hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
bartosz77s said:
hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
Click to expand...
Click to collapse
Who did the work? You or somebody else.
Kirby
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
bartosz77s said:
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
Click to expand...
Click to collapse
I think that you are stuck with taking it apart again to see what you missed. Not sure where the magnets are located I have scanned thru the manual but haven't given it a real good reading yet.
Good Luck,
Kirby
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
bartosz77s said:
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
Click to expand...
Click to collapse
Whoa 3 times you are an expert at taking the thing apart at this point. I don't have any other ideas but with any luck somebody will give you an answer. Sorry i couldn't be more help.
Kirby
Related
I somehow managed to get water in my screen so now the tapping function doesnt work. I dont know what else to do. I am currently in Beijing and bought it second hand so I'm not sure if the warranty is still in place and if so how abouts to get it to a retailer. The only thing I want to do now is try to open it up and see if I can try to clean up the moisture and water since its still there. I tried opening it but there are only two screws at the bottom back side of the unit that are available to me to get to. I'm not sure how to go about and disassembling the whole thing. The pda is really important to me since I use it as a chinese dictionary. I dont know what else to do. Any help would be appreciated. Bye
saiyajinsc said:
I somehow managed to get water in my screen so now the tapping function doesnt work. I dont know what else to do. I am currently in Beijing and bought it second hand so I'm not sure if the warranty is still in place and if so how abouts to get it to a retailer. The only thing I want to do now is try to open it up and see if I can try to clean up the moisture and water since its still there. I tried opening it but there are only two screws at the bottom back side of the unit that are available to me to get to. I'm not sure how to go about and disassembling the whole thing. The pda is really important to me since I use it as a chinese dictionary. I dont know what else to do. Any help would be appreciated. Bye
Click to expand...
Click to collapse
Firstly, you can check if it is still under warranty by registering it on O2 website, you will need the original receipt to claim warranty (and moisture damage is not covered by warranty). Secondly, if you want to fix it yourself and I dare say its too late as the battery would need to be removed immediately as moisture enters the device, even if you manage to get an LCD (roughly US$250)and you're able to fit it there's a posibility the main board and components are damaged too. However, I have repaired to some degree with many tedious hours of careful cleaning with pure Ethanol. My advice to you is send it to O2 for repair and do not put the battery into device!
can you tell me how to take it apart? everything seems to be working fine, just that certain areas on the screen i can't tap. I know there are two screws at the bottom back side of the unit where it says void. But other than that I dont know what else to do to get the unit open.
saiyajinsc said:
can you tell me how to take it apart? everything seems to be working fine, just that certain areas on the screen i can't tap. I know there are two screws at the bottom back side of the unit where it says void. But other than that I dont know what else to do to get the unit open.
Click to expand...
Click to collapse
the housing for the camera must be removed, very carefully, under that cover are two more screws.
try this, http://tatsdiy.com/tatsdiy.com_non_ssl/atom/
zecoj said:
try this, http://tatsdiy.com/tatsdiy.com_non_ssl/atom/
Click to expand...
Click to collapse
Bro there's nothing at this link or its broken, could you please upload the link again thanks in advance.
homer285 said:
Bro there's nothing at this link or its broken, could you please upload the link again thanks in advance.
Click to expand...
Click to collapse
here you go: http://tatsdiy.com/atom/
Thanks zecoj, however I have worked it out for myself and posted in this forum (what I believe is) the crucial stage of disassembly process. I cant believe how nicely designed the Atom is, for all its downfalls I now have new hope in my Atom....
homer285 said:
Thanks zecoj, however I have worked it out for myself and posted in this forum (what I believe is) the crucial stage of disassembly process. I cant believe how nicely designed the Atom is, for all its downfalls I now have new hope in my Atom....
Click to expand...
Click to collapse
Can you pl provide the details of the disassembly... Pics would be appreciated... Thanks in advance...
i think the water is in the screen protector..if your unit have a screen protector..i already see and replace my atom screen bcoz i break my lcd and it's all sealed by a static tape..noway to enter a water inside..can you take a picture of your unit that can see the water..maybe you screen is damage..you have to replace it..or lets think not..ill be waiting for your pics..
-=[serialzs]=-
B01070 said:
Can you pl provide the details of the disassembly... Pics would be appreciated... Thanks in advance...
Click to expand...
Click to collapse
check the wiki. click on my sig to jump directly to atom wiki
O2 pu10 disassemble
plz give me O2 pu10 disassemble video thanx in advance........
Go here for Atom disassembly
my phone is doomed when i follow the instruction the lcd wont turn the lights on but i can see the o2 image on it damned!
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
pod8 said:
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
Click to expand...
Click to collapse
Mmmm. Tricky perhaps. A hard reset will either cure or leave you stuck. If you hard reset and the screen is indeed dead (touch wise) then you'll never get past the alignment stage. If the touch issue is software related then you would be sorted with the hard reset.
A gamble I think!!
However you are stuck at the moment so in a sense you have nothing to lose. If it ends up being useless then you are faced with a warranty (hopefully) repair otherwise some DIY though it's not entirely obvious what has broken/come loose - possibly just a ribbon connector.
Mike
Maybe the ribbon cable came loose on the LCD side?
myztikal47 said:
Maybe the ribbon cable came loose on the LCD side?
Click to expand...
Click to collapse
Yeah i think its that as well, i hard reseted it a few times with no effect, in the begining of the day, it could still reconise the screen taps around 2/3 times before it totally went dead.
Are there any tutorials on how to open it up to check the ribbon?
Thanks.
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
myztikal47 said:
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
Click to expand...
Click to collapse
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
mikechannon said:
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
Click to expand...
Click to collapse
Ok my best bet is to take it to carphone, i got my screen replaced there a few months ago, think i still have a 1 year warrenty
Thanks for all your help anyways
Tytn Service manual
jblandon1024 said:
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
Click to expand...
Click to collapse
Here you can found the manual
http://www.megaupload.com/?d=0GD472TP
Roby
I have a problem with my herms 200...
it's my toutch screen... it doesn't work, evry time i touch the screen it open the windows bar, if i touch in the clock it opens the windows bar... i already try the calibration option, but it doesn't work too... i touch in the 5 point like it ask and it apears again, i touch the 5 points and it apears again, and again, and again...
what can i do??
pleass someone help me!
ps: i already try to update but it doesn't work too...
thanks...
ASGM
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Or the digitizer's about to die, You may need to replace the entire LCD. Happened to me too, started with little alignment problem that ended with no touchscreen...
Take my advice, download remote screen alignment. It allows the alignment info to be recorded to the pc so you can skip the alignment procedure after flashing a rom.
You can navigate by buttons for most things but its a *****. This is a stopgap so you can use your Hermes until you replace the LCD...
Cheers...
ultramag69 said:
Or the digitizer's about to die, You may need to replace the entire LCD.
Click to expand...
Click to collapse
I just installed my repacement screen last week. Can you post the link to the remote tool that you use?
Nokia 3650 said:
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Click to expand...
Click to collapse
I have seen this web site: http://inuchanbt.blog54.fc2.com/blog-entry-100.html
I have done everything there's asking to do, but that haven't work... now i have uploaded a new OS version to my herms and a can turn it on, cause i need to align the screen and i cant do that... :HELLLP:
I have uploaded a movie on youtube, with me trying to align my screen after turn on my herm... http://www.youtube.com/watch?v=TiHXEOPHPq8
thanks a lot.
ps:sorry about my english... im portuguese.
ultramag69 said:
download remote screen alignment.
Cheers...
Click to expand...
Click to collapse
Try google...
Hi all,
I'm real frustrated at the moment with my i-mate jasjam branded hermes 100.
It started a couple of days ago when my screen would get all glitchy. I ignored it. Then i got it whenever i put pressure on certain parts of the casing and now from that it manifested and it does it whenever i hold it in a certain position etc... It's really starting to tick me off... 1300 dollars for this? has anybody experienced this issue? ive heard it's a hardware problem... im running shamanx windows mobile 6 ultimate rom...
I need my phone to keep in contact with some real important people.. any ideas?
BUMP
BUMP
howcome some other dude with a similar problem got replys instantly?? he didn't even use tags can anybody pleeasse help me???
Gr33kJag said:
BUMP
howcome some other dude with a similar problem got replys instantly?? he didn't even use tags can anybody pleeasse help me???
Click to expand...
Click to collapse
He may have been lucky. Here we re-use threads and there have been quite a few on the white screen problem.
Here's one of the main ones - I suggest you look at the suggestions about placing a pad on the D-Pad chip:
http://forum.xda-developers.com/showthread.php?t=321163
Mike
Ohk
ohk sorry but the buttons do work perfectly fine it's only the screen... also the usb port is loose so whenever i need to charge i need to push it in a particular way so i just place it on its face upside down to charge and i use an ftp program to get files off of it insstead of usb >-< it was a really nice phone till it started doing this and cbf sending for repairs il just buy a new phone when i get the money and yeah if i decide i might try something that requires opening it up but i just cbf
Gr33kJag said:
ohk sorry but the buttons do work perfectly fine it's only the screen... also the usb port is loose so whenever i need to charge i need to push it in a particular way so i just place it on its face upside down to charge and i use an ftp program to get files off of it insstead of usb >-< it was a really nice phone till it started doing this and cbf sending for repairs il just buy a new phone when i get the money and yeah if i decide i might try something that requires opening it up but i just cbf
Click to expand...
Click to collapse
Well, the reason to pad the D-pad chip is because the d-pad circuit board is the one that the screen connector connects to and the chip is the one that processes the screen signals. So although your buttons work fine, it is still that board that causes the screen whitening.
The usb port sounds like the anchoring solder joints may be cracked. These can normally be resoldered.
Mike
Hi Gr33kJag,
Try to perform the solution provided by mikechannon only if u can assemble and de assebmle ur pda very accurately, because the pros and cons of that method are describle in that page.
This solution worked for me at least and i am very much thankful to mike for giving me solution to that problem.
Hey guys, I have been so much frustrated about my htc topaz....till now it is working perfectly. Since yesterday all of a sudden touch screen stops working...with ballooning effect on screen ...previously ballooning effect was noticed before 3-4 days,but i did not pay attention on it as touch screen working at that time..
What may be the probable cause is it digitizer or lcd screen gone?
I have uploaded the pictures also..
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
I had the same problem, is very usual in this phone. the tecnical changed the screen.
luisitron said:
I had the same problem, is very usual in this phone. the tecnical changed the screen.
Click to expand...
Click to collapse
The problem is that my phone came from China... So I would have to send it there, and that's not an option...
rvrosa said:
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
Click to expand...
Click to collapse
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
Please explain that better? I only have to stick some scotch tape on the screen and peel it off?? I have a screen protector, so it's better to take it?
Thanks
indresh88 said:
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Click to expand...
Click to collapse
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
rvrosa said:
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
Click to expand...
Click to collapse
Well according to my research...If you have standard htc phone, you have device name t5353,no dual sim,htc written on left side and front camera on right side....
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
it helped me quite good and temporery, but how to fix it permanently...?
replace the touch screen digitizer.
eBay have many of them...
I have replaced my cracked one last month.
Two fixes for the scotch tape issue
1. Always take along some scotch tape or
2. Replace the digitizer. This can be done faily easily, see some other posts.
Cheers
I've looked at ebay for the digitizer and I've found many... the question is if they work on my phone?
I have a DUAL SIM T5388i, can anyone point me the right digitizer?
I've tried the tape but didn't worked I don't know if I'm doing it right because I've noticed no diference.
Help me!
I also have this problem, It just stopped working. I was calling, 10 minutes later when i took my phone and tried to unlock it, it did nothing, when i connect my phone in windows 7 with mobile center, I installed SOTI pocket controller, to check if it was my screen, and it was because via pocketcontroller it worked good, but how do i have to replace the screen thing, and how does it work with the tape,,
Thanks
i also had the same problem. if im not mistaken it might be due to humidity ...
i might be wrong
is there any way to fix this without replacing digitizer.
by the way i have a TD2 t5353 htc original .
Workign Solution Till Now
Hello Friends,
I have TD2 mobile and today I had same issue. I was thinking it was because of the weather or some.
I remember it did happend several time before, but when I restart the device several time it does work. So I was ignoring.... But today it did not work.. looks like going toward end... So I did soft and hard reset without and that did not helped me.
So I switched off the mobile, "heated" the touch screen gently with my hand for 1 min and started the mobile again and it worked for me .
Not sure if this is a solution, but will work.
May be I will contact Service Center here in Hyderbad and see what is wrong here?
Hope this will help you all...
Thanks.
Well, I've solved the problem... changed the digitizer...
rvrosa said:
Well, I've solved the problem... changed the digitizer...
Click to expand...
Click to collapse
How much that costs you?
prabhat said:
How much that costs you?
Click to expand...
Click to collapse
Take a look at solonomi. That's the place I've bought it.
digitizer for t5388i
Hi, I want to buy digitizer for t5388i, but I didn't find it. I searched at solonomi, ebay, alibaba... Have you any ideas where to buy? Digitizer for t5388i is not same with other t5388 models. Here is picture:
imageshack.us/photo/my-images/263/digitizer2.jpg/
(sorry for incomplete link, but I don't have permision to add images or links)
Many thanks.