My touch screen has been getting out of alignment quite often. 3 or 4 times a day. I'll go to use it after leaving it on standby, and the touch screen alignment will be off by a half centimeter or more. its making very difficult to use. Sometimes very difficult to even get to the settings screen to realign it. I'm using a screen protector and to use my fingers instead of the stylus often. could have of this be having an affect? or does anyone have any idea whats goign on? thank you for any help you can give me.
Dan
I had a similar problem as well. Its kinda scary. Do you think its a software error? or could it be hardware *gulp*
I had this problem with some devices I issued out at work. I put screen protectors on them, and all kind of weirdness happened, and the screen getting out of alignment was one of them. I removed the screen protectors, and the problem went away.
Wizard platform has often that claim from many users. I'm not sure if working without screen protector is suitable for you and don't know it will help. In my case it did not.
The problem of kJAMs is related to the screens HTC used on this version. Unfortunately there is not software remedy. Some users attempted to change their devices under guarantee. Some are telling newer ROMs make the error less frequently.
You may also use "fire button + messaging button" combination as a shortcut to screen alignment page if you must live with this. Better than nothing ?!
fixed my qtek 9100
Well my wizard used to go out of alignment a lot. But I basically ruined it when I stuck it in my golf bag one day and let it get partially crushed while half-open...
The screen started to flicker a lot (in addition to not registering touch inputs). after a week it was unusable except by me since I knew where to push to get it to work.
Anyways, I gave up and asked around Hong Kong for people who can fix these PDAs. I found a store that offered to bring it to a specialist (no name given) for $380 hkd (~$50USD). Figured I had nothing to lose.
It actually works almost like new now. The slider is tighter, and the screen doesn't go out of alignment at all. I'd almost say its perfect except the "specialist" "broke" my volume slider when fixing it. Its not major so I decided against taking it back to the store for further repairs (3 month warranty on their work). But it took 3-4 days for them to fix.
I figure someone with the screwdrivers and stuff can probably fix your problem. But I didn't have the guts to try it myself...
Four things you can do to help
1. After time dust etc... gets under the rim of the screen and adds to the misalignment problem. Get a piece of paper and put the corner under the rim and get all the dirt out.
2. Sometimes software causes the misalignment - in my case it was using vjtoggletoday - so check or your software particular ones that change your today screen e.g. wisbar etc...
3. You could do a hard reset and try device in factory state for a while to see if it is a software or hard ware problem
4. Update to the latest rom.
Thanks for your help guys. Even though i didn't like your answers. I tried cleaning dust from under the border of the screen. It worked well for now. but it hasn't been more than 12 hours. I hope it continues. If i cant get it to stop i might have to sell my phone on ebay. they seem to go for only 50 dollars less on ebay than i payed for it in the first place. I hate to ask this question. but what could i replace this phone wiht that wont have this problem. and has windows? Basically what would you suggest as a replacement. And not the TytTn because i dont think i'll be able to afford that one.
Thank you.
lets hope that i dont have to fish dust out of my phone every day.
Related
Hey all First post, w00t.
New to the PDA type phone thing and learning what i can from here. Dont quite understand WM5 yet but i'll get it eventually.
nice fourm you all have here
A few post have hit the nail on the head with issues with the phone.
No hinge LED's when the phone rings is my main hate at the mo i think.
Also anyone know how to get media player to play videos in full screen? all it does is puts a black border round the video rather than streching it. This would be cool
Whats the differance between the o2 (or different) and corporate install type?
Also TomTom M5.2 is coming up all green lines, had a quick search and cant find a fix. Anyone?
Thought i'd drop on and say i've had a problem with my screen (gotta love us being beta testers ehh?) Only got the phone at chrimbo and woke up the other morning to find that the screen wouldnt tap. It seems that the screen is now tapping itself randomly, closing applications and not letting me use the touch screen at all. You cant reallign the screen.
Seems a few people have had this problem and it seems un-fixable, soft, hard resets and reinstalling the ROM doesnt work. pulling the battery out and leaving it for a short while seems to cure the problem for a short while.
If you're having this problem, call the retailer and have it replaced. Defo seems to be a hardware issue, maybe a bad batch?
I'm waiting on them getting a new one in store for me.
HTH
JAmes
The screen issue does seem similar to the problem I was having.
Was on and off, but totally stopped responding early Sunday morning. Didn't start working again after numerous resets. Took it to the O2 shop today and it decided to start working again...
But they believed me, gave me a replacement and I've had zero problems with this one.
Seems like there may be some faulty ones about. Get it changed and hope they don't give you another faulty one
It seems that as of late I have to re-align my screen almost on a daily basis. It will be ok vertically, but horizontally it seems that it's always shifting.
Has anyone else ran into this?
Yep, I've run into it. Sometimes it can go days without having to realign it, other times I have to realign it every 15 minutes. Seriously. I thought it might have something to do with opening and closing the keyboard but it's been hit and miss so far. I can't prove that it and I can't prove that it isn't. Sure would be nice to figure out what it is, however, and have it fixed.
How do you carry your phone around? Do you keep it in a case on a belt clip or do you keep it in a front pocket of your pants? If you do not use a case then try it for a few days and see if this helps with the alignment problem. (Body heat and/or pressure on the screen may cause the alignment to drift.)
This is a know hardware defect. It should be covered by your warrenty. T-Mobile exchanged mine with no problem.
Mine had the same issue but it hasnt been an issue since the 2.26 update on Tmo.
I had my phone replaced and it's still having the alignment issue. This sucks bad. Realigning and resets doesn't help!
optical said:
I had my phone replaced and it's still having the alignment issue. This sucks bad. Realigning and resets doesn't help!
Click to expand...
Click to collapse
Getting rid of magic button and vbar, if you run those apps, did the trick for me...I switched to wisbar desktop and ever since I have not had to realign my screen once in 2 months
I'm going to try this out and let everyone know. I'm having the terrible screen alignment problems (I at first thought that it was the keyboard and switching landscape mode) but I have magic button installed. Going to try the switch to wisbar lite and see if that helps. Does anyone know if the business card trick for the hermes will help with this?
I think it is a hardware defect, i have problems with mine, not only i have to re-align it often, my screen is also not responding to touch either. (from time to time).
Not to respond right away without extensive testing, but I did just put on wisbar lite and noticed a definite improvement in aligment (certainly seemed better than magic button) someone else should try this too and see if they notice an improvement.
I was having this issue for awhile. The card trick had helped on my previous 8125 but not this time. Carrying it in the case instead of my pocket seems to help quite a bit. The issue also seemed to be affected by pushing on the plastics around the screen so that might be a clue right there too.
align
delete
Sounds similar to my fix of pushing on the plastics all the way around. I haven't really had this problem since I did so and I have only had to realign it a couple of times in the last few weeks.
my phone's alignment used to get screwed up multiple times a day.
I took the stupid stick on screen protector off it though and haven't had that problem nearly as often. I maybe realign once a week, and when I do, it's only because it's off just a bit.
I had alignment problems frequently a few months ago but it is all history now.
1) Fix current alignment problem.
Just make sure you confirm if it is a hardware defect first, by checking the tiny gaps between the touchscreen and the casing for dust particles. Use a high power scope(I work in a semicon backend company so no problems getting one). Clean the gaps all around the touchscreen. See if that fixes your alignment problem. If it does, then probably your screen has some electronic problems(claim warranty).
2) Protect your screen from pressure at ALL times except when you use it with your stylus or finger.
I carry my Wizard in my pocket with a plastic transparent plate covering the entrie screen(ala HP's RW6828 forgot that model already).. Have been doing this since last year and no alignment required since last year...
Just wonder why HTC doesn't make it an option of have the protective screen on their devices... Beats having a bulky casing..
Permanent fix for Alignment problem in 10 seconds
Well I read many posts and finally came to the conclusion that the best and permanent fix for the alignment problem is as under.
Slide out the keyboard, you will find 2 screws at the back. Loosen them and then retighten them but not as hard as they originally were but lightly.
Presto
Problem solved.
U will never see your screen misalign again.
Thanks
software problem
The original Cingular wm5 rom had this alignment problem, I flashed NBD's WM6 v5.1 rom and it was fixed. I tried other wm6 roms with mixed results, some would get misaligned, others alignment stays perfect. Anyway the NBD rom just works, improves battery life, speed, I could go on all day.
http://forum.xda-developers.com/showthread.php?t=299821
Hi, going through the emails on this list was indeed very useful. I bought an iMate JASJAM in January 2007 and it started giving me a weird problem with the screen.
The phone was working perfectly OK till Mid Feb when I started noticing that any application I opened (including phone or contacts) got closed automatically within a second. I observed carefully and saw that the 'X' on the top left corner of the screen was probably getting clicked on its own. I suspected it is most probably a screen problem and took it to the iMate service center. They promptly replaced the screen in 2 days.
It worked fine for 15 days before I am seeing the problem again. Could someone help me please. I am seriously dependent on email through my phone for my work. Would appreciate any sort of guidance, even if it seems obvious.
My JASJAM is 647XX s/n based
Thanks a ton,
Aditya Deshoande
If indeed the X is getting phantom taps, this is not a screen problem as such. In other words, you could replace the screen time and again and it would recur. The issue is that the screen gets pressre/pressed by the bezel around the screen. The screen is rather stupidly sensitive to touches even below the bezel. Pressure can arise from a slight twist in bezel, from heat expansion and from dust trapped between bezel and screen. You might try the "business card solution" - though it is not guaranteed.
I would also take a backup and do a hard reset. Try the problem apps without restoring the backup. This will identify whether it's software or the SA related problem.
f the problem is still there, I would demand a replacement not a fix, because if something is out of line it's not going to be fixed by swapping screens.
Mike
Thank you
Mike,
Thank you for posting a reply so quickly. I suspected it is not just a screen alignment issue the moment it appeared again. None of the fixes mentioned for the SA issue work. I just wanted to check if anyone has any suggestions to try something. There are no applications installed by me and I have tried hard reset. In fact the crosshair in the align screen application keeps moving without me touching the screen.
The problem is that this problem makes the phone useless because I cannot open the dialer. We need to be extremely careful of what iMate and HTC seem to be shipping out. This is a damn expensive phone to have such problems.
I will request for a replacement but would not be surprised if I am refused and told that it will be repaired since it is warranty.
Let us see if I need to drag them to consumer forum. I will, if the need arises.
Regards
Adi
Good luck Adi - I hope it works out. Yes that jumping around of the cross hairs does prove there is pressure being put on somewhere. Indeed HTC did appear to have largely resolved the SA and SA related problems - but I'm still seeing quite a few.
Cheers
Mike
Heats up during charging
Hi Mike,
Perhaps the problem is compounded by the fact that it really heats up if you charge the phone while it is still in the cover. The one with a belt clip that comes in the box
My screen does not respond to any taps anymore. Which in a way is good because I am at least able to call as well as send/receive emails.
Regards
Adi
Same problem here!
So my Hermes, which just got replaced by Cingular after the "red light..not charging problem" (Thanks for the pointers on that Mike!). But my new unit is also having phantom clicks on the x or in landscape the Start menu kept getting clicks. And I too got the moving crosshairs during screen alignment setup. Now the whole screen is whacked, not repsonding to any clicks.
Cingular are sending out another unit. I love my hermes, but seriously getting worried about the reliability of these units. I really can;t be without my unti working for too long, I'm stcuk having to go back to my SE P900 (with a flaky battery) or my SE S700 which sux.
It is a worry and very frustrating. However, when you get a good one it is well worth it. A hassle I know, but some folks here say they've been through 3/4 before being happy. This is the secret I think, put up with no physical defect and get an immediate replacement. Use a cheap mobile while you wait for the replacement. Most of the 'pain' comes from trying this and that and the other to get the device working and perhaps 6 out of ten times you fail. Use the warranty without hesitation. There ARE good ones out there!
My thought for today!!
Mike
Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test
Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).
It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.
Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike
I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!
I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.
BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.
jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike
Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike
Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.
yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike
White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers
well, my htc touch a while developed this look in certain lighting conditions with the screen backlight off that can only be described as looking like a opilspill, and i thought it might of been the touchscreen layers seperating, but untill just now it still worked fine so i wasnt too bothered, was working great one miniute and the next miniute i went to send a text and the touchscreen wasent responding. i tried a hard and soft reset , nothing and right now im extremly pi**ed off as i loved that phone and havent really got the cash for another one .
my question is what is the lightlyhood that the only thing gone is the digitiser, and has anyone used any of them dodgey chinese sellers on ebay as thats the only place i can fine them i dont wanna be leaving XDA developers so early
any advice will be aprieciated, feel like a famy pet jus died or summan
EDIT: dont think its relevent but im using the blue elves rom v6 i think
well you can try mymobiler and use your pc to try and correct any issues
i think the issue might be hardware as i have done a hard reset, did try using mymobiler just to use the phone after i had hard reset, but its either a bug or the way that the touchpads calibrated that i cant now after a hard reset.
what happens is the inital tap the screen to setup, that works, but mymobiler wont allow me to to the screen taps to calibrate.
Back to the box than till i can find a faulty one on ebay in the uk
Find another faulty one of eBay? Why not send it in to HTC and make use of their manufacturer warranty, hopefully its still covered. But worth a shot.
am going to do just that. it was definatly the digitiser have managed to get tho old digitiser working in a strange way, just pressure over time, am posting on it now, but its gonna need replacing but at least I got my phone back thanks everybody
what you are describing is newton rings
Beware of HTC's large screen phones.
Any force applied to them, even taking off a screen protector, is enough to produce "newton rings" and the screen stops responding to touch.
Not much use for a touch screen phone.
HTC refuse to cover this by warranty and refuse to negotiate. expect to shell out up to $500 to repair it. With no guarantee that the next screen won't do the same thing.
Design or Materials fault but they won't cover it by warranty.
well at least i know what caused it, sorted it a while back by replacing the digitsier myself. ended up getting it from the chinese ebay seller. before that i took out the digitiser, applied weight to the top and froze it lol, it worked but i replaced the digitiser anyway.
thanks for all your replys