Database Users

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.

why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]

mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out

one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again

Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)

guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.

i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest

update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??

You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.

Where can i get a radio stack rom...???
Click to expand...
Click to collapse

where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???

Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:

get a radio stack from here
http://lumpistefan.dyndns.org/tools/

Cincular 8525 stuck in Bootloader

I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?

Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help

Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!

Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.

1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......

Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time

Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.

Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol

Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up

I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks

need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas

kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...

TMO Wing Flash Question (no0b)

Hi everyone,
Ok, My names Z and I have been reading the forums on this site regarding TMO Wing and flashing over and over again. I then felt confident enough to flash my Wing using USPL. ( following this thread http://forum.xda-developers.com/showthread.php?t=421304 )
I can only get to step 7. ( Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.)
upon reaching 7 my screen stays white then the RUU pops up (my screen stays white) but i get an error that reads ERROR 203, now all i can do i click exit.
My Spl is 4.26.
My Ipl is 4.26.
I have tried this 6 times
Thanxs for the help.
Z

Try re-installing the USPL again
http://www.megaupload.com/?d=A4N36HLO and the you open it and open the RUU file copy and paste whatever nbh rom you want to flash run the herald uspl hit enter its going to prompt you then hit enter again this time you screen should go white at around 75 and when its at 100 active sync will disconnect by itself and reconnect then follow steps from there. Make sure you check all boxes and agree.

The best way to ensure that your rom will flash well i always flash the OEM wing rom first... I use the upgraded v. I have it if you need it.. Try all the steps again and again.. One thing i have noticed thou.. If you leave your wing on for a little well hooked up to activesycn it has stupid problems.. IDK why but eh.. I just disconnect and try again.. If you need ne help let me know... pm me.. I made a detailed step by step video on flashing the wing but stupid youtube kicked if off!!!!

THANX
lol, what an idiot, well me of course! It seems that i had the TMO stock rom in my RUU folder instead of the custom one.
well thanks for the reply though. I wouldn't have noticed it if i hadn't re-downloaded the USPL.

Need help! Rom update crashed hd2

I tried flashing the following to my HD2. Other ROMs have worked fine.
Duttys_Leo_Sense_2.5_5.2.23540.5.5.0_2.10_HG_V1_Radio_2.08.50.08_2_WWE
This time, when resetting it's hanging on the O2 screen. This means I can't get into the phone to try reflashing. How do I fix this please?!!!

craigpyro said:
I tried flashing the following to my HD2. Other ROMs have worked fine.
Duttys_Leo_Sense_2.5_5.2.23540.5.5.0_2.10_HG_V1_Radio_2.08.50.08_2_WWE
This time, when resetting it's hanging on the O2 screen. This means I can't get into the phone to try reflashing. How do I fix this please?!!!
Click to expand...
Click to collapse
You should take a look at the mtty thread if you want to recover from a bad flash...
Grtz,
Degake

Crap. I know nothing about this. noob!
This is going to be long and difficult isn't it?

craigpyro said:
Crap. I know nothing about this. noob!
This is going to be long and difficult isn't it?
Click to expand...
Click to collapse
If you post your problem in that thread, the experts over there will give you all the detailed steps and it won't be so bad after all
And I think that anything would be better than to buy a new HD2?
Grtz,
Degake

No, but you shoulda read the n00b flashing guide before flashing...do you have HSPL on your phone? Do you have it SIM-unlocked? Did you flash using activesync or sd card?

EddyOS said:
No, but you shoulda read the n00b flashing guide before flashing...do you have HSPL on your phone? Do you have it SIM-unlocked? Did you flash using activesync or sd card?
Click to expand...
Click to collapse
I did. I have most rcent HSPL, flashing using activesync and have done 4 "successfull" ROM upgrades.
This one appeared to be fine but when it did auto-reset it's now hanging and not booting into anything useful.
Thanks degake.

If a hard reset doesn't help then MTTY might be the only way out

Problem FIXED
Solution: Followed these steps
"This will remove the need for users, x64 in particular, to use “Unsigned Drivers.” Also since in Vista SP2 (x64 & x86) they removed the “F8” options Completely!
Files Needed:
Driver Signature Enforcement Overrider
Remove Watermark V0.8
1: Run the Driver Signature Enforcement Overrider and select “ENABLE TEST MODE” and Press Next
2: There will be a warning to REBOOT, Press “OK”
3: Go Back to Driver Signature Enforcement Overrider Select “Exit” then Click “Next”
4: REBOOT
5: Run the “Remove Watermark V0.8” for you OS type (x64 or x84)
6: In the Command Window type “Y” and wait for the process to complete
7: Once complete REBOOT your system and begin the driver install"
listed in post 2
http://forum.xda-developers.com/showthread.php?t=623356
Then
*Bring device into bootloader (Reset + Hold Vol Down), This will show the Red, Blue, Green screen showing "Serial"
From here I was able to re-run the customRRU file to flash the ROM again. (this may have been jumping the gun a little!)
Thanks for pointing me in the right direction guys.

that'll be MTTY!! Only had to use it once myself but it's a god send

EddyOS said:
that'll be MTTY!! Only had to use it once myself but it's a god send
Click to expand...
Click to collapse
Too True!!
How is liverpool? ive not been there for a while!! (Southport )
SS

Hi folks,
Had the same problem today with a bad flash, phone wouldnt boot up past o2 welcome screen etc etc.
I fixed it by just going into bootloader (hold volume down button on the side of the device while holding the power button down for 3 seconds) and installing the o2 stock (1.43) rom from my pc.
Edit: Cant seem to post the link as im a new user but "Football" posted it on this forum on 23rd of December if you need to search for it.
Sorry if this seems like a double post of the OPs solution but some people could be confused by the MTTY thread (I was) when in reality theres no need to even look at it.
Hope this helps someone.
Greg

Thanks for posting that comment. I did wonder if MTTY had anything to do with the solution (I dont even understand properly what MTTY is!) so I posted everything I did.
I had a feeling that I could have avoided those steps and just gone straight to the bootloader and you've proved me right. it's a quick and easy solution to a slightly scary problem!

Maybe someone can rescue me (quick! EEK!)

Hi all,
Maybe someone can help me out!
I am stuck at work - cant even really surf but had to post as I just feckered my mates HD2!
BOOOOO!!
So I installed HSPL and its still there.
Flashed up to energy ROM (APRIL 1st)
Then got stuck in reboot cycle - phone wouldnt boot unless it had power plugged in.
Took battery out of it and put mine in it which had higher charge - not much.
Then I got it booted into 6.5. Customised and changed settigns for Vodaphone.
Rebooted and phone stuck in loop again.
Couldnt get back into Vodaphone.
Went to bootloader and then used the official:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Flashed the bugger.
Then tried to boot again.
No boot without power inserted
Phone will not complete boot even with power
gives HTC white welcome, shows ROM etc
vibrates backto HTC white welcome.
Rinse
Repeat
Can anyone give me any ideas what I can do with this? He is coming to get it at 5.30; I am meant to have FPSECE Morph gear and all sorts of other shizzle for him
He is going to get a brick
any ideas would be GREATLY welcome.
no flames please if I missed something, I am desperate to sort this quick and quiet.

Try make Task29 and then reflash Radio and ROM, it could help you i think...

Have you installed radio 2.08 ?
You should. You can install it by downloading it and use customRUU to install the file.
Put phone in bootloader first.
Your mate's phone will be revived

What radio do you have installed. The NRG roms require radio 2.08.50 in order to boot.

Yea sounds like a radio issue. You didn't mention what phone? US Tmo HD2 or everywhere else HD2?

Is GSM HD2
I have done all above task 29 new radio - loads of roms.....stuck in circle.
Phone will not boot without apower lead in it
Ahh feck [email protected]

What version radio does it read then when you are stuck in your bootscreen ?
is it still 2.06 or 2.08 now ?
Installing HSPL doen NOT upgrade your Radio.
What is your SPL version ?
And "fecking ass" is groce. Try fecking some koent.

lucid said:
Have you installed radio 2.08 ?
You should. You can install it by downloading it and use customRUU to install the file.
Put phone in bootloader first.
Your mate's phone will be revived
Click to expand...
Click to collapse
ClydeB1 said:
What radio do you have installed. The NRG roms require radio 2.08.50 in order to boot.
Click to expand...
Click to collapse
Actually they dont require 2.08... they require a radio without .51 numbering.
You can use
2.07.50.27
or
2.08.50.08
either will work just fine.

misticjeff said:
Actually they dont require 2.08... they require a radio without .51 numbering.
You can use
2.07.50.27
or
2.08.50.08
either will work just fine.
Click to expand...
Click to collapse
True, I use 2.07 (old signature LOL), but just mentioned 2.08 as it's the recommended one.

Oh ****e
Ok all,
Big warning to all here:
See my attached image.
I bent the left most battery connection pin out a tiny little bit - so little I didnt notice it.
Then the phone would obviouslly only boot without the power plugged in.
The pin was being pushed out! and not connecting with the battery.
I bent it back and it booted whilst I was explaiing that I was having teething trouble with his new ROM.
HAHA
Thanks VERY much to all for ideas and fast feedback - really thought I done it in then! Bloody hell Id have had to give him mine!!!
OH NOOOOOOOOOOO!!
@ the try some Koent line......OH GOD LOLOLOL
Waht with the relief of fixing the device and a joke like that, I was ROFL ing it - Not RALPH ing it...
Thanks again all

Yarod, the above advice for the radio version applies only to the custom rom.
By flashing a factory rom from the memory card you have probably overwritten hspl which is why this dosen't boot.
First thing to do is reflash hspl in the bootloader, via usb. If you remove your memory card and hard reset, then you should get a working phone. Assuming it's a vodafone branded handset you can use a vodafone branded rom without the need for hspl - there's a 1.66 version up on the uk site.
If you want a custom rom, use hspl and check the radio requirements before flashing
and most importantly flash via the usb only to avoid overwriting hspl.
hth,
mike

hah! bent pin, nice one. Bet you felt a huuuge wave of relief wash over ya when it booted eh? Gotta love that post adrenaline comedown.

here we go again with another victim....
1. Hard reset
a. turn off your HD2
b. hold Volume up and down and press end button till it will vibrate show white screen that you wanna hard reset
c. release volume up and down
d. press volume up for continue Hard reset
e. press volume up for continue boot up
it will boot up your device...
2. install radio for energy click here or herefor download
3. Use Customs RUU from here
4. flash your radio
5. now you are good to go....
i hope this helps i know how you feel cause i had same problem and this phone worth a lot so... take care...

yarod_g14 said:
Hi all,
Maybe someone can help me out!
I am stuck at work - cant even really surf but had to post as I just feckered my mates HD2!
BOOOOO!!
So I installed HSPL and its still there.
Flashed up to energy ROM (APRIL 1st)
Then got stuck in reboot cycle - phone wouldnt boot unless it had power plugged in.
Took battery out of it and put mine in it which had higher charge - not much.
Then I got it booted into 6.5. Customised and changed settigns for Vodaphone.
Rebooted and phone stuck in loop again.
Couldnt get back into Vodaphone.
Went to bootloader and then used the official:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Flashed the bugger.
Then tried to boot again.
No boot without power inserted
Phone will not complete boot even with power
gives HTC white welcome, shows ROM etc
vibrates backto HTC white welcome.
Rinse
Repeat
Can anyone give me any ideas what I can do with this? He is coming to get it at 5.30; I am meant to have FPSECE Morph gear and all sorts of other shizzle for him
He is going to get a brick
any ideas would be GREATLY welcome.
no flames please if I missed something, I am desperate to sort this quick and quiet.
Click to expand...
Click to collapse
Hey! I did the same mistace, u need to download HSPLv2 , Install 2.06.0000
Then volume down + power botton, install stock ROM from HTC.com, and reboot.
That worked for me, hope it works for you.
Cheers.

lol
hi all this is fixed see my previous post, i had bent the battery pin - so small didn't notice it. i wonder if anyone else has suffered from this?
many thanks
i am tempted to fart in the general direction of the "another victim" statement
I'm a fixer not a victim lol...

yarod_g14 said:
hi all this is fixed see my previous post, i had bent the battery pin - so small didn't notice it. i wonder if anyone else has suffered from this?
many thanks
i am tempted to fart in the general direction of the "another victim" statement
I'm a fixer not a victim lol...
Click to expand...
Click to collapse
It just happened to me!! A billion thanks mate

Another reboot loop victim...
Bent battery pin seems to have been the culprit for me as well! sat on charge now to get it to 100% before I start reinstalling cabs and stuff.