Hello!!!
The problem is that when I'm working with device in can turn of by it self and don't turn on when i put in changer red led glows after some time it can turn on by itself ... I think the problem is in power keys that are marked by 1 in picture or power controller 2.
Sorry for my english i speak rusian...
Thanks for help...
I have a problem , when i tried to update my device it erased rom and when it started uploading os it shut down and error mesage apeared i don't knew what to do help me please!!!
I finaly downgrade to wm2003se rom but problem doesn't desapeare...This pda every time shutdown it self when i take battery and put it back it don't turn on.I need to whait and after some time it can tur on by itself
I don't knew what to do maybe someone here knew electronics
and can hel me with this problem...
Or may be i can find somewhere electronical scheme of mda or of mda's power...
i also have this problem, i also change a new battery, same problem.
it's only operate for a while (3mins - 1hour ) when i lucky,
after that restart, restart....can't load windows....
any Master can't help.
I need to find power controller but i don't knew where to get it...
My O2 xda ii also has such a problem. Also the phone couldn't last for 8 hrs in standby mode.
I'll try to replace power controler if I find it and post here results !!!
I got a qtek 9100 and when i soft reset my device the boot screen start with the back light after a few seconds shuts off and then goes to the windows mobile screen without the back light. the windows mobile screen does not go away. I tried hard reseting it also and the same thing happens. Can anybody tell me what the problem could be and some solutions. thanks for ur help guys
hi friends
i restarted the phone and it didnt start again .
actually all the lights are blinking when u press the power button or when u try to restart it .
i tried the hard restart but not working too. the o2 logo is also not comming
dhara31 said:
hi friends
i restarted the phone and it didnt start again .
actually all the lights are blinking when u press the power button or when u try to restart it .
i tried the hard restart but not working too. the o2 logo is also not comming
Click to expand...
Click to collapse
if you didn't do something else with it, just try to charge it.
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
today i put WM6.5 +QueROM Versions B1 on my herm 100. everything was fine till i instaled SPB Mobile shell. after install the phone freeze. i pull out battery and now won't bot. the scree freeze at that first windows splash screen. i think i broke my phone . any1 can help me to bring my phone back to life?
idk if this the right place for my problem, and sorry for my bad english
Just hard reset it and than it will works well again.
you press the two buttons above the send and end. (OK and WINDOWS BUTTONS) and keep them pressed, while they are pressed you press the reset buttonon the Device