. I upgraded the ROM to the newest from Cingular thinking it was some program that was doing it, but it comes back.
When it's in portrait mode, it's the upper right hand corner. When it's in landscape, it clicks the start button(upper left) so I dont think its a program thats making it click, but something physical touching that certain spot. Anyone have any idea?! I thought something was stuck in there but it's clean.. this is so annoying, I cant even make a call since it clicks exit when it comes up! It stops SOMETIMES for a few minutes but then it comes back after a while.. anyone else?

Give it a yung choo kung foo whack, take a run-up.
...
Sounds knackered, you could try the screen alignment fix, pressure from the gasket may be causing this:
http://wiki.xda-developers.com/index.php?pagename=How to fix the Screen Aligment issue
Your best bet is to send it back for repair though .

I bought it off ebay.. so no warranty
It's weird because I take a very slim credit card( 1/2 the thickness as regular cards) and slide it in and bring up the plastic around the screen and it STILL does it!! nothing is touching the screen at all. Also, my alignment is still spot on perfect.. what gives?
Oh yeah, I did smack it a few times and it works sometimes.. It's been okay right now for about an hour but I know it's going to be short lived..

Did you try loosening the screws?

MilanoRex said:
I've had my 8525 for about 3 months, and now it constantly clicks the upper right hand corner and exits all of my programs!
Click to expand...
Click to collapse
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel

tadzio said:
Yours is the third or forth report of that error. My Trion had the exact same problem, and I needed to exchange it (bought it new from O2, so it was under warranty).
None of the screen alignment fixes I tried made any difference. The problem was also temperature dependent - when the Trion was cold, everything was okay. Leaving backlight on and listening to MP3s for five minutes was enough to make the problem appear - first, only a few fake 'taps', then more and more, and eventually the screen didn't recognize any of my taps at all.
So it seems to be a hardware issue. The only software solution I could think of: back in WM 2003 days, there was a registry setting to increase/decrease the touchscreen sensitivity. If it still exists in WM5 (don't know, sorry. Others may be able to tell you), you could try setting it to be quite insensitive. Might help.
Cheers
Daniel
Click to expand...
Click to collapse
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.

Your case is putting pressure on that part of your screen. It is not device specific. Slip a piece of paper under the case to check for clearance. I use under the case screen protectors and have seen this before. You may be able to simple pry the case and create some clearance.

I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated

MilanoRex said:
Thanks for the reply, now that I think of it, it only happens when it's warm. Looks like I'm SOL. Oh well, I guess ill put up with it until the iPhone comes out.. ill try loosening the screws too.
Click to expand...
Click to collapse
The iPhone? You're going to actually exchange this beautiful piece of full-fledged mini-computer &phone in one goodness for an iPhone? Note: This was not meant to flame anything or anybody. If you feel that I have, I deeply apologise.

jotham said:
I have exactly the same symptoms. It seems the registry settings do not exist in the Hermes to adjust the sensitivity so I am thinking return for replacement must be the only option. Argh! I feel defeated
Click to expand...
Click to collapse
I've inserted a small piece of plastic between the frame and the screen (one month ago).
Here you will find a resume of proposed working solutions
http://forum.xda-developers.com/showpost.php?p=1056346&postcount=227
Can you tell us the serial of your Hermes? (HTC62xxxxx, 63, 64)

That is the same problem I had with my 8525. I tried ALL the solutions here in the forum but nothing solved it. I finally returned it to Cingular and they gave me a brand new one with zero hassle. Two weeks in on the new one, and it's working like a champ (knock on wood).

the S/N is HT657xxxx
Nothing is putting pressure on the screen, I've pried some clearence between that part of the screen and it still does it. I dont even have a Cingular account, so I doubt they'd help me
My only other option is to take it apart(following the japanese website instructions) and see what's going on.. Maybe something underneath the screen is doing it? I dont know..
Oh yeah, not only did i loosen the screws behind the screen but I completely removed them and it STILL does it. I found the registry setting for screen sensitivity and lowered it from 7,xxxx to 5,xxx and it did nothing..

Vertical touch area not working

Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
I have also no idea what the reason is why its not working. It did not drop on the floor or something like that.
Thanks in advance,
Erlerain

erlerain said:
Hello,
After many hours of searching I havent found something that is like my problem. I got this model recently, and now the touch area issint working. In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
I havent tried a hard reset or something. And Im running the standard Vodafone rom on it. (Windows mobile 5)
Is this problem hardware or software? and is there perhaps some kind of software so I can get a mouse cursor with my Arrow-keys?
I hope you guys can give me some answers. Its a waste not using this phone
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Welcome to the forum
I´ve never heard of this problem, but if I were you I try to reflas with another ROM to see if corrects (see the Wiki to learn how to), if not perhaps could be a hardware problem...
Good luck,

erlerain said:
Hello,
... In landscape mode only the bottom of the screen is working.
Is does not mather if you push for example in the left upper side corner or the left lower side corner.... Both will result in getting "Phone" up
...
Thanks in advance,
Erlerain
Click to expand...
Click to collapse
Have you tried to re-align the screen?

wovens said:
Have you tried to re-align the screen?
Click to expand...
Click to collapse
Yes, but it is not getting the points that it should get. So you can try it a thousand times, and it would not make a diffreance.

Anyone? (sorry to bumb)

I have the same problem. Though I read on someplace that the screen is actualy getting pressed somewhere. try these steps and check after each try.
1st: Massage the screen softly all over.
2nd: Take a something very thin and move it under the edges of the screen.
3rd: (this on is the one that usualy works for me) try to tap softly on the back of the screen.(The aluminum plate) tap it all around the back of it.
4th: (this is the last way out when step 3 doesn't work for me.) Tap softly around the screen.
Gonna put up a video on youtube on how I do it. so you get to know how hard to tap and stuff. Since I guess we're not the only people with this problem.
Edit: Ehm. does anyone know a good free webcam recording program so I can make a video.

Ive already tried those steps. did not work

Then open the monitor part of the phone and press on the backside of the LCD.

Yep, thought the same. Ive tried to open the casing of the monitor part, but its pretty hard to get the plastic cover off
Ill try it soon again.
Thanks MiZore for ur active answering

No problem, but if you find a solution that lasts please write how here. Because I also have this problem. You have to use a little force to the the cover off. There is a dissassembly guide somewhere, I can find it for you if you haven't used it already.

i dont have that guide

Here's the guide
http://wiki.xda-developers.com/index.php?pagename=HTC Universal Service Manual

I've found another temporary solution. Take a good grip on each side of screenpart of the universal, then bend it softly back and then forth. This hasn't failed me once yet. But still no permanent solution.
gonna open mine and put something that will apply a constant pressure to the back of the screen like som cotton or something simmilar. I'll let you know the results.
Also, do you use a replacement battery or the original that came with the Uni?

Okay I opened it up today, and I think I've found the problem. Though not 100% sure. From my inspections one of the cables(small ones inside the silver tape) on the flexcable is not connected. and sadly I'm not that skilled with fixing it. So I'm gonna order a new one. I will tell you if it helps.

Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull

erlerain said:
Okey, so I continued working on the uni today again.
Ive de-assembled the entire screen section. inspected it if anything looked broken. Wich was not the case.
Re-assembled everything again. but I still have the same problem.
As far as I know I use the retail battery
When I have some spair time ill try to look for some damaged cables.
I dont see the future of this device very brightfull
Click to expand...
Click to collapse
Well I had to cut open the gray cover for the cables to see the damage.
But I'll see what happens when my new cable arrives.

I've installed the new cable and that fixed the touchscreen for me.
But now my sound won't work for some reason....

Screen Air Bubble! Advice?

Hello all.
I've had my XV6900 when it was first released and it's been though hell, but it has held up until now.
I woke up yesterday to find that my touch screen isn't working. Before I went to sleep the previous night, it was working perfectly fine.
I've done a million resets, took the battery out, etc. and only ONCE the screen started to work normally for a minute or two before reverting
back to the non-responsive inputs. I can navigate the phone just a tad by using the buttons, but obviously it does not suffice.
I noticed that on the bottom left corner, there seems to be an air bubble type blemish. I think it's misleading my phone that I am putting
pressure there myself, resulting in me not being able to touch to my liking and use it properly. I can answer calls only and do limited commands
by using buttons but text and email are my main form of communication -_-x
Surely a hard reset will not fix the problem, correct?
My only way to get this phone back in order is to try to find a digitizer, right?
(I am using My Mobilizer on my desktop right now to communicate with others and I was also wondering if there is a way I can save
my contacts INSTEAD of using Active Sync. My version of Windows VISTA did not come with Outlook -_-x.)

rynpaulbert said:
Hello all.
I've had my XV6900 when it was first released and it's been though hell, but it has held up until now.
I woke up yesterday to find that my touch screen isn't working. Before I went to sleep the previous night, it was working perfectly fine.
I've done a million resets, took the battery out, etc. and only ONCE the screen started to work normally for a minute or two before reverting
back to the non-responsive inputs. I can navigate the phone just a tad by using the buttons, but obviously it does not suffice.
I noticed that on the bottom left corner, there seems to be an air bubble type blemish. I think it's misleading my phone that I am putting
pressure there myself, resulting in me not being able to touch to my liking and use it properly. I can answer calls only and do limited commands
by using buttons but text and email are my main form of communication -_-x
Surely a hard reset will not fix the problem, correct?
My only way to get this phone back in order is to try to find a digitizer, right?
(I am using My Mobilizer on my desktop right now to communicate with others and I was also wondering if there is a way I can save
my contacts INSTEAD of using Active Sync. My version of Windows VISTA did not come with Outlook -_-x.)
Click to expand...
Click to collapse
are you using a screen protector?
you can sync contacts with google http://www.google.com/mobile/products/sync.html#utm_campaign=en&utm_source=gh0ssy&utm_medium=ha&utm_term=google%20sync&dc=gh0ssy
i would try a hard reset before looking into getting a digitizer - my $.02

I was thinking about the hard reset but if the screen blemish, which looks like it's separating on the inside, is there... it wouldn't matter if I did a hard reset.
I think.

rynpaulbert said:
I was thinking about the hard reset but if the screen blemish, which looks like it's separating on the inside, is there... it wouldn't matter if I did a hard reset.
I think.
Click to expand...
Click to collapse
yea sounds like its time to check ebay for a digitizer

jamezelle said:
yea sounds like its time to check ebay for a digitizer
Click to expand...
Click to collapse
Do you have an issue or something?