Related
Alright so I had a working Mobile 6 ROM on my HTC 8125 it was the Touch ROM, so I tried doing a hard reset one day by pressing the send key to format and it says formatting then FAT Format Failed or what not.
So I reflashed it with a different ROM as the Touch one wouldn't work anymore saying I needed a newer Touch ROM to flash it to my phone. It's running IPL 3.08 and 3.08 SPL not sure if that means I have to downgrade back to 2.x IPL/SPL. However so I got a new ROM flashed to it and it just sits at the booting screen for that ROM even though it successfully flashed. So once again I try the format and it says failed again.
What exactly are you asking for?
I've flashed my tmobile MDA a few times, but i'm no expert.. From what i've read, I believe the SPL/IPL version has to be specific for each ROM. The older one's have to start from scratch at 1.0x SPL/IPL, while the WM6 ROMs seem to be using the 2.0x version IPL/SPL.
What I'm trying to figure out is why it wont flash it's a unlocked phone and it says it flashes just fine goes to 100% reboots and gets stuck at the IPL/SPL OS Screen then if I do the voice dial / other button where it says press send to reset it says FAT Format Failed so I assume the WM6 isn't working right ive tried a few different ones too.
what I suggest is reflashing to your original wm5 rom, and moving on from there
Do you have a Link it's the Cingular 8125 HTC
Anyone? I've tried searching for the original ROM but cant find it.
So am I to understand no one has any clue where to get the original ROM? I've seen it on here before but the search feature is quite useless.
How about going to the source??
newbie2 said:
How about going to the source??
Click to expand...
Click to collapse
Hmm well that was too convinent didn't think of that. Now to hopefully see if that works. If not anyone have sugestions on what would cause this? The device is completely unlocked. Pretty much what happens is no matter what ROM it is, it gets stuck at the IPL / SPL / OS Screen and doesn't go any further. But I'm still waiting on the origional ROM download which is going slow as hell. So hopefully that will do it.
---------------
Origional ROMS now on it
IPL 2.25
SPL 2.25
GSM 02.25.11
OS 2.25.11.1
Cingular Screen still sits there and doesn't load, freaking crappy ass Windows product just another reason why I got a different phone.
I faced similar problem ("Format is failed") this morning:
http://forum.xda-developers.com/showthread.php?t=305453&page=3
After searching with the key words on the forum I found this very helpful to me:
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
Cheers!
Just my luck I left my SD card for the phone at work (which I won't be back at for 3 weeks) bah.
my friend owns an 8525 and all of a sudden it stopped working (cant make/recieve calls and text messages). i tried doing a hard reset and it didnt work. he called att and the tech guy told him that his phone needs to reinstall the rom, which also didnt work. he bought a new phone and gave me the hermes so that i can play around with it. i tried installing wm6 on it and at 15% the update stopped.. and the phone reset itself. now.. it doesnt have a rom installed and keeps on going to the tricolor screen. i tried the unbrick method (in the wiki) several times and still no luck. it keeps telling me that i dont have enough ram but the booting still wont start. what are my other options for fixing this?... my kaiser was bricked before and i did the unbrick method for that and it work.. i havent tried that yet but is there any chance that it will work..?..
he doesnt need the phone anymore but hes hoping that itll be fixed so he can use it as a backup phone.. so.. yea.. any other ideas for ressurecting an old friend?
thanks!!
Sounds like the radio rom is dead.... Whats the SPL? You have a chance if it has Hard SPL installed - should say SPL - 2.10 olipro.
If so, try flashing a stock rom first, then a radio only rom. If you get no love, flash a cooked rom on it. I'd do it using the sd card method.
It should work as a PDA if you can't flash the radio, but its a brick cos no more phone calls...
If he doesn't want that, he could sell it on ebay for spare parts...
Cheers...
I just went through a similar situation last night. I am running dvh_79's v16 (build 19965.1.2.3) Lite. I added his HTC Today Plugin from the sdauto zip file but didn't like how the Today plugin slowed down my phone, so I uninstalled it and that's when my radio took a dump.
I used the instructions in the Hard SPL forum post #116 to unbrick it using the same rom and radio .nbh files and it went off without a hitch.
The first thing anyone should flash onto their phone is Hard SPL v7. Even before any skins. It won't make you 100% safe from bricks, but I'm damn glad I had it on there this morning while I was reinstalling my phone.
BTW ultramag69, I saw a lot of posts by you in various threads talking about unbricking a phone, and correct me if I am wrong, but if I have olipro 2.10 SPL on my phone (which I do), is it possible to initiate an install of a ROM image without being able to successfully boot the OS on the phone? Does Olipro automatically look for HERMIMG.nbh on the SD card? That was a point of confusion for me at first until I ran the HARDSPPL.exe file, but then again my phone didn't brick to the point I couldn't boot the OS.
What are the choices if you cannot boot OS? Are there any that can be performed from the bootloader itself?
Thanks.
well.. i did the kaiser unbrick procedure.. the mtty thingy.. it kinda worked. after that i installed the dopod wm6 rom... it handled the wm6 well---for a while.. after booting, the phone would turn off by itself (w/ 100% battery of course) or even restart itself..
sometimes it will stay on and be "fully functional" (w/o the calling and messaging still...) but somehow freezes when i look at the device information, specifically in the page where it displays the imei (which is missing btw...)..
the "phone" function doesnt work either, as it doesnt show the dialer.. and then after a few minutes, the phone finally freezes...
idk why this happens.. i tried installing other roms but the rom update always freezes. i tried 4 different roms already... so i had to do the mtty thing again...
(i have hardspl installed)
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
akosiryan, it sounds like you may have a corrupted radio rom. This is not gonna make you happy but this is ,at this point, almost 100% unbrickable. You could try to flash a radio only rom - no os, just the radio - but if it gets stuck and you've tried the stock rom then it looks like its a permanent brick...
You should be able to use as a PDA if you don't play with the phone functions though...
Just as a last shot, you could always use MTTY to check for bad blocks BUT this requires you to downgrade the SPL to 1.10 olipro to fix if you do. Please note though that sometimes the carrier does give you a couple of bad blocks to "brand" it as theirs...
Best of luck.
ultramag69 said:
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
Click to expand...
Click to collapse
Thanks ultramag69! I am indeed running olipro 2.10 on my phone so it makes me feel better knowing that if I can get the nbh on the card, then I can flash the ROM that way.
oh well.. me and my friend decided to sell his phone on ebay or sumthin..lol.. so its not a problem.. ill try to do one last step tho.. like flashing the radio only rom to see if itll work.. but i dont really care anymore.. lol.
No problem... If the Ebay from where you're from is like Aussie ebay, you should get approximately 1/2 to 2/3 the price that the working models go for. Generally the price goes up about 6 hours before the end of the auction with the price skyroketing in the last 10 mins... I'd probably give it a few days on Ebay to make sure people see it....
If you do get the radio rom working, Hermes (jasjam/dopod 838 pro) go for about $250 - $350Aud in Oz.
Cheers...
ok then! thanks
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
the problem appears to be that you have slightly different hardware to every one else.
didnt realise you were having issues with sspl, that at least should work ok. by time out do you mean there sspl boot screen appears burt nothing else?
if so what happens if you disconnect the usb cable and plug it back in?
if it changes to usb then rerun the sspl without changing anything on the hd2
you could also try - and uninstall the windows drivers for the qualcomm cdma drivers or whatever they are called on you pc. and reconnect in boot loader to let them reinstall.
SSPL used to work, it stopped working after I flashed a newer rom to play with. When I use the SSPL it goes into the bootloader screen just fine, then I hear the USB disconnect sound and the SSPL program times out quickly with the exit button citing no connection.
I have 2 x Windows 7 64 bit computers, 1 x Windows 7 32 bit and one XP 32 bit computer. I get the same results on any of them. All after the most recent ROM upgrade.
I have not tried running SSPL from boot loader screen, did not know that was possible. Trying that now. Just need to download a known working ROM.
If that works I'll be back in the same boat as before, stuck with 2.0 SPL and 2.06 radio. I want that SPL 2.0 off my phone badly.
OK, trying SSPL from the bootloader screen got me a little further towards ROM flashing. I can see the htc on the black screen with the progress bar. It now sits at 0% with no movement indefinitely.
Going to try another ROM and see if I can get the ROM installation to actually begin.
If you still haven't tried it do this: start SSPL when you hear the USB disconnect sound remove the USB cable (either from device or PC) and then connect it again! this should allow the SSPL to enter USB mode! I've had similar problems long ago and this trick was doing the job! Not sure that it will help you but just a thought!
Newb here:
I had something similar. I installed HSPL and everything was fine thereafter. The radio wouldn't flash any other way, in fact it would disconnect like you said, or if I manualy took the phone to boot loader, it would stick at 0%.
There is a HSPL thread stickied in the ROM section and I believe it explains how to remove it if you need to "re" validate your warranty. Although reading once more it does say you need SPL 1.42 to get it to install.
Have you tried installing an official HTC ROM downlaoded from their site? This will take you back to the original SPL version 1.42...
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Have you tried to hard spl it? If I missed it in your post, I apologize.
Not in a long while, I should try again I guess but I was totally under the impression that HSPL will error all the time unless you have SPL 1.42 installed on the phone.
Edit: Just tried and it errors because SPL 1.42 is not on the phone, it's the only SPL that HSPL works on as far as I know.
balane have you tried installing a stock rom from your SD card? this would revert the spl back to 1.42 and allow you to then flash HSPL (I think, almost certain) but you said you cant do anything with the sd card, have you tried that? have you tried with different SD cards? also have you made sure that it is formatted to FAT32?
Another thing you could try if all else fails: MTTY, look at the MTTY thread by MystikGenius, its stickied in the rom development section, this will format your phone from which you can then try to flash from usb or sd. I would recomend trying to flash from SD which then again may revert your spl.
Im going to school now so I wont be able to help you anymore 8 or so hours, but PM me later if your still stuck.
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Yes, I've tried dozens of stock roms from the sdcard, every one I could find in fact and they all hang at the Loading... screen. As stated in the op, I used two different cards both formatted to fat32. I guess I could try a third card, not sure if it's worth a try or not.
I looked at MTTY but that doesn't do a thing with SPL and my SPL is the root of my issues.
Update: I finally did find a ROM I could get flashed via SSPL. It took like 3 tries to get the progress bar going but it did get installed. I can't even recall what series of events got it to go but at least my phone turns on and works.
Still the same SPL and radio though. No change there.
bobsbbq said:
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Click to expand...
Click to collapse
I could have swore I read some people who were able to get the SPL 2.0 off their phones but I could be mistaken. I'm actually ok with any SPL as long as I can sspl different ROMs. I just want to get the radio current so I can run the latest TmoUS ROM, I would totally and 100% pleased with being able to update the radio. I have found now way to flash a more current radio.
balane said:
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
Click to expand...
Click to collapse
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
balane said:
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Click to expand...
Click to collapse
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Otherwise, pester bepe for when the HSPL comes out that is compatible ywith SPL 2!
ancola66 said:
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
Click to expand...
Click to collapse
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
mwillems2 said:
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Click to expand...
Click to collapse
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
balane said:
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
Click to expand...
Click to collapse
YES ! You can use any Goldcard. I write instructions for you but my very bad English
balane said:
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
Click to expand...
Click to collapse
When you say oem, do you mean just the nbh with which you have tried to install using tools or the self extracting exe that HTC provide? I'm just asking cos to me, oem means it comes without all the manufacturers extras.
I've always been under the impression that the only way to downgrade an SPL was to install a complete OEM package ROM/Splash/Radio/SPL as a LEOIMG.nbh from the root of the SD card. I've tried dozens of these both from US based ROMs and abroad. None of gone past the Loading.... screen. I've tried 1.42 and above ROMs, no luck with any.
Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.
I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash
Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.
try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !
So there is no fix i can do at home like flashing a specific rom or something else?
if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?
nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!
You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)
how about hardware reset with pressing 3 keys at the same time?
Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck
I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?