problem with ipaq rw6815 - iPAQ rw6828, XDA Atom General

Hello,
I was trying to flash my rw6815 with win6.1 (NHOCBANME version) and everything was going nice and smoothly. i downgraded rom (from 1.05 to 1.01)..system is restarted and im at the point where i should install win 6.1. BUT!
I cant synchronize device and my computer! until that point everything was going acording to plan! when i unplug and plug back my device..nothing happens! i tryed to reinstal active sync! nothing! tryed all that on diferent computer! nothing!tryed newer (4.2, 4.5) and older versions (3.x) NOTHING! basicly im stuck with 1.01 rom..and in the middle of proces
Can someone please help?
i know that my last chance is to install wm6 over card reader but i dont have it!
10x in advance!

Related

Please save my SP3i :(

lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance

Please save my SP3i :(

lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance
you're ****ed mate.
problem solved, for those who Stuck in SPL1.xxx SPL 2.xxx after WM2005, please go to http://www.spv-developers.com/forum/showthread.php?p=3576#post3576
for how to get back to WM2003

Bricked my S200 after installing jasper AKU3.3 plz help!

hello all,
i'm a newscommer on this forum,i've trust in upgrade my phone with aku3
i correctly followed the topic , install step 1 (forG3) and step 2
my device worked fine after the first install (qteck 2.15 fr ->2.2 from step1)
i've synchronize my phone, and run the second part, installing without problems, reboot > freeze on the boot screen htc
no way to synchronize again. my phone is reconized by mtty (1.51 and 1.50) but i don't know how to use it
ipl 2.09
spl 2.20.0000
gsm 02.47.21
os 3.0.0.0
i've tried all the night to find a solution on all forum i knew, i drive me to this one, i think it could help me best ( you'r pro dudes )
but i'm allways stick. i've call htc division hotline (i'm from france) , they said i have to send back my phone ( but he's now out of waranty, cause it's not a legal rom i've installed, so i have to paid, and i've allready too much invest on my device)
plz said me there is still a hope!
did try upload another rom from bootloader ?
did try upload another rom from bootloader ?
but first try a hard-reset
i don't know how to load a rom from bootloader (i allready have made soft and hard reset
no one could help me ?
1. dowenload this latest Qtek official rom from here: ftp://xda:[email protected]_220734_2207114_024721_QtekWWE_Ship.exe
2. enter your S200 into bootloader mode by pressing power +camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the S200 to your pc (make sure your battery is fully charged)
4. run the Qtek official rom.
5. good luck!
i've tried those kind of upgrade several time, but without possibility of establishing an active sync connexion, it's impossible to launch the rom install...
does samebody knew if it's possible to make a rom dump with an emulator and copy it on a sd card for autoinstall backup in bootloader mode ?
while in bootloader you don't need to establish any activesync connection. just plug the usb cable, then if appears "usb" on phone you are good to go.
install the original DOPOD rom from the ftp.
this rom don't work, it give me the message
error 294 invalid vendor id
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
pti_nourson said:
it's now working ! great !
i've juste install again the step one of jester's aku3.3 (so, i'm on a 2.20 os, i think i'll keep it for a while )
thank you verry much
Click to expand...
Click to collapse
So you can now change your signature again, right

ROM 6815

Hey guys!
I found myself in a little dum situation today.
Tryed flashing my 6815 via pc and it loaded everything.
It downgraded my PBL to version 1.0.1 And loaded totaly different OS on my 6815. I used sp34053.exe for downgrading.
But now I am stuck with this I don't know how to call it OS that is totaly of screen left side is of screen like sombody cuted it.
and I cant upgrade my os via MSD card allso now I can't use USB vith PC cuz it doesn't recognize my device like nothing is connected (6815)
How can I repair this any ideas I know theres lot's of brainacs here so PLEEEEEEASE help me
you might want to try here
http://forum.xda-developers.com/forumdisplay.php?f=296
the 6815 is a rebadged Atom

Soft reset=hard reset=blmode help :(

When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Mod. edit: not dev related, moved to general
gl though
marcin-25 said:
When i made soft reset (after install any program). mda made hard reset and start bootloader mode. I can't write new rom. What can i do? If i start installing flash rom .exe after few whiles:error 201: get device data error. CAN NOT GET DEVICE DATA
Click to expand...
Click to collapse
I had same problem. I just remove battery and wait sometime. It should fix that. Well.. for me it fixed
Yes it's works, but is any chance to fixed it, upgrade new rom or something.
Prapably someone tryied upgrade bigstoragerom. If i could have backup rom, that's no problem, but i don't have. Other rom not start from sd card
I installed WWE 03, because it don't change radio. There was my problem. When I tryed to install roms before i change radio to 1.12 and wwe 03 work fine. So try like I do But you need install via usb cable and windows xp like i do (I don't have windows xp in my pc so I used Vmware workstation)
What's that rom WWE 03? I have 1.00.10 radio, rom 1.13.00 WWE, so? Could you send me working rom, who can flash my pda?
WWE 03 is cotulla rom. It had windows mobile 6.1. And I tryed to install this one, but lot time had errors. Firstly, I try to install this rom and I finaly upgraded radio with this rom 1.12, but OS installation stuck on 0%, so I cancel it. Noww I tried install this rom and everything working. No bootloader after soft reset, working good
Whitch rom you upgrade radio? your link not work I try to install WWE 03, but. i run upgrade.exe, next : your device software is about to be upadte from: (empty) to: (empty) . I click upgrade and here Checing the inforamtion on your device ... please wait, and i'm waiting sooo long :/ nothing change. I think that i must upgrade radio to 1.12, but how? I try many way
First link should work. It work for me. To succesfuly check your devise you should connect pc and PDA via active syns with windows XP. Then it will check your device and upgrade should work for me it worked
I have connected pda (windows xp) activesyns. Always, every rom, whitch i want to upgrade: update from: (empty) to: (empty). Only if i turn ON pda, then upgrade from: 1.0.10 to 1.12, click NEXT and pda goes to bootloader. "checking devace data" and nothing happened. I thing the last chance is upgrade rom from sd card in bootloader mode, but it must be backup rom from own pda This is the end :/ i may throw my megican to trash. Thanks for answers.
You should turn on PDA then connect to pc after that will be upgrade from to filled. When you click next automaticly go to bootloader and install new rom
Yes, i try that. Turn on, connect, upgrade, then pda goes to bootloader mode and nothing happened - "checking device infromation ...... " all the time. Do you know any way to upgrade from the sd card. I can't do a backup and change 416 bytes in new roms, like a say xda-developers tutorial. Without that pda not flash new rom from sd.
If you know anyone from your friends that have magician try get backup from him. If you don't have, last thing that I can advise, try other roms. You can find it there

Categories

Resources