After soft reset not save sound setting. How to make that customisations were saved?
Related
I'm one of those people who had an MP3 association problem with ringtones after I installed a 3rd party MP3 player. I took the proper steps to correct the file associations and got the device working with the proper ringtones. My contacts who have personalized ringtones all work and work after the device reboots; however, my phone's deafult ringtone won't stay after reboot. I have it set to OldPhone; however, after a restart the device always put it back to Windows Default ring. Any ideas what's causing this?
If you are used to do registry tweaks change it here HKCU\control panel\soundcategories\ring\defaultsound
put the name of your preferred default sound there
Or take a look in HKCU\control panel\sounds\ringtone0\sound
when you change the phones ringtone in settings\phone the change should appear here.
Bump.
Even after a hard reset this problem is happening again. I've even tried changing the settings directly with a Reg editor but they don't stick. Any help/solution? I hate the default t-mobile jingle.
makisupa said:
Bump.
Even after a hard reset this problem is happening again. I've even tried changing the settings directly with a Reg editor but they don't stick. Any help/solution? I hate the default t-mobile jingle.
Click to expand...
Click to collapse
Should have been fixed after a hard reset - you must somehow have a corrupted rom - take it back to t-mobile or flash with original (keeps warranty) or new rom.
Does anybody know why this happens:
Whenever I change registry (for example HKCU\Control Panel\SIP\..), after reboot it gets reverted to original value.
I used Total Commnader. Roms I tried: 2.17 (qtek) and 2.24 (cingular).
Help appreciated.
Thanks.
after changing your registry, be sure to save the changes by a soft reset. To do this, do NOT poke the reset hole with your stylus, but rather shut the device down with the on/off button. Hold it for 5 secs untill the warning pops up. By resetting this way, your device uses the 5 secs untill the screen pops-up to write the registry to the ROM. If you soft reset immediately with your stylus after chaning the registry, the device has not enough time to write the changes to the ROM. Therefore, after a quick soft reset with your stylus changes might not be saved and the registry remains unchanged.
Problems with Registry settings
I also have problems with Registry settings. For instance some values seems to change back after a turn off/on (power button). Does anyone have a good doc/link that explains which Registry settings that actually can be changed by CAB-files and stay changed ?
Just to mention - on an SP5 (sorry for this in Wizard/K-JAM) I had a CAB-file that changed the Contacts soft-button into starting a 3rd party application. This only changed when an incomming call/phone application was started..a little confused about that
Hello,
Does anybody know how to change "protected" registry value?
I have Treo 750v and I want to change the registry values in [HKLM\SOFTWARE\Palm\Varnish\Messaging\MMS]
- MMSC
- MMSProxy
- MMSUA
- MMSUAProf
I tried to change the registry values in this key using PHM regedit and TRE. I can change the values with both of softwares, but after soft reset (software / stylus), the values go back to the original one.
I tried the following, but no success...
- Overwrite *.rgu file
- Overwrite default.hv
- Rename [HKLM\System\ObjectStore\RegistryUpdate]
I had TyTN and had the same issue as all TyTN knows. This problem on Treo 750v looks like the problem on TyTN of changing clear type setting on landscape. But there was a solution for TyTN, which is TwkCL.
I would like to know how to change this kind of "protected" registry values.
I appreciate all feedbacks.
Thanks in advance.
not sure if they are protected. But WM5 has a delay write on their memory. You might want to change the value, then wait for (say) 5 minutes, switch it on and off (suspend/sleep) a couple of time before you do a soft reset.
Else, there may be software usign the registry?
hanmin
It is my understanding software reset have the same function as your method (on/off + stylus).
I would like to keep my registry setting after software reset or stylus reset.
I have a problem with my Qtek S200... after a soft reset, it seems to forget that a specific ringtone was set... if I go to phone options, I see my ringtone... but if click OK, it changes to Windows Default... I have to change it back to the correct ringtone...
After a soft reset, if I do not go in phone options to set my ringtone, my phone will not ring (no sound) if it's power save mode...
what can be the problem?!?
I have the 2.3.1 lzsw rom...
Hi Is there a registry setting to save your personal settings in audio booster instead of having to manually set them everytime you switch ur phone back on.
Thanks in advance.