Related
has anyone else problem with the htc home customizer??
i need to take a hard reset after rebooting
Same thing
You have to change the originale HTC Home with Kaiser.HTC.Home.v2.0.814.722-schen
But i prefer keep 4 tabs 'cause the display is smaller and tabs would became too small
I hv the same problem,
finally I need to restore the backup file ....
I used HHC without installing any homeplugins.
Just installed HHC and modfied the original homeplug from the device.
No problems so far.
But i have a xda star (o2 branded dual), so the roms may differ...
Same here - worked like a charm
Same here it crashed on me!! had to hard reset! I guess it only works with certain touch dual ROM's e.g. O2.
Hi Folks.. just tried the HHC also and cant enter the device lock code.. no response of any soft or hard key of my nike (o2 xda star)
any chance to solve that without hard reset? made so many customizations without backing up
Hi guys, when you installed the customizer into the phone, did you ever see an error message "Can't find the tapsetting" ? I guess this is the main problem ....
DO NOT touch the "Tabsetting" key!!
i tried to manually add the "Tabsetting" key under HTCHome... now, like after installing HHC, all soft & physical keys not responding.
hard reset in progress...
-------
(further update)
seems the HTCHome version can really handle this key... yet i couldn't find the right data type and data value to enable the music player tab.... i could only find some possible values that lead to zero tab or disabling all soft & physical keys.
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
t0p0gigi0 said:
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
Click to expand...
Click to collapse
Done
Stupid manual..... say to do ENTER to reset phone, but do not specified that enter is not exactly the enter key of keypad but it's the key in middle of direction cursors that is between RED and GREEN keys.
At least I hope this helps anyone.
UK Orange Touch Dual here, no problem with HHC at all
U have to change the language of the HHC, i had the same problem with italian HHC and English Home plugin.
After reboot, WM6 don't loads. ( sorry 4 my bad english )
Haven't encounter no problems, works smoothly and nicely.
Hey guys,
I installed Touchflo on my Xperia. Works very well! But i have a problem.
The right key keeps remapping it's self back to "Today" after i start Touchflo.
I want this button to turn the display arround, but everytime i set it up, it remapps itself again after starting Touchflo.
I there a solution for this problem?
settings -> button -> map as whatever you want
what do you mean with "turn the display arround"? landscape?
In short, no solution if you have TF3D installed.
Install AWBPlus.
@guap
yes, i mean landscape.
@paroxsym
are your sure? is this a known problem?
You could start TouchFlo via MortScript.
Last lines should be
Sleep(10000)
RegWriteDWord("HKLM","Software\Microsoft\Shell\Keys\40C3","Flags",14)
and the Button gets remapped. I've got this in my Autostart folder.
Sounds complicated ^^
I hope this problem will be fixed in the coming Manila 2 landscape.
you gotta search for hd-tweak...it´s somwhere in the blackstone forum...i got it on my xperia, and it just works find.
softreset included
there´s the link: http://forum.xda-developers.com/showthread.php?t=452505
In the Deveopment/Hacking forum, you can find a fix from me which works without further tweaking tools
I hope the simple trick will be used by the rom cooks in further ROMs, at least Hammamed told me he will use it
there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)
Hello,
How to lock also the Hardwarebuttons with the Default Sliderlock.
I don't want to use a other Sreenlock Program.
I just like to lock the Buttons also when the Screen is loecked.
any Solutions?
Thanks
Are the buttons active at all? During screen lock, I guess only the endcall button is active, waking up your phone.
alex fung ,
you are wrong.
All hard ware buttons except vol buttons can walk the phone/ turn on the screen.
ah you are right. They wake up the screen, but the touch panel is still locked. Try TouchLockPro.
any simple solution please, touch lock pro is soo confusing...
and is there is some solution to lock phone on backlight off, i mean dim is activated not locking when the screen goes off
tnx in advance
Hope this helps
To lock the hardware buttons with the phone in lock mode try modifing the registry.( it is simple but do this at you own risk)
Install a free registry explorer like PHM RegitEdit im sure you will find here it on this site (regedit.Mrln_ARM.cab ) Donate if you like
When installed open and navigate to: "HKEY_CURRENT_USER",Then "ControlPanel",Then highlight "Keybd".
Change "DefaultKeyLock" value data to "1"
Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work!
[/QUOTE] Aslo if you feel brave: HKEY_CURRENT_USER-ControlPanel-Backlight.
Change "AutoDeviceLockEnable" value data to "1"
This should activate the lock screen when the screen dims.
Good Luck
NB: You will need to soft reset for the settings to work![/QUOTE]
...that part is not mworking on my HTC LEO withh updated offical ROM WWE.
I changed the registry , restarted and still the screen dims but noit locking ..after siome seconds screen goes off. my idea was to have screen locked on dim and stays like this for about 30-40 secs and then to go off.
any suggestion pls.
tnx in advance
HKCU->Control->Keyboard->DefaultKeyLock=1
and
HKCU->ControlPanel->Backlight->AutoDeviceLockEnable=1
is all i need.
It works like i would like to have it.
Thank you.
Touch lock pro is a realy nice program and i appreciate his work, but to me it has to many features.
I've been after this answer for a little while now, and was pleased to find this thread. But... when I looked at my registry settings they were already as you suggest, but all of the buttons along the bottom of the phone still wake it up. Is there another step that I don't know about? (I have tried soft-reset).
I'm running SPB Mobile Shell - perhaps that's getting in the way?
I'll keep looking for a solution and post here is I find anything.
Anyone else have any more ideas?
Thats a shame it wont work for you,It may be spb mobile shell, Rom related or an old locking program you had installed.
Shot in the dark but have you tried changing the values back, soft reseting and then changing them forward again and soft reseting?
registry not working on my HTC LEO too..
dang.. registry doesn't work on my Leo too..
any other way to solve this??
Try soft reseting.
only open your registry editor and make changes then ,wait for 2-3 minutes ( wont matter if your device goes off )
(If off wake device up)Then soft reset again.
otherwise use a different reg editor or flash another rom.
N.B or just use this, it is small and cool:http://forum.xda-developers.com/showthread.php?t=505032
any recommended reg editor??
I never have a problem with PHM but resco is good.
http://www.resco.net/pocketpc/explorer/
Remember you will need to wait some time before windows stores the new settings properly. Soft reseting straight away probabley wont work.
Hi Folks,
I´m still looking for a way to disable the hardware-keys while the devide is in sleepmode. Only the Powerbutton should wake up the device. And also only the screen-slider should answer or dismiss an incoming call....
I cant believe that there ist still no solution for this problem....
And please dont answer me with: use s2U2 or other 3rd Party stuff... there must be an other way to do so
Candy-men said:
Hi Folks,
I´m still looking for a way to disable the hardware-keys while the devide is in sleepmode. Only the Powerbutton should wake up the device. And also only the screen-slider should answer or dismiss an incoming call....
I cant believe that there ist still no solution for this problem....
And please dont answer me with: use s2U2 or other 3rd Party stuff... there must be an other way to do so
Click to expand...
Click to collapse
you have to.
I'm also interested in this. Why wake up the phone with another button then the one who put it in sleep in first place. I find it strange. Like if I put the light off in the kitchen then opened the fridge the kitchen light will come on. who would like that ???
Can someone find a solution for this I search everywhere with no satisfying result.
I newly updated my Topaz from 6.1 to 6.5.3 and I can't recall that I had this problem in 6.1 and i had 6.1 for over 1 year.
I would say that this issue has nothing with screen lock to do it's rather an issue with wake-up (What shall wake up the phone from sleeping status : a call, sms, mms, mail, hardware key, power button etc...)
Just when I decided to post my problem I found it's solution:
Set HKEY_CURRENT_USER\ControlPanel\Keybd\DefaultKeyLock to 0.
Now nothing wakes-up the phone except the power button.
I found a cab posted also here is the link : http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
found on page : http://forum.xda-developers.com/showthread.php?t=581531&page=2
posted by : triperko http://forum.xda-developers.com/member.php?u=393396
i´ve made the changes in the registry, but still every button wakes up my device. So this "tweak" won´t work for me
Well I know after posting for about 3 - 4 hours I got the problem back myself not understanding what I have done to get the problem back. Yesterday evening I spent all night trying to figure this out. I have CHT Lock screen enable + BharS_OBOE_Lock_Disable.Cab. I need this cab because I have Huashan lockscreen built in my rom. And the cab allows me to use the CHT lock screen. To solve my problem I have done the following:
1) Disable CHT lockscreen
2) Uninstalled the Cab
3) made sure the registry setting was there and problem solved.
3.1) reinstalled the cab
3.2) enabled the CHT Lockscreen
Still working...
4) Went to power option the win 6.5 setting just to take a look (didn't change a thing)
5) Problem returned.
Start all over again to solve my problem.
For now on I'm staying out of the power option in win 6.5 setting.
There is nothing you can do there anyway until CHT lock screen come with an option for enabling password on lock.
I'm sorry I don't have any scientific explanation for this. But till now I can say I have solved my problem hope it solves yours
I'm using WWE"Topaz Roms + Kitchen"Build 23130/21914"Manila 2.5.20182814.0"(August 20th)
No, this couldn´t solve my Problems, because i use CHT 1.6.1 and this version doesn´t have any Lockscreen options.
The real Point that i can´t understand is: This is still a WinMo 6.5 Version, why is the Menue-point : Lock all buttons except Power on/off not there?
There must be a way to get this point back. I can´t belive that we have an extra written WinMo Version for the HD2...
So, where is the registry setting to get back the point?
+1000
I also hate this problem with HD2 FYI. I had already opened a post on this a few weeks back.
http://forum.xda-developers.com/showthread.php?t=694109
Have your tried uninstalling CHT making sure the reg key above is set and Test ?
this needs to happen... any key to wake is just silly! and on a related point, only the on-screen slider should answer/reject an incoming call