well, my htc touch a while developed this look in certain lighting conditions with the screen backlight off that can only be described as looking like a opilspill, and i thought it might of been the touchscreen layers seperating, but untill just now it still worked fine so i wasnt too bothered, was working great one miniute and the next miniute i went to send a text and the touchscreen wasent responding. i tried a hard and soft reset , nothing and right now im extremly pi**ed off as i loved that phone and havent really got the cash for another one .
my question is what is the lightlyhood that the only thing gone is the digitiser, and has anyone used any of them dodgey chinese sellers on ebay as thats the only place i can fine them i dont wanna be leaving XDA developers so early
any advice will be aprieciated, feel like a famy pet jus died or summan
EDIT: dont think its relevent but im using the blue elves rom v6 i think
well you can try mymobiler and use your pc to try and correct any issues
i think the issue might be hardware as i have done a hard reset, did try using mymobiler just to use the phone after i had hard reset, but its either a bug or the way that the touchpads calibrated that i cant now after a hard reset.
what happens is the inital tap the screen to setup, that works, but mymobiler wont allow me to to the screen taps to calibrate.
Back to the box than till i can find a faulty one on ebay in the uk
Find another faulty one of eBay? Why not send it in to HTC and make use of their manufacturer warranty, hopefully its still covered. But worth a shot.
am going to do just that. it was definatly the digitiser have managed to get tho old digitiser working in a strange way, just pressure over time, am posting on it now, but its gonna need replacing but at least I got my phone back thanks everybody
what you are describing is newton rings
Beware of HTC's large screen phones.
Any force applied to them, even taking off a screen protector, is enough to produce "newton rings" and the screen stops responding to touch.
Not much use for a touch screen phone.
HTC refuse to cover this by warranty and refuse to negotiate. expect to shell out up to $500 to repair it. With no guarantee that the next screen won't do the same thing.
Design or Materials fault but they won't cover it by warranty.
well at least i know what caused it, sorted it a while back by replacing the digitsier myself. ended up getting it from the chinese ebay seller. before that i took out the digitiser, applied weight to the top and froze it lol, it worked but i replaced the digitiser anyway.
thanks for all your replys
Related
My touch screen has been getting out of alignment quite often. 3 or 4 times a day. I'll go to use it after leaving it on standby, and the touch screen alignment will be off by a half centimeter or more. its making very difficult to use. Sometimes very difficult to even get to the settings screen to realign it. I'm using a screen protector and to use my fingers instead of the stylus often. could have of this be having an affect? or does anyone have any idea whats goign on? thank you for any help you can give me.
Dan
I had a similar problem as well. Its kinda scary. Do you think its a software error? or could it be hardware *gulp*
I had this problem with some devices I issued out at work. I put screen protectors on them, and all kind of weirdness happened, and the screen getting out of alignment was one of them. I removed the screen protectors, and the problem went away.
Wizard platform has often that claim from many users. I'm not sure if working without screen protector is suitable for you and don't know it will help. In my case it did not.
The problem of kJAMs is related to the screens HTC used on this version. Unfortunately there is not software remedy. Some users attempted to change their devices under guarantee. Some are telling newer ROMs make the error less frequently.
You may also use "fire button + messaging button" combination as a shortcut to screen alignment page if you must live with this. Better than nothing ?!
fixed my qtek 9100
Well my wizard used to go out of alignment a lot. But I basically ruined it when I stuck it in my golf bag one day and let it get partially crushed while half-open...
The screen started to flicker a lot (in addition to not registering touch inputs). after a week it was unusable except by me since I knew where to push to get it to work.
Anyways, I gave up and asked around Hong Kong for people who can fix these PDAs. I found a store that offered to bring it to a specialist (no name given) for $380 hkd (~$50USD). Figured I had nothing to lose.
It actually works almost like new now. The slider is tighter, and the screen doesn't go out of alignment at all. I'd almost say its perfect except the "specialist" "broke" my volume slider when fixing it. Its not major so I decided against taking it back to the store for further repairs (3 month warranty on their work). But it took 3-4 days for them to fix.
I figure someone with the screwdrivers and stuff can probably fix your problem. But I didn't have the guts to try it myself...
Four things you can do to help
1. After time dust etc... gets under the rim of the screen and adds to the misalignment problem. Get a piece of paper and put the corner under the rim and get all the dirt out.
2. Sometimes software causes the misalignment - in my case it was using vjtoggletoday - so check or your software particular ones that change your today screen e.g. wisbar etc...
3. You could do a hard reset and try device in factory state for a while to see if it is a software or hard ware problem
4. Update to the latest rom.
Thanks for your help guys. Even though i didn't like your answers. I tried cleaning dust from under the border of the screen. It worked well for now. but it hasn't been more than 12 hours. I hope it continues. If i cant get it to stop i might have to sell my phone on ebay. they seem to go for only 50 dollars less on ebay than i payed for it in the first place. I hate to ask this question. but what could i replace this phone wiht that wont have this problem. and has windows? Basically what would you suggest as a replacement. And not the TytTn because i dont think i'll be able to afford that one.
Thank you.
lets hope that i dont have to fish dust out of my phone every day.
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?
p3eps said:
I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?
Click to expand...
Click to collapse
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal
Search for "weird touchscreen behaviour".
If you send it back to HTC they'll change the screen and it will come back fixed, or they'll do something random and it won't.
I don't think its just you, I have similar issues! I'm learning to type slower, and there are some links in the tips & hints thread that may help.
I reflashed back to the stock ROM and surprise surprise, same problem.
I emailed HTC back who then said it would have to come back for repair.
They said to phone them to arrange, so its all set up - being collected by UPS tomorrow. Hopefully it will all get sorted.
On another note - I'm now using an old Nokia 3600 Slide while my HD2 is all packed up. I'm loving having an old keypad again! Texting is a delight again, and the small form factor of this phone is great. Its a shame the screen is tiny and the Opera Mini functionality is poop!!
If HTC did a modern version of the Touch Dual with a big touch screen and a slide out keyboard then I'd buy one in a flash! Maybe I'll get a Touch Pro 3 when it comes out
did you try this?? it works for me.Hope it helps
jaqubek said:
did you try this?? it works for me.Hope it helps
Click to expand...
Click to collapse
I have been using that - or a similar one - for the last few months, which helps a bit. The problem isn't the sensitivity though, its the accuracy of the screen. When I press 'P' I get 'O', or 'R' I get 'E'. Its like its not quite lined up correctly.
hmm... I had exactly the same problem,but just because screen was too sensitive and this cab helped. Have you also tried align screen??
If this one won`t help I think your fingers are too big (sorry,joke)
hoss_n2 said:
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal
Click to expand...
Click to collapse
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair
patton82 said:
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair
Click to expand...
Click to collapse
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Did you flash the phone back to stock at all?
Yes, you need to remove the HSPL and that can only be done by flashing a stock rom from the memory stick - USB flashes the stock rom but leaves the HSPL intact. If you don't they will send it back to you saying the warranty is void. As well as replacing my screen they upgraded the stock O2 rom I had on it so they obviously check the software even if it's a hardware issue you have sent it back for. It goes without saying the first thing I did when I opened the box was replace the HSPL and flash Xannytech's Evolution.
I know to get rid of it, was just wondering if you did
Touch wood never had to send mine back but at least they can't tell you've HSPL'd it in the past...
hoss_n2 said:
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue
Click to expand...
Click to collapse
Not all HD2 have this issues, at default (without registry tweaks) was impossible to write anything for me.
Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
You had a different kind of issue, should know if someone with shaking/poor accurancy screen has sent his phone back
Well folks... my phone was picked up last week by UPS and returned to me today.
Before sending it off I reflashed the stock ROM and got rid of HSPL.
I've tested it a bit and am very happy - so I'm now flashing my Miri ROM back on as I type! HTC have replaced 'LCM (LCD)' and replaced 'Rigid-Flex Board (FPC Board)' as their diagnostic stated 'Touch Panel function abnormally and Camera Flash Malfunction'.
Typing feels like it should as the key I hit is now the one that actually presses. I don't know about the camera as I haven't tried it yet - but I didn't think there was anything wrong with it.
My only complaint is that the phone went in for repair with an HTC Screen Protector fitted, and they must've removed and refitted it - as its full of bubbles and knackered! Never mind - I'll order another one.
If anyone has the problems I described... contact HTC and get it sorted, as this is like using a new phone. Hopefully I won't feel the need to throw it again!
I'm mightily pissed off as I have just had to return my Leo back for the 2nd time with exactly the same problem as I had previously (see above). HTC and their crappy cheap LCDs must be costing them a lot of money.
I've been experiencing almost all the bugs in my HD2, last month i sent it back to HTC for repair.
They changed the touchscreen and display because they thought it wasn't bright enough (i didn't notice that).
I got it back a week ago and immediately saw that i now have a different touchscreen, more dots and diagonal lines can be seen.
All the problems are gone and i haven't been experiencing any problems the last week.
My Advise for people with touchscreen problems, have your touchscreen replaced !
Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
i had the white blotches issue too and htc also replaced my screen under warranty (turnaround 11 calendar days) and paid carriage both ways; this despite my lacking a sales invoice, having bought the phone used on ebay and the moisture tab being tripped (which they also replaced).
a very good service from htc only slightly spoiled by the tech who reassembled my phone leaving a fingerprint on the *inside* of the camera lens cover glass which rather than sending it back to them again, i cleaned off myself by means of unscrewing the back panel.
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
AngelDeath said:
Greets all,
I know probably this is the wrong section but I thought I would get a quicker response to my dilema. I was testing out my rom on my Test HD2 phone (I have two of them) and this one has the infamous end key issue, and tested my patience, so I read that if you use a very small flathead screw driver and push a certain place, you can get it to unstick, being that I tried all my methods that usually worked, I decide to try, well, the screwdriver slipped under the button part between the end key and the back key and screwed up my screen where I have all funny colors all over. So I was wondering if any could tell me if this is a LCD problem or a digitizer problem. There is no running liquid on the screen. The screenshot below is exactly what my screen looks like, and I want to buy the replacement, but I dont want to buy the wrong part and waste money, so can someone please let me know what it is that I have to replace? Thanks!
Click to expand...
Click to collapse
Its definetly an LCD issue, anyways not a major issue, as long as you can dismantle the phone and clear up the area btw the LCD and Keypad, i guess it should be back to normal
When you say Clear up the area, mind clarifying what that means? I can dismantle the phone, at this point it would probably be cheaper then sending for repair especially that its most likely out of warranty anyway.
I'm pretty much under the impression I am going to need to buy a lcd/digitizer combo to fix this. Unless I dont have to, cause like I said there is no bleeding and the phone works fine (minus the touchscreen issue caused by the end key) I can navigate thru the phone using droid explorers Screencast.
well what i intened to say was that there could be particles of dust or debris that is causing the LCD ribbon to come out a little, Coz i had a similar issue with "Dead touchscreen workin hard press end key " , later when i dismantled the phone and put it back again my screen looked exactly like yours, all i had to do was open it again and fix the LCD flex to the Main board properly thats all.
on a side note:
Well the touchscreen issue eventualy died all together, and i now have a replaced LCD from HTC and the screen is dull