hi, just posting about the status of my MDA PRO, after xda helped me fix my MDA Touch ( =D )
it was on charge one day, i picked it up and the usb port was still stuck to the charger!!!!!
it has also ripped up some of the PCB on one of the contacts, will it be possible to solder, i tried but failed.......
if not are these alright?
http://cgi.ebay.co.uk/DESKTOP-BATTERY-CHARGER-FOR-HTC-UNIVERSAL-O2-XDA-EXEC_W0QQitemZ350176962736QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneChargers?hash=item350176962736&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50
thanks
Tom
Damn.
Mine's going the same way When I wiggle the cable it disconnects, so, I'd imagine i'm a few weeks or months away from the same fate.
Good luck fixing it, if you intend to.
Wish HTC would make a successor!
yeah i have the same issue also. i purchased one of those type chargers and waiting for it to arrive. havent tried soldering mine as im waiting for the replacement connector to arrive also. whichever comes first. been 2 weeks already
is this considered a known issue with this model? meaning it will happen with any carrier branded universal. love the unit but dang.
i still have my original connector, the main problem is the PCB board stuck to the solder. and that as well as 4 big contacts, there's about 5 little ones that my soldering iron is too big for.
My granddad has a smaller one, so ill have a crack with that
let me know how th eexternal charger is. because if its very slow at charging its not worth it... as you cant leave the phone on while charging it
(two batteries maybe?)
got charger. takes 3 to 4 hours to charge my original battery. battery runs out at 38% but was doing that prior. bought another battery hasnt arrived though.
you will need a 2nd battery to have Uni run all day as i do depending on how much battery life you get out of yours.
but Uni working again now to flash rom via sd slot. need to test 3G with last Tmobile rom as im not getting it currently.
It is possible to resolder them i did it for a friend but it takes a steady hand and a fine soldering iron tip of about 1mm set on about 343 oC as you have to be very carefull not to overheat the socket or the plastic innards melt also there are a few surface mount components very close so you have to be carefull not to losen or remove those.
Related
Alright guys?
Accidentally leaned on my phone the other day whilst it was charging. Seems to have bent the charger port on the phone.
The phone still charges ONLY if the charger is plugged in and propped up in a certain way. needs to be pulled up slightly or there's no charge.
USB drive nor ADB work anymore so i'm guessing that a circuit has broken...
Does anybody know how these work?
If it's a case of broken connection, perhaps putting phone in an oven for a few mins will melt the the solder and hopefully fix the connection? (This worked fixing my 8800GT graphics card few years back!) Long shot
Ta
If it's truly broken then i'll probably get an SGS and then take a hammer to the HD2
The micro-usb port on HD2's is flimsy. It's probably snapped off from the mainboard, and putting pressure in the correct way is pushing it back together. Same thing happened to my HD2.
But there is some relatively good news. An external charger and an extra battery will only cost you about $16-18 USD on ebay. This has worked just fine for me for over a year. With dropbox installed on your phone and comp, you rarely have to connect via usb anyways.
if poss, check with another cable first.
I have a usb cable that looks fine but will only charge when angled downwards, no data, , yet if i bend it upwards it carries data but wont charge. my other usb cable works perfectly.
chances are it IS the port, as said they're pretty flimsy, however best to check, be a shame to bake your phone for the sake of a £2 cable.
same thing happened to me a few months ago,
the usb in the phone broke,
so i got a mains battery charger from ebay for about £4 and a few extra batterys,
been using them now for bout 2 months and all is good again,
it was a pain trying to get the usb in the right place for it to charge , i tryed the oven thing and it didnt work , not sure if i left it in there for long enough but i didnt want to ruin my phone completly.
easy option is to buy a mains battery charger
Thanks for the replies!
I'll look into a mains charger and 2-3 more batteries
So after my phone failing to charge at all last night I popped down to the local phone shop / stand in town and bought a universal battery charger.
+ and - aren't labelled on the charger so I assume it doesn't matter or it works out which is which?
It's a little slow and was a bit pricey, either way I have 63% battery now after a couple hours
Thanks
Wow mine's at 100% after a couple hours
Sent from my HTC HD2 using XDA App
Might grab a decent one from ebay and return the one I bought.
Sent from my HTC HD2 using XDA App
skymera said:
Might grab a decent one from ebay and return the one I bought.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
this is the one i got from ebay
http://www.ebay.co.uk/itm/AC-Wall-U...ories_MobilePhoneChargers&hash=item27b5da68d1
been working ok now for few months
skymera said:
If it's a case of broken connection, perhaps putting phone in an oven for a few mins will melt the the solder and hopefully fix the connection?
Click to expand...
Click to collapse
It will probably melt the plastic first, rendering your phone entirely useless...
DONT DO IT!
Hi everyone,
First of all, I apologize in advance,
1. Because I know this isn't a tech support forum.
2. Because I don't contribute and help out as much as I should.
Coming here was a last resort, I don't consider myself a noob, but I'm really stuck here.
Please note that I appreciate every single response, and I will donate if anyone can give me a fix.
With that aside, let me get started
__________________________________
Okay so about a week ago, I accidentally bent my charger when it was charging my note.
It didn't charge at all that night
That morning, I blew into the charge port on my note, suspecting that dust may have been the cause.
Somehow, that helped, as my note charged fully that day, in about 2-3 hours
Then I tried charging it the next night.
It charged incredibly slowly, reaching about 70% after 10 hours charge
The next few nights were similar, but reaching no more than 40% charge after 10 hours.
It got progressively worse, it would only charge if I applied pressure to the mini-usb,
I looked around this morning, and stumbled across another guy with the same problem
(see here http://www.galaxynoteforum.net/galaxy-note-help/charging-port-issue/ )
He advised,
"Well I have figured out the issue. If you look into the charging port slot on the phone you will notice a small thin flat piece of metal which inserts into the charger. That was slanted and angled downward which would not let "ANY" charger or docking station charge correctly also causing it to drain the battery. Contacts on this piece and the phone were to close causing a minor contact draining power. I used a precision flathead screw driver and lifted the piece slightly and now works fine"
So I tried that, and it seemed to help, as the note began charging, (extremely slowly, reaching about 30%)
Then I tried pushing that "thin flat piece of metal up even further"
However, I went too far, and I couldn't fit the charger into the charge port.
So I tried pushing it back into the centre but I may have damaged one of the pins in the charge port (inside the phone)
I seen a little spark, and the note turned off.
I tried switching it on, and managed to boot to safe mode (no idea how)
So then I tried charging it, I applied pressure and managed to get it to start charging. (thank god)
This was about 30 mins ago, it looks to be holding the charge at about 20%, but it's not increasing
-----------------------------------------------------
I suspect one of the pins in the note charge port was snapped off.. although I'm not sure.. (it appears to be the one on the right)
1.Does anyone know how many pins there are on the charge port inside the note? (is it 4 or 5?)
2.What should I do?
If I broke a pin, it should not charge at all, right? (but it seems to be charging)
3. Do I need to replace the charge port, if so, how much would it cost?
4. Would I be better off getting a charging station, and charging the battery using that
5. Should I try moving the metal strip again? (inside the charge port of the note)
oops forgot to mention, when the problem started, and the note was slow-charging, an audible buzzing/humming could be heard in the wall outlet
also, I'm using my original samsung usb charger, not a generic one, and I'm charging directly into a wall outlet.
------------------------------------------------------------------
Thank you for taking the time to read this, I really appreciate it, and any advise that you do offer.
Cyber735
Here my tipp: You can go to a service center, maybe they even repair it under warranty. Or you can order a new micro usb port and replace it. Google should help you to find a seller. Depends on whether you feel comfortable enough to replace it yourself or not. Oh one more thing, I would stopp using your Note to avoid any further damage.
Sent from my Galaxy Note running ICS
there are 5 pins on the charger slot, 4 I believe are for data transfer and the 5th being the one that draws power (charges the phone)
Have you tried transferring data from PC to Phone and see how that pans out ?
Its possible to replace the USB port, Ive seen a few threads about this on XDA, A quick search should chuck out some results.
But as mentioned above, Try to claim under warranty first, if you have it, or pay the Service centre to do it if you dont feel confident enough to do it yourself.
I think I recall someone with a similar issue and it cost him / her $60 for USB replacement (convert that in to your currency)
If you have a friend with a Note or a phone that fits the Note's battery you could always charge your battery in that phone and place it into yours until you get it fixed.
IF YOU MUST charge your Note ( you could if you intend to get a new USB slot) I would suggest to charge only via USB - as in charging from your PC / Laptop / TV / PS3 etc. As this will not draw as much current as it would coming directly from the mains supply!
Good luck on getting it fixed, And please keep us posted with the results !
http://pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
check this out. It gives the pin configuration. I am no expert but hope it helps!
altae said:
Here my tipp: You can go to a service center, maybe they even repair it under warranty. Or you can order a new micro usb port and replace it. Google should help you to find a seller. Depends on whether you feel comfortable enough to replace it yourself or not. Oh one more thing, I would stopp using your Note to avoid any further damage.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
r
Thanks for the quick reply!
First of all, I can confirm that no pins are broken or bent, everything looks normal, it also seems to be charging better, as I centred the metal strip in the charge port.
As for warranty, well I didn't purchase any extended warranty or insurance, however, the standard warranty lasts 2 years.
Unfortunately
The Repair Warranty Exclusions are as follows: (i) Subject to the inclusions of the applicable manufacturer's warranty, a mobile that has broken down or is damaged as a result of: (a) abuse or tampering, (b) electrical damage, moisture, dampness, oxidation, corrosion or food, dirt or liquid ingress (c) accident, neglect, impact, actual or attempted theft, fire, power outages or surges, or incorrect voltage, (d) transportation or packaging (e) removable batteries or damage caused by battery leakage
Basically, the only thing that I'm covered for is "handset breakdown"
My phone is in perfect condition, and no pins are broken or bent (as discovered on closer inspection)
So do you class charging issues as "handset breakdown" or not?
I may purchase a new charger, just in case the issue is with the charger, and not the phone,
What d'ya think?
Thanks again for the quick replies azzledazzle & nipuna, I didn't notice them until now,
Yeah I'm 90% there's no damage to the pins on the charge port, and it seems to be charging now, slowly at least,
I've centered the metal strip as best as I can, (inside the charge port)
I'll leave it to charge now for a while, as I'm not sure if it's fixed or not
Then I'll try another charger if it doesn't work
If all else fails, I'll try getting it repaired under warranty
(although that's more of a last resort, as it will take a few weeks to get my phone back)
does anyone know if the standard galaxy s2 charger will work on the note?
I don't have it on me now, although I could borrow it from a friend
I know its an official samsung charger, although not sure if it's the usb or the other kind.
I'll let it charge for a while, then I'll try transferring data from the laptop, to make sure the pins are fine,
thanks for all your help everyone,
1st of all: if you go poking around in the usb port with a metal screwdriver, take out the battery first. Not only will it avoid shortcutting and maybe blow a fuse inside the phone, but it will also protect you from an exploding battery when shortcutted !
S2 charger will work
Sent from my GT-N7000 using xda premium
I swear for as smart.and.as great as this phone is, the easiest things to fix which pose the biggest.problems arent.fixed. Having the phone plugged.in.while using.it in landscape creates huge stress.on the port. So much that the cable gets looser as the pins are bent. Stupid samsung with their.idiotic location for.ports, but I.digress... has anyone found a longterm fix for this? . I thinking like a plastic moount that clips.to.
The bottom of the phone and.encases the beginning of the charger cable to prevent any stress in any direction? My temporary solution is I rubberband the beginning of the cable in a few loops as if I have it zip tied. This prevents any minor tugging from directly pulling the port.
First of all new USB 3 port cost about $14 and could be replaced by user in about 30 min even if you don't have 1 yr warranty. You can use any USB 2 wire to charge Note 3, some are much thinner and more flexible, than the factory cable. And with at least 6 hours screen time I can't imagine running out of power before night, when I put it on charger and go to sleep, but I do have full time job and little kids so actually never had a chance to use it for 6 hrs in 1 day anyhow. Maybe you need bigger battery and if you don't like Samsung design maybe another phone, I don't see anything wrong with it, otherwise would not buy it, heard Apple is a popular brand, but never actually used it.
pete4k said:
First of all new USB 3 port cost about $14 and could be replaced by user in about 30 min even if you don't have 1 yr warranty.
Click to expand...
Click to collapse
I hate giving a reply that doesn't really help the OP, but I can somewhat sorta agree with this comment. Sorta.
Because I got the Note 3 now but haven't broken its port yet.
However I did have the Note 2 and the Galaxy S2 and there was that issue if you're careless. Sloppy plugging and stress, sometimes a few drops of water falling on the port too and shorting it, etc. Anyway, I'm very unskilled and clumsy regarding basic electronics repairs but still managed to replace the USB board on the S2 with Ebay parts. It was less than 20 USD, the board and a kit of screwdrivers. It really is very easy to replace that part if you damage the USB port (getting the infamous "charging / not charging intermittent warnings, even when the phones are not connected to anything).
I seriously doubt the N2 or N3 are much more complex. (I used repair videos on YouTube for the S2, I'm sure they will pop up for the N3 if relevant)
Not so with other components (Screen, for instance). So take some care with it and don't worry too much because even home-repair is fairly accessible and cheap in that case.
Okay let me paint you a picture..I play aot of poker. there is an outlet under the table so I have my phone plugged in sitting on the rail behind my chips as I either watch 24/7 movies or play games.but since my phone is horizontal, naturally gravity works its magic and puts pressure on the port. not only that, but the less slack I have the more pressure is applied.
so as you can see my circumstances are very specific to my regular usage of this device. hence I utilize rubber bands.sometimes.
If you guys are really concerned about the usb port on the phone being damaged, maybe something like the qi wireless charger can help.
Or maybe buying a spare battery.
Or buy a right angled usb cable
Sent from my IdeaTab S6000-F using XDA Premium 4 mobile app
so I broke the tab in the usb port in my nexus 4. I bought an induction charger but it doesn't seem to be charging the thing very well. It will sometimes turn on and I can see the battery is at 0% and it shuts down. do you think there is a chance there is a short in the port itself making it so that the battery drains itself? I left it charging overnight with no luck. What to do next? remove the port entirely while I wait for the new usb daughter board to come in the mail?
mikkowus said:
so I broke the tab in the usb port in my nexus 4. I bought an induction charger but it doesn't seem to be charging the thing very well. It will sometimes turn on and I can see the battery is at 0% and it shuts down. do you think there is a chance there is a short in the port itself making it so that the battery drains itself? I left it charging overnight with no luck. What to do next? remove the port entirely while I wait for the new usb daughter board to come in the mail?
Click to expand...
Click to collapse
I think it's more likely that the broken USB tab is causing either a short or has broken a connection the phone expects, which fools the circuitry into thinking the phone is plugged in to USB, which won't allow it to charge via Qi. You could try charging it with the daughterboard removed, but I'd be surprised if it works. Hopefully you have a back-up phone while you wait for the part, even if it's a RAZR V3 or Nokia 3310. SIM won't match, obviously, but you can probably pick up an adapter locally.
Planterz said:
I think it's more likely that the broken USB tab is causing either a short or has broken a connection the phone expects, which fools the circuitry into thinking the phone is plugged in to USB, which won't allow it to charge via Qi. You could try charging it with the daughterboard removed, but I'd be surprised if it works. Hopefully you have a back-up phone while you wait for the part, even if it's a RAZR V3 or Nokia 3310. SIM won't match, obviously, but you can probably pick up an adapter locally.
Click to expand...
Click to collapse
That makes sense. I do have an old samsung tmobile phone that lasts about 4 hours on its battery. I guess I might be using that for a few days. I'ts at home though and I'm at work. It would be nice if this thing would just work. I need to find a t5 torx wrench and scew it up more......
mikkowus said:
That makes sense. I do have an old samsung tmobile phone that lasts about 4 hours on its battery. I guess I might be using that for a few days. I'ts at home though and I'm at work. It would be nice if this thing would just work. I need to find a t5 torx wrench and scew it up more......
Click to expand...
Click to collapse
Some advice for someone who hasn't taken this phone apart yet:
First, go to ifixit and familiarize yourself with the teardown guide. There are also some youtube videos that are helpful (if you can't find them immediately, look for screen replacement guides.
Second, you'll need something thin and flat, and hopefully not with sharp edges. They make tools for this, but I doubt you'll be willing to order them and wait. Myself, I used the nail file from a keychain Swiss Army Knife. It's possible, even likely you'll cosmetically damage the plastic up a bit. If you have a hair drier (or even a heat gun), this can aid in softening up the adhesive. In any case, go slowly.
Do the disassembly over a fluffy towel. There are many tiny screws, and a fluffy towel will trap them rather than having them bounce away and disappear.
As I write this, another thought occurs to me. If you can, wait a few more days, but order yourself a new battery off eBay. Many sellers include the needed disassembly tools (including a T5 TORX, small Philips, and the plastic separating tools). Your Nexus 4 is probably 1.5-2.5 years old by now, which means your battery has had well over 500 cycles. At this point, you've lost upwards of 20% your battery's original capacity. Or don't wait, but order a new battery anyway and reopen the phone when you get it. The degradation of a battery is slow and one really doesn't notice it until that day you think to yourself "it seems like it used to last longer". Indeed, you may open up your phone to discover a puffed-out battery in desperate need of replacement anyway.
Planterz said:
Some advice for someone who hasn't taken this phone apart yet:
First, go to ifixit and familiarize yourself with the teardown guide. There are also some youtube videos that are helpful (if you can't find them immediately, look for screen replacement guides.
Second, you'll need something thin and flat, and hopefully not with sharp edges. They make tools for this, but I doubt you'll be willing to order them and wait. Myself, I used the nail file from a keychain Swiss Army Knife. It's possible, even likely you'll cosmetically damage the plastic up a bit. If you have a hair drier (or even a heat gun), this can aid in softening up the adhesive. In any case, go slowly.
Do the disassembly over a fluffy towel. There are many tiny screws, and a fluffy towel will trap them rather than having them bounce away and disappear.
As I write this, another thought occurs to me. If you can, wait a few more days, but order yourself a new battery off eBay. Many sellers include the needed disassembly tools (including a T5 TORX, small Philips, and the plastic separating tools). Your Nexus 4 is probably 1.5-2.5 years old by now, which means your battery has had well over 500 cycles. At this point, you've lost upwards of 20% your battery's original capacity. Or don't wait, but order a new battery anyway and reopen the phone when you get it. The degradation of a battery is slow and one really doesn't notice it until that day you think to yourself "it seems like it used to last longer". Indeed, you may open up your phone to discover a puffed-out battery in desperate need of replacement anyway.
Click to expand...
Click to collapse
Cool. I did end up ordering a new battery because of just that thought. It will be coming Friday though so I might not want to wait. I'll probably end up opening it up twice.. I also happened to open the phone about a 3 weeks after I bought it as somehow the screen cracked. I also have a heatgun. The phone is pretty old. I got it on release.
Hi, has anyone replaced their usb c charging port board?
I've searched some on Amazon but they are not OEM. I am wondering if the replacement will fast charge or not?
Right now my port is kinda loose and I have to position the cable a certain way for it to charge. And the slightest and smallest touch will knock the cable out. And it doesn't fast charge.
sonysingh1983 said:
Hi, has anyone replaced their usb c charging port board? I've searched some on Amazon but they are not OEM. I am wondering if the replacement will fast charge or not? Right now my port is kinda loose and I have to position the cable a certain way for it to charge. And the slightest and smallest touch will knock the cable out. And it doesn't fast charge.
Click to expand...
Click to collapse
Yes, a few people have changed the daughterboard with complete success, however I remember one guy reported fast charging not working afterwards. Bottom line seems to be "beware" and shop carefully.... just like with batteries there are some faulty replacement parts out there. At this point it sounds like you don't really have a choice in the matter. No sense taking a chance damaging your phone (further) with a loose charging port.
v12xke said:
Yes, a few people have changed the daughterboard with complete success, however I remember one guy reported fast charging not working afterwards. Bottom line seems to be "beware" and shop carefully.... just like with batteries there are some faulty replacement parts out there. At this point it sounds like you don't really have a choice in the matter. No sense taking a chance damaging your phone (further) with a loose charging port.
Click to expand...
Click to collapse
I bought mine used, so within a month I bought myself a new charging daughter card and a replacement battery. I ended up buying two. The first didn't work for me, the second replacement I did a couple weeks later with the new battery. This time it worked better. I recommend you try to find an oem part or as close to it. For me the first part was slightly different than the original piece, but the second one I ordered looked identical to the original I took out. If you have not opened up the device yet, then watch some videos of tear downs and watch closely for the daughter card so you can compare against which one you order.
replacing battery and charge port was a huge success for me
Sent from my Nexus 6P using Tapatalk
sonysingh1983 said:
Hi, has anyone replaced their usb c charging port board?
Click to expand...
Click to collapse
@sonysingh1983
v12xke said:
Yes, a few people have changed the daughterboard with complete success, however I remember one guy reported fast charging not working afterwards. Bottom line seems to be "beware" and shop carefully.... just like with batteries there are some faulty replacement parts out there. At this point it sounds like you don't really have a choice in the matter. No sense taking a chance damaging your phone (further) with a loose charging port.
Click to expand...
Click to collapse
nowell29 said:
I bought mine used, so within a month I bought myself a new charging daughter card and a replacement battery. I ended up buying two. The first didn't work for me, the second replacement I did a couple weeks later with the new battery. This time it worked better. I recommend you try to find an oem part or as close to it. For me the first part was slightly different than the original piece, but the second one I ordered looked identical to the original I took out. If you have not opened up the device yet, then watch some videos of tear downs and watch closely for the daughter card so you can compare against which one you order.
replacing battery and charge port was a huge success for me
Click to expand...
Click to collapse
Cool. Thanks for the help guys. Appreciate it.