Hi,
Downloaded the XDA Exec Rom update on to my laptop and then went about the install and followed the instructions. The next thing I know an error message pos up and when I look at my PDA the screen has gone completely blank!
I have hard restarted the PDA and just can't now get it to work. All I can see on an unlit screen horizontally at the top is 'USB' and at the bottom 'v1.00'.
ActiveSync will not recognise the device so now completely nadgered! Has Windows Mobile been completely wiped off the PDA?
Please help if you can!
Exec problem
I'm no expert but I had a similiar problem and resolved it as follows.
Disconnect the USB cable from the PC. Reboot the PC. Reconnect the USB. Run the ROM upgrade again and all should be well. I hope..... :lol:
I had this happen late last year, hard reset the device (using the two minus keys on the top row of the keyboard, at the same time press and hold the stylus in the reset button), then connect and re-run the new ROM installer, it wil take quite some time, about 50 mins if memory is correct, but this did work - Mke
Thank you very much indeed, it has worked! Have a fantastic day :lol:
ok I just got my mda out of the new box it was working fine.
I tried to update the rom, everything went well until 88% when the pc outta nowhere shut off. I dont know why it did this , my pc never turns off.
now its stuck in the RUU red green blue screen
some one plz heeeeeeeeeeelp
sometimes you can begin the update process all over again, and the rom flash will recover and complete.
Don't fret dude, all is not lost, I take it you didn't make a backup of your device to SD? Well no worries go to this thread http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard try to read up as much as you can there to make sure your not doing anything wrong, it's better to take an extra 15min reading then spending 1 hr worried about your machine. Question 2 I think applies to you:
"Q2 : What to do if the device hold at splash screen after upgrade?
A2:
- connect the device with usb cable
- hold the "voice dial" and shortly press the reset button by stylus
- release the reset button and wait for the USB color screen
- download and run the shipped ROM upgrade program (with .exe file extension) e.g. ftp://xda:[email protected]/Uploads/HTC_Wizard/Roms/
- you device will be bootable again.
- then start aWizard and run through the 'e', 'u', 'w' one by one. Of coz you have to connect your phone to ActiveSync before running the 'e' option. "
I hope your able to fix your problem bro, good luck!
Jesus, your title makes me want to hit you in the nose. Learn to spell
As for the update, I've never had a problem fixing it by doing what the poster above said. Mine was totally dead at one stage.
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
23/2/11,My windows 7 phone samsung Focus, I clicked on the button for the update in Zune, it started updating, but now it stays at step 7 from 10, the backup, it is on 100 % for already more than 2 hours but it doesn't continue to the next step. and then Zune display the error.Error code is C101002E
when I rePower on My phone , the phone screen display:Use usb to connected the computer! my phone can not boot into the OS !
I search a lot of fix ideas,but all is no work !
can anyone help me? thans a lot
Try the 3 button format on page one of your user manual. Press and hold the vol down, camera, then power and hold all 3 until it says do you want to format. Follow on screen instructions. This is to be done with the phone off...
If it can't be fixed, supposedly carriers will exchange it for a new one.
Hi,
Omnia 7 had been working fine up until now, steps leading up to the event:
* Debranded registry using chevron tool to install a regedit app.
* received pre nodo update and installed
* Used vpn workaround to install nodo update
* Phone worked fine for a month then when the 'walsh tool' was released I ran that. Went through OK and phone was still useable.
* A few hours later I was browsing the market place and phone rebooted itself and was stuck at the Omnia7 logo. Started phone in USB mode and connected to Zune to restore - got to 34% and errored saying "phone not responding".
* Power cycled again into usb mode and connected to PC but now the device is not recognised at all in Windows (nothing showing in device manager)
* restore mode is disabled but I have ordered a 'jig' tool.
My concern is that if USB mode is no longer picked up in Windows, that restore mode won't be picked up either. I should have the 'jig' in the next day or so.
I had the same problem about a week after I got my Omnia 7 in October last year.
Obviously I hadn’t used any tools for debranding or anything then, It seems like a fault with the phone to begin with, not due to anything you done.
I rang Orange and they sent me a brand new phone the next day. So try ringing your provider.
I tried connecting the phone again tonight and zune picks it up, gets to 99% complete on restore then stops. Seems the USB is being detected again - I did have the battery out of it overnight.
I have the same exact problem but without any jailbreaking
please I you find any solution just tell me
beacuse I don't have warranty I bought it via Ebay
Using the "jig" tool, I was able to enter download mode and reflash the device. I now have a "Welcome to your Samsung Omnia7" screen.
So I can confirm this method works.
Hi
In the Microsoft answer forum someone wrote that the problem was form the battery. So, I will go first with this one.
Regarding the download mode I have problem as well. When I hold pressing the volume up, camera and the power button it display the USB connection logo same as the one in the update. I don't know why!!!
Abd654 said:
Hi
In the Microsoft answer forum someone wrote that the problem was form the battery. So, I will go first with this one.
Regarding the download mode I have problem as well. When I hold pressing the volume up, camera and the power button it display the USB connection logo same as the one in the update. I don't know why!!!
Click to expand...
Click to collapse
That is because your bootloader does not support the Download Mode and enters the Zune Recovery Mode instead.
Hi! try with this
http://windowsteamblog.com/windows_...spx?utm_source=twitterfeed&utm_medium=twitter
Did you try Hard reset?
1. Press and hold down the Power button + Volume down button + Camera button all at the same time until the device vibrates, then let go of the Power button while continuing to hold down the Volume down button and the Camera button.
2. Shortly you should see the message displaying "Are you sure you want to format?", you can now release the Volume down button + Camera button.
I just formated and same problem appear again and again
I don't what to do
please help
in addition to that I don't have the download mode
You will have to get the jig tool to enter download mode to reflash, or send away for repair.
My phone is still playing up, random crashes then stuck at Omia logo. To get it started again I have to reinsert the battery and even then sometimes it gets stuck at the Windows Phone logo. I will try one more flash and if I still have problems I will be raising a warranty claim.
This happened to my phone this morning. Tried to open Beezz, but it wouldn't start (went right back to home screen).
I obviously tried a reboot, but it got stuck at the Samsung Omnia 7 -screen.
So far I have:
(no difference between the steps)
Installed the samsung update patch\fix
Hard reset
Reflash via download mode to KB2
Hard reset
Reflash via download mode to JK1
No success so far. At the moment I'm letting it stay turned on, and every minute or so it flashes black, but returns to the logo screen.
Any help would be appreciated :d
Mine seems to work for a day or so after a reflash, then starts playing up again. Sometimes stuck at logo until I take the battery out and then put back in. I had a problem opening the messaging app, would get the tile animation then back to homescreen. I have arranged to have my Omnia sent back under warranty so will see what they find.
After a power surge, my Omnia hanged then when I rebooted, its now stuck at that Logo Screen. Did everything possible (hard reset, flash rom, go into recovery mode which gets stuck after zune reboots the phone....)
Used the windows support tool and I get this message: The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Any help would be greatly appreciated
Sounds like you have tried everything I would have already. I would send it for repair / warranty.
Turns out my phone WAS faulty and it has been replaced - should receive replacememnt today (Has taken over a month)