Related
I have a fairly new TyTN, but it suddenly stopped working, freezing randomly and at short intervals.
I decided to send it in for repairs, but I havent been able to find the receipt, and even though I have the box and the warranty, I can do nothing without the receipt.
So I found the pages, and have tried several updates.
First I did the Hard spl to 2.1.0 olipro, and it went well.
Now the phone was with the three colored stripes, and unable to do anything at all (though quite stable ;-) )
I then tried several different updates, (RUU) but none came all the way, the best did 13% and froze (RUU_Hermes_QTEK_DAN_2.11.253.1_102_6275_1.38.00.10_108_Ship.exe)
I tried several radio only updates, but none got anywhere, all stopped with errors 262 or communications failure.
I was then able to do the update to Mobile 6 black (Pro_Black_3.0.1) and have a complete, working system, but without the radio !
Any attempt to update the radio since, has resulted in a bricked device, with the 3 color screen.
If i place the "soft slp) file on the device when its with windows mobile 6 and connected, the activating the .exe will immediately place the device in the 3 color screen brick mode, and I cannot update the radio from there either.
Can anybody help ?
I'd hate to believe that I now have a fully working PDA, but no phone !
microemission said:
I have a fairly new TyTN, but it suddenly stopped working, freezing randomly and at short intervals.
I decided to send it in for repairs, but I havent been able to find the receipt, and even though I have the box and the warranty, I can do nothing without the receipt.
So I found the pages, and have tried several updates.
First I did the Hard spl to 2.1.0 olipro, and it went well.
Now the phone was with the three colored stripes, and unable to do anything at all (though quite stable ;-) )
I then tried several different updates, (RUU) but none came all the way, the best did 13% and froze (RUU_Hermes_QTEK_DAN_2.11.253.1_102_6275_1.38.00.10_108_Ship.exe)
I tried several radio only updates, but none got anywhere, all stopped with errors 262 or communications failure.
I was then able to do the update to Mobile 6 black (Pro_Black_3.0.1) and have a complete, working system, but without the radio !
Any attempt to update the radio since, has resulted in a bricked device, with the 3 color screen.
If i place the "soft slp) file on the device when its with windows mobile 6 and connected, the activating the .exe will immediately place the device in the 3 color screen brick mode, and I cannot update the radio from there either.
Can anybody help ?
I'd hate to believe that I now have a fully working PDA, but no phone !
Click to expand...
Click to collapse
Did you follow the MrVanx guides?
Mike
You should try reading through this thread. Its quite lengthy so I would probably search for "error 262". Also, check out the wiki here and here Once you find out which type of brick you have (sounds like type 2), there are some steps to unbrick it. Good Luck!
To Mike:
Yes, I started out with the Mr.Vanx guide, but got stuck with the radio updating, it never got past the 0% mark.
To Peezy
I have done alle the threads, and all the different ways of updating, including through sspl.
I have not been able to figure out exactly what Radio bootloader i have, but I seem to have SuperCid, IPL-1.01, SPL-1.40.0lipro.
Its a HERM200 (TyTN) and the short of it seems to be, that I can easily do upgrades as long as they don't include radio.
Reading from the threads, I get the impression that I cannot update the radio in any way at all, if it's bootloader version >=1.09
Is that correct ?
- can you inform me how to read the radio bootloader version ?
In sspl mode I can conect with the mtty.exe tool, and send commands.
The set 14 0 command does not seem to work though, if I'm stuck in three color mode I can only get out by running an ruu without radio (I currently use the Pro black version)
This will get me the OS, but any radio updating still fails.
If for some reason it's not possible to update/fix the radio, will I be able to do it through any paid service ?
radio?
What is this thread about? I have the same phone but it does not have a radio.
What are you talking about?
microemission said:
I have done alle the threads, and all the different ways of updating, including through sspl.
I have not been able to figure out exactly what Radio bootloader i have, but I seem to have SuperCid, IPL-1.01, SPL-1.40.0lipro.
Its a HERM200 (TyTN) and the short of it seems to be, that I can easily do upgrades as long as they don't include radio.
Reading from the threads, I get the impression that I cannot update the radio in any way at all, if it's bootloader version >=1.09
Is that correct ?
- can you inform me how to read the radio bootloader version ?
In sspl mode I can conect with the mtty.exe tool, and send commands.
The set 14 0 command does not seem to work though, if I'm stuck in three color mode I can only get out by running an ruu without radio (I currently use the Pro black version)
This will get me the OS, but any radio updating still fails.
If for some reason it's not possible to update/fix the radio, will I be able to do it through any paid service ?
Click to expand...
Click to collapse
Firstly install HardSPL v7
Then install the latest Radio and see if it works.
microemission said:
First I did the Hard spl to 2.1.0 olipro, and it went well.
Click to expand...
Click to collapse
microemission said:
I have not been able to figure out exactly what Radio bootloader i have, but I seem to have SuperCid,IPL-1.01, SPL-1.40.0lipro.
Click to expand...
Click to collapse
What version of SPL do you currently have? You said initially that you upgraded to 2.10Oli, but then you say that your bootloader screen shows 1.40.oli. It looks like when you initially upgraded your HardSpl, it didnt work, because your BL is showing 1.4.
tim1234 said:
What is this thread about? I have the same phone but it does not have a radio.
What are you talking about?
Click to expand...
Click to collapse
Because I'm feeling sorry for you and for the edification of the innocent:
All phones have "radios" to transmit/receive signals over networks. This is not a radio in the commonly accepted sense of a device for listening to broadcast radio programmes. Hermes does not have as some phones have, an FM/AM radio built in.
Mike
I did the mar Vanxz updates, to the point where the radio update failed.
That left med with olipro 2.1.0
Then, after having tried several diferent hnhreads, I am at this point, having 1.40
Will it make any diference if I update with hardspl7 to 210 olipro again ?
Im not sure which radio you tried, but you should be able to get some answers here.
You can also use mtty to check your radio BL version here.
Hope that helps.
lets start from the beginning, update to HardSPL 7 (2.10.olipro)
Now when you try to install the radio update make sure you select SPL 2.10 and tick "is it hardspl?".
try that
Okay here we go:
I have done the HardSPL v7 to 2.10 Olipro again, no problems there.
I have previously tried 4 different versions of the radio only updates, with and without soft sspl, but none get past the 0% mark.
I just gave it another go, and still no luck.
Still stuck at 0%, and ends with "upgrade error 262"
I now have spl 2.10 Olipro, and no radio.
I have tried several times to get into radio comm mode with the mtty.exe tool, using the commands descibed at the link.
None work !
All radio comm commands result in a "command error!!!" response from the tool.
This is both using softspl bootloader mode, and the normal bootloader, and it includes the commands "rtask a" and "rtask b" all give error results.
I can do other commands without errors.
One interresting detail: when trying to update radio it says: "updating from image:3.29.707.4"
If I go to os sysinfo, there's no radio version listed at all.
microemission said:
Okay here we go:
I have done the HardSPL v7 to 2.10 Olipro again, no problems there.
I have previously tried 4 different versions of the radio only updates, with and without soft sspl, but none get past the 0% mark.
I just gave it another go, and still no luck.
Still stuck at 0%, and ends with "upgrade error 262"
I now have spl 2.10 Olipro, and no radio.
I have tried several times to get into radio comm mode with the mtty.exe tool, using the commands descibed at the link.
None work !
All radio comm commands result in a "command error!!!" response from the tool.
This is both using softspl bootloader mode, and the normal bootloader, and it includes the commands "rtask a" and "rtask b" all give error results.
I can do other commands without errors.
One interresting detail: when trying to update radio it says: "updating from image:3.29.707.4"
If I go to os sysinfo, there's no radio version listed at all.
Click to expand...
Click to collapse
Where did you download the radio from? Try one of these:
1.41.00.10
1.40.30.00
1.38.30.00
these have the RUU necessary to detect HardSPL v7 (if you followed the guide it does link to the top one of these).
Which radio is it you are trying??
Also when this error first began to occur was it AFTER or BEFORE you installed HardSPL?
I have tried al of those.
None work..
looks like abricked device then unfortunatly.
Did you run HardSPL before trying the radio upgrade?
Yes.
Do you mean that I have no options at all, to recover the radio ?
It doesnt sound good dude, refer to the unbricking thread as all cases of bricking should be reported there.
Okay - an expensive pda it is then.
Thank you all for your effort.
Well.. i have the same problem as u, except i can call people, just can't update the radio. I am using the X01HT White!
Hi
I've tried to flash my HD with a new ROM for the first time.
After spending time reading posts and WIKI I decided it is time to do it.
I've installed HARD_SPL by olinex and tried to flash duttey's.
after getting the tricolor screen the PC prog showing progress bar is on 0% and also on HD screen states 0%.
after 2-3 minutes it notifies on ERROR and sugest I would check USB connection.
I've tried it on difrent USB jacks (not a USB hub).
I've tried on diffrent computers.
I've tried diffrent ROMs (including L26 and Davidduek)
I've removed the memory card (as suggested on diffrent posts here)
I've tried flashing from memory card (as instructed on dutty's post)
Nothing worked.....always stuck on 0%. (luckely it does not effect the stock rom so I just restart and back to normal)
what should I do next????
My rom is 1.14.401.3 (22273)WWE
ROM date 10/24/08
Radio 1.09.25.14
Please help....
Have you successfully installed hard spl? on the tricolor screen what does it say? can you please write it here?
on the red bar
BLAC100 MFG 32M SS-BC
1.07.Olinex XA
MicroP-BlackStone (LED) v6
on the white bar
USB
I think you have installed another version of the Hard SPL.
Your mobile has to say on the red bar.
SPL 1.14 Olinex
Try this thread do everything again. and then try to flash another rom. Make sure it says 1.14 Olinex before flashing.
http://forum.xda-developers.com/showthread.php?t=431217
I know what your are doing wrong.
You are just using SSPL for flashing a rom. NEVER DO THAT.
MAKE SURE YOU FLASH THE WHOLE HARD SPL. COMPLETELY FOLLOW THE LINK THAT I HAVE SENT YOU.
OTHERWISE YOUR DEVICE WILL DIE(BRICK)
Thanks, I read the thread the 3rd time and succedd to update Olinex to 1.14.
I flashed duttey's ROM and I am playing with it right now.
If I want to flash onther rom do I just do what I did to dutteys or shpuld I install Olinex 1.14 again?
kubeb said:
Thanks, I read the thread the 3rd time and succedd to update Olinex to 1.14.
I flashed duttey's ROM and I am playing with it right now.
If I want to flash onther rom do I just do what I did to dutteys or shpuld I install Olinex 1.14 again?
Click to expand...
Click to collapse
there's no need to reinstall the hardspl
p3700
hy there i have the same problem with my p3700
i do the mtty method. and wype clean the device but the memo rom's ( I've tried std and GTX ) just wont pass the 0%... but the official diamond rom's work fine.. they will flash..
I'm truying to flash with the CostumRUU provided with the modem memo's.
and from the internal memory it won't pass from "Trigger USB Host..."
I'm searching for a solution on the forum. but so far nothing.
I'll truy to put a old orginall rom and try to run it ower with the memo.. I doubt that will help.
Thanx all.
kubeb said:
Thanks, I read the thread the 3rd time and succedd to update Olinex to 1.14.
I flashed duttey's ROM and I am playing with it right now.
If I want to flash onther rom do I just do what I did to dutteys or shpuld I install Olinex 1.14 again?
Click to expand...
Click to collapse
You need to be careful and make sure you are using the correct HSPL. If not you will have compatibility issues
If you want to change to a rom based on 1.56+ you'll need to flash HSPL 1.56
Likewise, if you want to use a rom based on 1.14 you'll need HSPL 1.14
But once you have HSPL you can easily swap between them
Rick
p.s. I've moved this thread to General Section as all Q&A should be posted there
Please help!
I don't restore original rom. I don't now why. The flash run only 44% and crash.
How can i restore original rom?
The 3LIT3 rom is cid locked?
Hello,
Just download the original rom WM 6.1 and install.
Follow this Step.
1. Download HTC Official Rom from http://www.htc.com/www/supportdownloadlist.aspx?p_id=59&act=sd&cat=all
2. Entering BootLoader - while holding "camera button", press reset. Do not release "camera button" until tricolor screen is shown
3. Run The application downloaded from step 1.
Next.Optional.
Aft this step you must make a Hard-Spl here yo will find File Hard-SPL-V2.zip http://forum.xda-developers.com/attachment.php?attachmentid=69875&d=1202629374
Aft Hard-Spl you can install any ROM build for Polaris.
I hope this will help you.
Well, i had similar problem.
Reflashing stoped on radio update - i think problem causes this unreleased 1.65.30.09 Polaris radio (don't remember exact error code i've got).
You will need to flash another radio - i used one of 1.59.....
Download HardSPL (there will be every thing you need to flash the radio), copy radio file into same directory, and run RUU (RomUpdateUtility).
strucon said:
Me too, with all ROM 3.XXXX ROMs:
RUU_Polaris_HTC_WWE_3.13.405.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
RUU_Polaris_HTC_Asia_WWE_3.18.457.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
But I installed with success the 1st Polaris rom:
RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
You can download from the XDA ftp or from this:
http://forum.xda-developers.com/showthread.php?t=373233
After this I can install any official/nonofficial or the 3LIT3 VI Suite rom.
I don’t know why, or this is normal thing or not, maybe Chavonbravo can answer to this.
Click to expand...
Click to collapse
It works for me.
I had the same problem. I downgrade the radio version to 1.59.44.02 and then installed the rom I wanted to rollback.
Hi there I am have a similar problem.
Mobile is O2 Orbit II (Polaris)
I Have installed Hard-SPL-V2 and 3LIT3 VI. All worked fine.
I have now tried to install the official WM6.1 rom(both O2 HTC version)and having problems. The install gets to about 34% and shows error [262] : update error
I dont have any sdcard in the device and i have dissable my firewall/antivirus
I have been able to reinstall 3LIT3 no problem so looks like installing the official roms is a problem.
I have follow the steps iby bunex but no luck.
what am i doing wrong?. I have checked to confirm that Hard-SPL-V2 is still installed
amitco said:
I had the same problem. I downgrade the radio version to 1.59.44.02 and then installed the rom I wanted to rollback.
Click to expand...
Click to collapse
are you saying that i need to downgrade the radio to 1.59.xx.xx in order to load back the official roms?
cheers
cooa99
cooa99 said:
Hi there I am have a similar problem.
Mobile is O2 Orbit II (Polaris)
I Have installed Hard-SPL-V2 and 3LIT3 VI. All worked fine.
I have now tried to install the official WM6.1 rom(both O2 HTC version)and...
cooa99
Click to expand...
Click to collapse
You have install 6.0 official rom first.
Maybe it work.
Ok posts above (silly me did not read well) suggest i av to downgrade my radion to a 1.59...... for me to be able to then apply the official roms.
So I downloaded Official Radio 1.59.42.15
Stuck it the my sdcard and then tried to do a radio change via the sdcard install method
No luck The radio downgrade fails with the following error :-
00018003
POLAIMG.nbh - FAIL
RADIO_V2- RSA FAIL
UPDATE FAIL
update
i have succesfully restore the 3lit3 rom again, so still dont know why radio update is failing
coould this be due to download of the radio file via the phone?
cooa99 said:
Hi there I am have a similar problem.
Mobile is O2 Orbit II (Polaris)
I Have installed Hard-SPL-V2 and 3LIT3 VI. All worked fine.
I have now tried to install the official WM6.1 rom(both O2 HTC version)and having problems. The install gets to about 34% and shows error [262] : update error
I dont have any sdcard in the device and i have dissable my firewall/antivirus
I have been able to reinstall 3LIT3 no problem so looks like installing the official roms is a problem.
I have follow the steps iby bunex but no luck.
what am i doing wrong?. I have checked to confirm that Hard-SPL-V2 is still installed
are you saying that i need to downgrade the radio to 1.59.xx.xx in order to load back the official roms?
cheers
cooa99
Click to expand...
Click to collapse
I rolled back to UDK8 rom but only after I downgrade the radio to version 1.59.44.02 - current official version.
It seems that there is a problem with 3LIT3 rom and radio version.
If you still have problems try to contact chavonbravo.
Maybe he can help.
cooa99 said:
Ok posts above (silly me did not read well) suggest i av to downgrade my radion to a 1.59...... for me to be able to then apply the official roms.
So I downloaded Official Radio 1.59.42.15
Stuck it the my sdcard and then tried to do a radio change via the sdcard install method
No luck The radio downgrade fails with the following error :-
00018003
POLAIMG.nbh - FAIL
RADIO_V2- RSA FAIL
UPDATE FAIL
update
i have succesfully restore the 3lit3 rom again, so still dont know why radio update is failing
coould this be due to download of the radio file via the phone?
Click to expand...
Click to collapse
I have written a small instruction in my previous post. Use RUU utility, don't use SD card method.
Leryan said:
I have written a small instruction in my previous post. Use RUU utility, don't use SD card method.
Click to expand...
Click to collapse
Thanks guys,
i was able to follow the instructions in the 3LIT3 thread and reflash radio and old rom to remote 3lit3..
So all is good!
cooa99 said:
Thanks guys,
i was able to follow the instructions in the 3LIT3 thread and reflash radio and old rom to remote 3lit3..
So all is good!
Click to expand...
Click to collapse
In order not to check all the thread to find it ... can u link it or just tell us at what page is the post with the instruction please
This will be usefull for all the people that want to come back to the original rom like u
Thanks, ciao ciao
It was working and then all of a sudden I could not get a data connection..after a soft reset I could not get the phone out of flight mode..it would turn on wifi and blutooth but not data or phone radio. It acted like it could not read the SIM card. I could not even pull up my contacts list stored on the SIM card. I put the SIM in another phone and everything works.
I had no event that would have damaged the phone (drop etc..) so is it possible its a software issue? I did reflash a few ROM's but none would get it to work.
Has anyone had this happen to them? should I try to take the phone apart?
I love this phone
trying to reflash radio rom
OK I got an idea to try and reflash the radio ROM (1.58) in hopes that it would clear up my issue. I'm having a problem with this ..it will hang at the 0% progress (shown on the computer and the phone) and after a time error out. I then have to reflash the OS ROM and start all over...I have done this a few time with that same result. I even tried to use the older 1.57 radio ROM with the same results.
Anyone have any ideas on how i can get the radio flash to work?
Update
it seems like any flashing that tries to acces the radio portion of the ROM will not work..I get a error code 262 - loss of communication every time i try and flash any radio rom, I even tried to run the unlocker because one of the steps is to patch the radio rom ..but still get the same error..only this time it will go all the way to 99% bfr i get the error.
After all that I still have to reflash a OS ROM (currently 6.1 RO one) and everything still works great except for I cant turn on my radio for the phone and data.
Anyone have any idea how i can overcome this?
One idea i had was to roll back to the spl 1.2 ROM's but wanted to get some feedback bfr I do that..if it would even be worth trying.
thanks
Update 2
I decided to try and run the SPL downgrader. I flashed the ROM to prep ..all went OK ..then tried to run the SPLDowngrader.exe and when it got to the point where i see the progress in % it said:
Found SPL v1.20
Download SPL before v3.03
is not allowed!
Now I dont know what to do..please any help from anyone??
I was running the 3.5 SPL 6.1 RO ROM ..and never downgraded til now. Wes it because i was trying to run the unlocker earlier that may have messed something up?
Right now when i put it in boot loader (no choice its just that way after my failed attempt to downgrade) it shows:
ATHE100
IPL-v2.02
ATHE100 MFG
SPL-v3.50. OliNex
I may be able to reflash a 3.50 SPL ROM and get it back up and running but want to hold off to see if anyone knows more about how to fix it.
rpmbnsf said:
I decided to try and run the SPL downgrader. I flashed the ROM to prep ..all went OK ..then tried to run the SPLDowngrader.exe and when it got to the point where i see the progress in % it said:
Found SPL v1.20
Download SPL before v3.03
is not allowed!
Now I dont know what to do..please any help from anyone??
I was running the 3.5 SPL 6.1 RO ROM ..and never downgraded til now. Wes it because i was trying to run the unlocker earlier that may have messed something up?
Right now when i put it in boot loader (no choice its just that way after my failed attempt to downgrade) it shows:
ATHE100
IPL-v2.02
ATHE100 MFG
SPL-v3.50. OliNex
I may be able to reflash a 3.50 SPL ROM and get it back up and running but want to hold off to see if anyone knows more about how to fix it.
Click to expand...
Click to collapse
Hi, sorry to hear of your problem
have you tried flashing radio 1.57 from sd card?
after this I would try flashing a 3.5 rom
Good luck
Thanks for the suggestion
I tried that and it started OK and even tried to load ..the progress bar showed about 1/8th of it loaded then it just stops...the phone stays that way saying "In Progress.." but will not load any more. I pulled out the battery and put on a 3.5 ROM to flash from the SD card..it works no problem..I even can flash a 1.2 ROM for some reason and it works no problem...but I cant flash the radio ROM (tried 1.58 and 1.57) they will start and load only a little way then just stop.
Anyone have any other ideas? Is there a way to run the unlocker from the SD card? I feel like i'm getting further using that approach than with activesync.
Thanks for the help so far!
rpmbnsf said:
I tried that and it started OK and even tried to load ..the progress bar showed about 1/8th of it loaded then it just stops...the phone stays that way saying "In Progress.." but will not load any more. I pulled out the battery and put on a 3.5 ROM to flash from the SD card..it works no problem..I even can flash a 1.2 ROM for some reason and it works no problem...but I cant flash the radio ROM (tried 1.58 and 1.57) they will start and load only a little way then just stop.
Anyone have any other ideas? Is there a way to run the unlocker from the SD card? I feel like i'm getting further using that approach than with activesync.
Thanks for the help so far!
Click to expand...
Click to collapse
Try flashing taxists rom
http://forum.xda-developers.com/showthread.php?t=396165
this has radio 1.58 included so may be an upgrade path for you
Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC (i found several threads dealing with this problem, but most of the people had written there ROM, RADIO, .. in the left corner - I dont have this written) So I tried to flash the phone from the SD with stock rom, nothing has changed, I tried taking out the sd & sim card. I tried hardresetting device few times and I got no more ideas.
Do you have any ideas?
Thanks in advance!!!
Filip
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Edit 2: For now I have HSPL in the phone.
sounds like a missmatched rom and radio. once they are both flashed correctly it will boot. (example, a rom based on 2.10 rom will require a radio of around 2.06 or better to boot.)
edit - just seen you flashed with a stock rom from sd card, can you boot to bootloader? (press and hold vol down, tap power on)
dont worry about
In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
for now
Felipe404 said:
Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC ...
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
I had exactly the same problem several days ago. After exchanging several ROMs, I got stuck at very first white screen with a green banner, but before it even showed the ROM and radio versions on it. And it happen after the ROM flush finished successfully. I also tried to hard reset it a couple of times.
But after that I used a gold card with 1.61 WWE ROM on it that I still have from the time when the HSPL wasn't developed yet.
During the flash from the gold card it waited at first and shown a some kind of error or warning grey exclamation sigh in a triangle, but just for a split second. After that it returned to continue flushing. I think it took twice as long as it should be, but as it finished, I was able to boot, hard reset and re-flash to the stock ROM 1.66 WWE, the usual way through the USB cable.
samsamuel: I can get with no problem to bootloader, could you send me exact link of the rom and radio that work together? And how come, that everytime I connect the phone to charger, it starts up?
mikiort: I havent ever used goldcard, havent ever heard of it better to say..
thanks for your help, guys, really appreciate it!!!
Since you have HSPL stil on your phone
(SPL 1.42.HSPL and not 1.42.0000) you are happy. Flash a stock rom from USB, lets say a 1.66 wwe rom, and if it still wont boot, go to teh radio roms thread, pick a low radio, (the 1.61 for instance) flash that, and you should have a working phone.
yeah, right now im flashin 1.66 WWE but it stopped and 99%... waaa im gettin nervous ok i will try and let you know
Ok, flashed 1.66 WWE but nothing has changed, im about to flash radio.
Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?
Felipe404 said:
Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?
Click to expand...
Click to collapse
hmm, sorry to hear that. i'd maybe consider flashing stock from sd card, but you need to be sure you have teh correct stock rom for your phone provider and region.
Be warned, this will remove HSPL, if you do not have the correct stock rom, it wont work.
Yea, i did that once already with 1.48 WWE Eastern Europe, it worked (it didnt show the triangle sign) but it didnt help, now im trying to flash 1.43 but im not expecting anything good
Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...
Felipe404 said:
Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...
Click to expand...
Click to collapse
Ok, if you have 1.42.0000 you need to redo the hspl flash. Once the spl is 1.42.hspl you can then flash to the rom of your choice. Which rom were you trying?
Many of the new roms require you to flash to a new radio at least 2.06 and most recently to 2.08 PRIOR to flashing the rom and if you don't the rom does not boot up and gets stuck on the white HTC screen.
really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...
Felipe404 said:
really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...
Click to expand...
Click to collapse
For these newer roms you need to flash the radio first and then the rom, otherwise the rom doesn't boot up and gets stuck on the white screen.
If you are flashing a newer ROM based on the new TMOUS ROM I would flash the 2.08.50.08.03 Radio, then the ROM. Make sure you have HSPL 1.42 first.
Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..
Felipe404 said:
(option in communications couldnt be turned on/off was grey)
Click to expand...
Click to collapse
thats usually means you have the phone on usb connected to the computer.
Felipe404 said:
Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..
Click to expand...
Click to collapse
I'm currently using the latest NRG rom (link in my signature) with the 2.08.50.08 radio and that works. Just as I said, flash the radio first and then the rom. The Dutty rom should also work the same way though so the choice is still yours.
OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?
Felipe404 said:
OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?
Click to expand...
Click to collapse
What did you do to flash the radio? Please explain how you did it.