Related
Hello everyone! I have problem with my phone because sometimes is turning off without any reason, I bought brand new battery and is still same when is switched off and I want to put it back on i must take off battery for couple of minutes, then put battery back and then switch on anybody know whats happened?? And how to fix it!!
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Thanks for reply!
Uff.... first way to fix it is a little bit too expensive! And 2 way to do it seems quite easy, so i try to do it this way Could you add any picture of this and just tell me how to open this phone?
Many thanks!
@Firestarter42
Thanks man!!!!
did what you said, the plastic trik, and the phone is back to life (it was totally dead and didn't charge) you save a life today!!!
I had the same problem untill one day when he didn`t want to turn on and now i do not know what to do with it how to make it work again
Dear Sir,
I have just tried method 2.
My elf didnt have a metal cover on the processor, lol... got it used from someone... or should I say abused? lol
anyway, I hope it works. will update...
here's a link for the demonstrated tutorial:
http://forum.xda-developers.com/showthread.php?t=476152
Thanks a lot again.
I haved the same problem.....and i realize after many times that I didn't change my ipl and uspl!!!so my cocked rom frequentely turn off my device!!!now it's all right!!!!!!!
i had the same problm too....
it kept turning off and just a few weeks ago it would never turn on...
i did try that trick of keeping the plastic thingy on the omap processor ... it worked for a few weeks max after tht it happened as above
finally took my phone to htc.. told them it was gift and i dont have the invoice... actually purchased frm ebay for 150$ .....
they checked it was in warranty,.. they replaced the board... hurray... my elfin is alive again.. and in wm6.1
hope htc fixes this crap issue as many face this problem
My HTC elf was freezing, rbooting and so on, i was thinking that it was a windows/flash/third party programs problems ....
BUT I confirm that the method "open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it"
brings my htc elf to life again ... stable !
(i've done it with a metal piece and not plastic.)
Thanks for the advice !!!!
my elf was freezing and turning off so i try this 2. method and it works, and elf is much faster then before in my case...
I've never had this problem before but this week my phone switched itself off (so had to boot up again) a couple of times. I did try a new custom rom but I've also been using a different charger (USB mains adaptor) and a replacement battery (this seems to be a poor replacement battery which seems to make up the battery level.
So I don't know what was causing it. For some reason, removing the SD card and re-inserting it seems to have done the trick for now but I'll keep watching it.
Hi guys
My phone is, usually at night when there is no use, switching the screen off, the earphone green indicator flashes but the phone will not turn on when I press the power button, I have to do a soft reset each time to get it back on again (even though it appears to be on with the flashing green light). I cannot get calls or text and my alarm fails to sound. Have overslept a few times now!. Also, its battery has gone for a ball of ^&*%. Will this trick help? Thanks a lot!
Turn off as in literally 'poof!' or, it will restart?
The only way to get it to restart is to do a soft reset, or remove and replace the battery. The phone's green light will flash but there is no way to the screen to activate or use the phone - make calls, use the alarm, receive etc. The screen stays black, no use trying the power button either...
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
Thankx your solutions worked out with my HTC Touch and i get replaced omap processor
power problem on Elf (not the usual)
hello guys, i have an Elf T-mobile that someone "lost" i found it, but was bricked...i unbricked following the awesome guides on the forum and installed on it the original italian rom (obviously am not german)
but...here's the problem, when i press the power button (should get it into stand by mode like every pda does) or also when goes on stand by itself, just shuts down !!!
then the pda auto soft resets, until the end...doesn't have the "auto power off problem" like i readed on the forums...however it tried but didn't solve the problem
i think is a problem with the radio, or the IPL or SPL (i tried 1.11.0002 IPL and 1.11.000 SPL...then 2.2x.xxxx IPL and SPL...now i tried 3.14.0002 IPL and 3.14.0000 SPL, also tried different radios...
but the problem remains...
EDIT: Problem solved, changed the little battery in the motherborad, it worked for me
help
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
can any one provide some sought of tutorial for this please
thanks
ishaan_chd88 said:
can any one provide some sought of tutorial for this please
thanks
Click to expand...
Click to collapse
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
captainstu72 said:
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
Click to expand...
Click to collapse
thanks man but i guess am so dumb that am not getting where is this processor located anyways currently my phone is working fine but in few days I'll get the tools & open it...let see than
if you can arrange any pic of processor(where we have to fit plastic) it will be extremely helpful...
anyways thanks for helping
tc
where to get small battery on mother board
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
well, my htc touch a while developed this look in certain lighting conditions with the screen backlight off that can only be described as looking like a opilspill, and i thought it might of been the touchscreen layers seperating, but untill just now it still worked fine so i wasnt too bothered, was working great one miniute and the next miniute i went to send a text and the touchscreen wasent responding. i tried a hard and soft reset , nothing and right now im extremly pi**ed off as i loved that phone and havent really got the cash for another one .
my question is what is the lightlyhood that the only thing gone is the digitiser, and has anyone used any of them dodgey chinese sellers on ebay as thats the only place i can fine them i dont wanna be leaving XDA developers so early
any advice will be aprieciated, feel like a famy pet jus died or summan
EDIT: dont think its relevent but im using the blue elves rom v6 i think
well you can try mymobiler and use your pc to try and correct any issues
i think the issue might be hardware as i have done a hard reset, did try using mymobiler just to use the phone after i had hard reset, but its either a bug or the way that the touchpads calibrated that i cant now after a hard reset.
what happens is the inital tap the screen to setup, that works, but mymobiler wont allow me to to the screen taps to calibrate.
Back to the box than till i can find a faulty one on ebay in the uk
Find another faulty one of eBay? Why not send it in to HTC and make use of their manufacturer warranty, hopefully its still covered. But worth a shot.
am going to do just that. it was definatly the digitiser have managed to get tho old digitiser working in a strange way, just pressure over time, am posting on it now, but its gonna need replacing but at least I got my phone back thanks everybody
what you are describing is newton rings
Beware of HTC's large screen phones.
Any force applied to them, even taking off a screen protector, is enough to produce "newton rings" and the screen stops responding to touch.
Not much use for a touch screen phone.
HTC refuse to cover this by warranty and refuse to negotiate. expect to shell out up to $500 to repair it. With no guarantee that the next screen won't do the same thing.
Design or Materials fault but they won't cover it by warranty.
well at least i know what caused it, sorted it a while back by replacing the digitsier myself. ended up getting it from the chinese ebay seller. before that i took out the digitiser, applied weight to the top and froze it lol, it worked but i replaced the digitiser anyway.
thanks for all your replys
Hey guys! I have searched the forums and haven't found a problem quite like this yet. Recently, I got some water on my phone, but was able to wipe it off, and it worked fine, and the water damage indicators on the phone are still white. During that day though, after rebooting the phone, the screen appeared to not turn on, so i thought it WAS water related damage, of course.
I put the phone in rice for a few days, and NOTHING, till one day i looked at the phones screen under intense light.
The phone vibrates after you power it on, but then that's all you get, but upon further inspection under a bright light you can see the MAGLDR boot screen come up, and load all the way to the GO GO GO part, then it freezes and stops.
The screen is still black, and there's no light at all, you have to hold it DIRECTLY under bright light to see it.
I am ..or was...running the android NexusHD2 gingerbread 2.2 NAND (2.3.2) rom with MAGLDR 1.12 installed.
I can get into the boot menu, and all the hard buttons work. I can even play tetris, when i can see it. >.>
The MAGLDR seems to work fine, the android doesnt work, or load anyway.. I an go into USB flasher, option 5 on the boot menu, and reload android, but it does not resolve the problem.
Any suggestions oh wise XDA members?
I am not an expert when it comes to the hardware side of tbe HD2, bjt I am learning. It kinda sounds like you may have got some water inside the unit either through the speaker opening t the top of the front of the phone or in around the small openimgs around the buttons at the bottom of the front of the phone. My bet is it was the buttons cuase this is close to the digitizer. And it sort of sounds like the digitizer is malfuncting.
Seeing as you have tried reflashing the ROM the only real sugestion I got is maybe get you a small hex head screwdriver and open up your HD2. Take the mainboard out and the digitizer out and very lightly use a hair dryer on the low setting to try and dry them out. make sure to bold the dryer a good distance from them cause you do not want to get them hot just dry them out.
Now you still have a waranty I would just do a warranty exchange or have them repair it. If you don't have a warranty and don't want to try this I do not blame you. It is just the only idea I have. You can always find a cell phone repair shop and have them do it.
Best of luck.
This happened to me too. My HD2 was completely submerged, but luckily for me I had the torx needed to immediately open it up. I didn't use a dryer, but I did towel it off. Then I just left it off and apart for 5 days before I actually put in the battery and turned it on. I did have to replace the screen because it cracked to hell, but my main concern was knowing that it would still function. Good Luck.
Okay, I contacted HTC today after reinstalling winmo 6.5 stock for the HD2, A guy named bob told me I could send it in and have it repaired covered by HTC. My guess is that because the water damage indicators are white, they shouldn't void me, right?
I am guessing it IS the digitizer because of the following reasons.
Winmo works fine, though the sim card will need to be replaced, which is no problem. the touch screen does not function and the screen is still black and wont light up, but winmo boots successfully, like I said, viewing under bright light.
I think I am going to try and send it to HTC, if they say its void, then I am going to try repairing the digitizer, as the tmo digitizers are readily available now. Before that though, I will try your suggestion T-Macgnolia.
I'll post my results soon!
Hello.
I have a galaxy s5 with water damage, the screen doesnt work at all, its completly black no sign of at least a blinking once in a while on the screen, but the phone Works normally, when i turn it on u can hear the sound and vibration, also i tested with sim card and i can even receive calls, so everything is working as it should except the screen.
My question is, if i buy an lcd screen+digitizer to replace the current faulty one, will this work?I try to be sure if this will work cuz i dont want to spend on buying a new lcd screen and then see that this didnt worked.
I have already opened the phone to check the current's lcd status, which is kinda really bad from the water dmg, but the rest looks ok.
Any Info on this would be really helpful
Try Vysor it's a Chrome extension to handle your phone in your pc.
Since you are able to watch your phone screen on your pc that should give an idea about the damage and if it's worth fixing or not.
What happen anyway? I just recently bought S5 coz of water resistant feature.
You could try diagnostic software, or have in-built Samsung *#0*# to assest your hardware, but you need to connect and mirror your S5 to TV or by other means for you to see your S5 display.
Chym3ra said:
Try Vysor it's a Chrome extension to handle your phone in your pc.
Since you are able to watch your phone screen on your pc that should give an idea about the damage and if it's worth fixing or not.
Click to expand...
Click to collapse
Thx for your asnwer on this, unfortunalety this extension requires USB debugging enabled, which i dont have it enabled. Honestly i didnt knew about this extension so thank you for sharing this.
The phone just dropped into the water and stayed for 1-2 seconds before i took it out right away, but as many others got confused about this, there is a difference between water resistant and water proof, its a big mislead from samsung advertising this phone as "its able to stay in water up to 1 meter for 30 minutes". thats what confused many and they damaged their phones. On my part i didnt wanted to test it at all, it was an accident :/. But seems i might be able to make it work again with a NEW lcd, i just wanted to be sure before buying the lcd.
I was swimming with my phone, taking pictures underwater during summer and it's still fine today. And there's whole bunch of videos on YouTube prooving that as well.
Try to send it to repair if you still got warranty.