Related
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
Hi all,
when you got the screen folded over and facing out, any way of locking the screen?
thanks
ross
I was also woundering about that...
when you have the screen in phone mode, there must be some way of locking the screen!
well if nobody here knows, o2 won't know!
Not sure if this answers your question but mine is set up thus:
In 'Settings/Buttons/Lock' set 'When device is off' to 'Lock all buttons except Power Button'
I keep the screen outwards and use the power button to lock/unlock.
One snag is that the phone seems to unlock itself when receiving an incoming call. I therefore can accidently cancel it trying to get the damn thing out of my pocket.
I do believe it locks the screen during installation of the ext rom..
This is done by running tpdisable.exe from the windows directory..
A word of warning though: IT'S DISABLED!
Unless you bind tpenable.exe to a button FIRST, you're screwed..
(Ok, a soft reset should fix it..)
I think they are called tpenable and tpdisable...
I don't have the device yet, so I can't check right now.
When I was looking at the config file, there was no mention of an exe, it was like a command (unlock your ext rom and take a look at it).
I got the impression this function was now embedded in the OS hence no exe. Probably wring of course....
Then it should be possible to make such a program, and assign it to a button..
Tried this one?
http://www.freewareppc.com/utilities/screenlockforpocketpc.shtml
could maybe work for your devicetype to
Hello,
pimbo said:
Tried this one?
http://www.freewareppc.com/utilities/screenlockforpocketpc.shtml
could maybe work for your devicetype to
Click to expand...
Click to collapse
Any one work out what the key combination is to diactivate it on the Universal?
TIA
I guess it would be the equivalent keys of leftmost and rightmost keys on HTC Blue Angel ('Windows' and 'Ok' keys!?)
However you guys, should try MortSaver (freeware also)
http://www.sto-helit.de/modules/wmpdownloads/viewcat.php?cid=7
At least you can set several parameter according your preferences.
I just found an issue related with Voice Speed Dial interworking.
Hello,
Conchas said:
... However you guys, should try MortSaver (freeware also)...
Click to expand...
Click to collapse
Many thanks, I like it!
A quick note to tell that CSDEVCTRL works perfectly on the Rhodium. Not only it is a light unlocking application enhancing the WM unlocking, but it is incredibly useful, with a number of goodies not related to unlocking. The hard button utility is highly configurable, it can work even when phone is locked (if you wish). I use it to toggle wifi or set bluetooth off, in order to save battery. AEButtonPlus did not identify buttons correctly on the Rhodium, but this one does.
Thread here :http://forum.xda-developers.com/showthread.php?t=386451
PS: the bluetooth toggle does not work at the moment due to the Rhodium stack, I use the hotkey utility to launch TurnBTOff.exe in \WIndows in order to set BT off.
Thierry
CSDEVCTRL locks the phone while having a call. So U cannot end your call bevor unlock again ...
Gonzo_62 said:
CSDEVCTRL locks the phone while having a call. So U cannot end your call bevor unlock again ...
Click to expand...
Click to collapse
This is a setting (I guess it prevents your ear to hang up when touching the screen on some phones), you can put it the way you like (in "Lock Triggers", uncheck "Lock During Call"). You can also set it so that only soft keys are locked.
Well, locked/freeze my phone a couple of times. Personally, not recommended. Don't really works well.
Well, I forgot to say that it does not look compatible with TF3D (I do not use TF3D). It is fully compatible with SPB Mobile Shell. I used it with "WM Today". Sorry !
Also the settings are not so easy to figure out : If you have a foreign Rom (French Orange for me), most important is to write the title displayed in at the top when Unlock Window is shown (Déverrouiller instead of UNLOCK for me)in the Unlock Triggers window, the same with Phone (Téléphone for me) in the Lock Triggers window).
thierry2064 said:
Well, I forgot to say that it does not look compatible with TF3D (I do not use TF3D). It is fully compatible with SPB Mobile Shell. I used it with "WM Today". Sorry ! .....
Click to expand...
Click to collapse
Ha! that explained why its work for you :> Well, SPB Mobile Shell is nice too, I will wait for SPB to have them make it 100% works on TP2
Hi guys!
I'm searching for an application wich can turn automaticly off my screen on call connect.
I've tried several solutions and programms, but none of them worked for my 6.5 ROM.
It really annoys me that i accidently press keys while calling. I can activate an automatic lock of the phone throught Smart Lock, but only an alternative surface appears where i press accidently keys, too.
The power button can switch off the touch screen, but it seems that after some minutes it switches on again automaticly and again i press buttons with my cheek....
It would be really really great if somebody could mention a possible solution or write a little programm to fix the problem!
Cheers and thanks alot!
Nobody got an idea?
I've tried several registry tweaks and programs like:
Touch InCall Screen Tweak
http://forum.xda-developers.com/showthread.php?t=488991
Touch Lock Pro
http://www.zuinigerijder.com/
but nothing affects wm 6.5....
the same here.
i've duttys r8 turbo rom and the display isn't disabled after a view seconds while doing a call.
tried to fix it by changing some values in hd tweak but without success.
is there nobody who has the same problem?
OK i've tried some more programs.
It works with the trial of PhoneAlarm! But i really dont want to use second today to run the today plugin (the program doesnt work without it), i'm using manilla.
so its possible!
anybody got a solution or knows the algorithm of phone alarm?
cheers
Hello,
How to lock also the Hardwarebuttons with the Default Sliderlock.
I don't want to use a other Sreenlock Program.
I just like to lock the Buttons also when the Screen is loecked.
any Solutions?
Thanks
Are the buttons active at all? During screen lock, I guess only the endcall button is active, waking up your phone.
alex fung ,
you are wrong.
All hard ware buttons except vol buttons can walk the phone/ turn on the screen.
ah you are right. They wake up the screen, but the touch panel is still locked. Try TouchLockPro.
any simple solution please, touch lock pro is soo confusing...
and is there is some solution to lock phone on backlight off, i mean dim is activated not locking when the screen goes off
tnx in advance
Hope this helps
To lock the hardware buttons with the phone in lock mode try modifing the registry.( it is simple but do this at you own risk)
Install a free registry explorer like PHM RegitEdit im sure you will find here it on this site (regedit.Mrln_ARM.cab ) Donate if you like
When installed open and navigate to: "HKEY_CURRENT_USER",Then "ControlPanel",Then highlight "Keybd".
Change "DefaultKeyLock" value data to "1"
Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work!
[/QUOTE] Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work![/QUOTE]
...that part is not mworking on my HTC LEO withh updated offical ROM WWE.
I changed the registry , restarted and still the screen dims but noit locking ..after siome seconds screen goes off. my idea was to have screen locked on dim and stays like this for about 30-40 secs and then to go off.
any suggestion pls.
tnx in advance
HKCU->Control->Keyboard->DefaultKeyLock=1
and
HKCU->ControlPanel->Backlight->AutoDeviceLockEnable=1
is all i need.
It works like i would like to have it.
Thank you.
Touch lock pro is a realy nice program and i appreciate his work, but to me it has to many features.
I've been after this answer for a little while now, and was pleased to find this thread. But... when I looked at my registry settings they were already as you suggest, but all of the buttons along the bottom of the phone still wake it up. Is there another step that I don't know about? (I have tried soft-reset).
I'm running SPB Mobile Shell - perhaps that's getting in the way?
I'll keep looking for a solution and post here is I find anything.
Anyone else have any more ideas?
Thats a shame it wont work for you,It may be spb mobile shell, Rom related or an old locking program you had installed.
Shot in the dark but have you tried changing the values back, soft reseting and then changing them forward again and soft reseting?
registry not working on my HTC LEO too..
dang.. registry doesn't work on my Leo too..
any other way to solve this??
Try soft reseting.
only open your registry editor and make changes then ,wait for 2-3 minutes ( wont matter if your device goes off )
(If off wake device up)Then soft reset again.
otherwise use a different reg editor or flash another rom.
N.B or just use this, it is small and cool:http://forum.xda-developers.com/showthread.php?t=505032
any recommended reg editor??
I never have a problem with PHM but resco is good.
http://www.resco.net/pocketpc/explorer/
Remember you will need to wait some time before windows stores the new settings properly. Soft reseting straight away probabley wont work.