Related
Hello everybody. Recently, I had my phone go under a repair which involved opening up the entire phone just to replaces the mini usb port, which was detached from the phone and was trapped inside, losing its ability to charge.
Now, another problem has arisen. The phone has problems charging with wires compatible with its port. When I connect to it to charge via usb, it was plug-n-go, all good. For some unknown reason, it suddenly came under the issue that I need to shift the usb up,down, left, right, and slightly bend it the inside. Now, the original charger doesn't work because it broke, leaving the usb charger as the only option. I can't understand why my HTC Wizard is having this problem,and it's very frustrating. I paid sixty dollars for the repair on the USB, and it seems it hasn't done anything except reattatch it. Any suggestions?
Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!
nandobang said:
Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!
Click to expand...
Click to collapse
Thank you for your sufficient reply. I have not tried a different cable, and I have checked the Wizard's USB. I'll have to try another cable to check if it works. Do you know where I can buy a charger for a cheap price. Thanks!
Edit: Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.
Infinity M said:
Thank you for your sufficient reply.
Click to expand...
Click to collapse
You're welcome
Infinity M said:
Do you know where I can buy a charger for a cheap price.
Click to expand...
Click to collapse
That's a hard one. I would send you straight away to eBay, lol, but I guess you can take a look at some local stores near you. It doesn't need necessarily to be a Wizard's charger. In fact, any charger for a HTC device that uses the same battery will do (the Tytn's I guess). Or you can check the charger label and see if it meets these requirements:
INPUT: 100-240V~0.2A
OUTPUT: 5V, 1A (this one being the most important of all)
Infinity M said:
Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.
Click to expand...
Click to collapse
Dude, I'm almost conving myself to make more than one, lol!
Again, good luck man!
Got myself a new Transformer. Unboxed. Looks gorgeous, but wait... the two bits that make up the wall charger don't seem to, you know, slot in? It's very loose, and when plugged in doesn't do squat all. No charge. Am I being an idiot and not fitting one piece to the other right, or do I go back to the shop to get a replacement? :/
It snaps together, and when I got mine it was a pretty snug fit. So you may have to apply a little force, but it does snap together.
Right, the problem is that however much force I apply, the thing doesn't want to snap in. I've been googling like mad to see if anyone else has this problem and did find this one chap with the same trouble; he ended up having to ask the shop to swap it.
When I got mine it was already together
I had to press with what I would deem as an 'unreasonable' amount of force to get them to snap together. Just FYI.
Lucky you. Sigh.
I've even tried to charge with my Samsung Tab's wall adapter. No goddamn luck. Fail, ASUS, fail.
grainysand said:
Right, the problem is that however much force I apply, the thing doesn't want to snap in. I've been googling like mad to see if anyone else has this problem and did find this one chap with the same trouble; he ended up having to ask the shop to swap it.
Click to expand...
Click to collapse
Can you take a pic?
I was going to upload the pics, but I followed advice given in another thread and--using enough force I thought I was about to break them--bent the prongs outward. Voila: it now snaps in and charges. Still a bit of a fail on ASUS for not shipping the two pieces already joined, or better yet make the wall adapter a one-piece affair. Ah well!
This happens to everyone. You really need to FORCE it. There's no particular technique that worked for me, just slide and apply a lot of pressure...you only need to do it once, thankfully.
yeah the amount of force required to put that thing together is insane. after about 5 minutes i grabbed something heavy and just started pounding the thing to death with it until it clicked in lol
That is the one area of the transformer that has disappointed me so far, the charging systems. I didn't understand why the unit wasn't assembled in the box... why I can't charge via usb...and why the cable is so short.
Other than those gripes, I love this thing!!
akashhhhh said:
This happens to everyone. You really need to FORCE it. There's no particular technique that worked for me, just slide and apply a lot of pressure...you only need to do it once, thankfully.
Click to expand...
Click to collapse
*giggles childishly*
nebrando said:
...and why the cable is so short.
Other than those gripes, I love this thing!!
Click to expand...
Click to collapse
Seriously the cable length is ridiculous
Sent from my Transformer TF101 using XDA Premium App
Heh, I wedged a coin between the prongs to bend them a bit. Thanks everyone for the suggestions, though.
The Samsung Galaxy Tab's cable is also stupidly short. A trend, I guess?
Mine took some force but it wasnt like i had to stand on a table to make it work.
grainysand said:
Still a bit of a fail on ASUS for not shipping the two pieces already joined, or better yet make the wall adapter a one-piece affair. Ah well!
Click to expand...
Click to collapse
I could see pre-joined but not a one piece affair. I like that its modular because that means you could get plug adapters that could make it fit any country you move to. This is how it should be with mobile devices.
grainysand said:
Heh, I wedged a coin between the prongs to bend them a bit. Thanks everyone for the suggestions, though.
The Samsung Galaxy Tab's cable is also stupidly short. A trend, I guess?
Click to expand...
Click to collapse
Apparently so is the Iconia's cable. Very strange, as if they expect us to build a little charging stand next to an outlet just for these Android tablets. Somewhat easily solved with a USB 3.0 extension cable, but it's an ugly solution (at least for me, my extension is blue).
not assembled because it's modular and different countries have different adapters. They are wrapped separately and the only variable in the box.
Also, the oem ipad adapter should provide plenty of oomph to charge and comes with a long cord from outlet to charging unit. Again, not as nice and neat as a normal two piece charger and cable, but neither as the add one. Plus, the apple one is modular too and can take a regular one piece like the one on the asus if you don't need the extension cable or if someone comes out with a longer stock cable.
Weird, mine came already assembled from Best Buy.
I do remember my GTablet came with the adapter apart, but that was easy to put together.
Hell I didn't even know it was in 2 peices, got mine yesterday from Newegg and it was already together. Yes the cable length is a joke but I heard about that earlier this week and ordered a 6 ft USB3 cable extension from monoprice for like $4 and it got here today and using it now to charge mine and it's working fine, highly recommended!
Yeah mine was pre-assembled, got mine Monday of this week (and it was brand new stock). Maybe they're doing that on the newer units. I have no idea how I'd ever get it apart if I needed to, I tried and the two pieces are very tightly attached.
The cable... yes the cable is crazy-short. So if you want to use a USB extension, it has to be a USB 3.0 one?
Hey guys, I created this thread to chronicle my attempt in fixing my Galaxy Note's broken USB dock connector.
The problem: The phone charges only when off. MTP/USB mass storage won't work. On some roms Car mode wackiness ensued. It seemed like it was possessed; exactly like another persons detail of the problem.
Attempt to fix it: Contacted three wholesalers in China at Alibaba.com for the dock connector for Galaxy Note. Waiting on response right now.
So far I have eleminated everything in my troubleshooting. I've tried multiple custom roms and went and tried two different stock roms with no luck. I also have tried plugging in different kinds of usb cables. I also tried plugging them in different computers.
Anyone can post they're problem-->solution here for future reference.
I found this on google and I thought it was very helpful. HERE IS THE SERVICE MANUAL FOR GALAXY NOTE:
http://letitbit.net/download/55297....68026c2/Samsung_N7000_Service_Manual.rar.html
http://www.samsungparts.ru/2012/01/%D1%80%D0%B0%D0%B7%D0%B1%D0%BE%D1%80%D0%BA%D0%B0-samsung-gt-n7000/#more-2963
andruyd said:
Hey guys, I'm created this thread to chronicle my attempt in fixing my Galaxy Note's broken USB dock connector.
The problem: The phone charges only when off. MTP/USB mass storage won't work. On some roms Car mode wackiness ensued. It seemed like it was possessed; exactly like another persons detail of the problem.
Attempt to fix it: Contacted three wholesalers in China at Alibaba.com for the dock connector for Galaxy Note. Waiting on response right now.
So far I have eleminated everything in my troubleshooting. I've tried multiple custom roms and went and tried two different stock roms with no luck. I also have tried plugging in different kinds of usb cables. I also tried plugging them in different computers.
Anyone can post they're problem-->solution here for future reference.
Click to expand...
Click to collapse
I am afraid there is no solution for this type of behavior at this point. I am too had the same experience.
I am awaiting for another responds email from Germany(where my Note came from) to send mine in for a repair. Until then, I can still use my Note with external battery/charger that I got from Amazon.
good luck-
Are guys plugging the cord in upside down or something? Ive had galaxy s, sgs2 and now note since release day and havent experienced this issue.
GALAXY NOTE
Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App
naimmkassim said:
Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
I can assure you it's not the charger or the data cable, as I have plenty laying around. My money is on the logic board.
naimmkassim said:
Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
After having 2 SGNote units being bricked and (luckily) replaced with a new unit everytime, I found that the root cause for the SGNote being bricked is a weak USB interface and protection circuit. At first I thought I just messed up the rooting process that's why I bricked the device. When my 2nd replacement unit also got bricked, I traced back that the only common denominator was a rogue iphone charger that I used to recharge the device. Knowing that the weakness of the SGNote is the USB circuit, I'm now careful to use no other charger but the stock charger that came with the unit.
wolfmanx said:
After having 2 SGNote units being bricked and (luckily) replaced with a new unit everytime, I found that the root cause for the SGNote being bricked is a weak USB interface and protection circuit. At first I thought I just messed up the rooting process that's why I bricked the device. When my 2nd replacement unit also got bricked, I traced back that the only common denominator was a rouge iphone charger that I used to recharge the device. Knowing that the weakness of the SGNote is the USB circuit, I'm now careful to use no other charger but the stock charger that came with the unit.
Click to expand...
Click to collapse
Yeah this makes sense.
Anyway this is the part I'm trying to acquire:
http://www.alibaba.com/product-gs/521953864/Dock_Connector_Charging_Port_Flex_Cable.html
http://www.alibaba.com/product-gs/521398121/For_Sansung_GALAXY_NOTE_N7000_I9220.html
http://www.alibaba.com/product-gs/521398854/I9220_charger_flex_for_Samung.html
I strongly believe that the Galaxy S2 USB problems are of similar nature and the solution was to replace the USB dock connector. This gives me a lot of hope since it's easy enough to do. There is no soldering involved AFAIK since it just came off during the Galaxy Note teardown video on youtube @2:28 and @3:36 (ttp://www.youtube.com/watch?v=UFDr3PQMTxw). Correct me if I'm wrong.
its definitely a hardware issue and has been traced to the usb port inside the phone. I have the same issue and I am also waiting for the part to replace the damaged one inside my phone.
here is what I am doing to make my phone function-able:
When you connect the usb cord to charge the phone you have to press it down hard and then slide it out. this will temporarily fix the physical usb port pins and allow your phone to function normally. you have to do this every time when you connect and disconnect the usb cord. I will use my phone like this until the part becomes available to buy. I have a feeling, this phone is very delicately designed and can get bricked all by itself.
My note does not charge with Three of my HTC chargers neither does it charge with another car charger.but charges fine with the Samsung charger.has sometimes issues with otg with Samsung otg cable and another otg cable. Even today when I used a Samsung otg cable to connect my note with a Samsung galaxy s2 via a Samsung USB cable, the otg features did not work, the s2 just said mtp and note said unknown device connected! So there are issues with this USB on the note.
I saw a youtube video for Galaxy S2 where he suspected that it was a malfunctioning USB dock. He replaced it and all the symptoms were gone. I'm really going full press on this and hopefully I can help myself and others who have similar problems. I've read up on USB problems the last 2 days from Galaxy Note users and Galaxy S2. They are very similar in design other than the screen/stylus.
bannork said:
I am afraid there is no solution for this type of behavior at this point. I am too had the same experience.
I am awaiting for another responds email from Germany(where my Note came from) to send mine in for a repair. Until then, I can still use my Note with external battery/charger that I got from Amazon.
good luck-
Click to expand...
Click to collapse
Please keep us updated on your progress.
BTW to the folks having USB issues, are you having unusual battery drain? What other quirks have you encountered?
Has anyone compared the shape of the USB dock connector for Galaxy S, Galaxy S2, Galaxy Nexus and Galaxy Note? I wonder if they are all the same shape and if I should try and look at replacing that part only? If it is the same then I will get this http://cnn.cn/shop/samsung-i9000-galaxy-microusb-connector-p-10745.html since it's cheap and I've got nothing to lose if it doesn't work.
Looks like we have a new design flaw here..so, how long does it take for you guys to experience this problem from date purchase your note?
Mine already 1 month purchase and not having this problem.
Sent from my GT-N7000 using XDA App
aftabbabar said:
its definitely a hardware issue and has been traced to the usb port inside the phone. I have the same issue and I am also waiting for the part to replace the damaged one inside my phone.
here is what I am doing to make my phone function-able:
When you connect the usb cord to charge the phone you have to press it down hard and then slide it out. this will temporarily fix the physical usb port pins and allow your phone to function normally. you have to do this every time when you connect and disconnect the usb cord. I will use my phone like this until the part becomes available to buy. I have a feeling, this phone is very delicately designed and can get bricked all by itself.
Click to expand...
Click to collapse
I fully agree that it is a hardware issue. Samsung should come up with an extra dongle or maybe a protection circuit integrated with the USB cable that should be used in conjunction with the SGNote. Otherwise, this issue will just keep on repeating and they will end up with a bunch of bricked units on their hands.
If only I didn't like the display on this device, I would have opted for a change item instead of a replacement unit.
I still have the rogue iPhone charger and when I use it to charge an iPhone it keeps on repeatedly bringing up the charging battery icon on and off but it doesn't destroy or brick the phone. But when I connected it to the SGNote, it bricked it. I did it on 2 units. And it will surely brick any other SGNote unit I connect this charger to. I'm willing to demo this to Samsung to prove the point of their weak USB interface circuitry.
wolfmanx said:
...
If only I didn't like the display on this device, I would have opted for a change item instead of a replacement unit.
I still have the rouge iPhone charger and when I use it to charge an iPhone it keeps on repeatedly bringing up the charging battery icon on and off but it doesn't destroy or brick the phone. But when I connected it to the SGNote, it bricked it. I did it on 2 units. And it will surely brick any other SGNote unit I connect this charger to. I'm willing to demo this to Samsung to prove the point of their weak USB interface circuitry.
Click to expand...
Click to collapse
Like you I got the Note for the screen size because I don't like to read in small screens. I haven't had a phone in 6 years!!!! I've seen phones come and go. The screen size of the Note made it comfortable enough to read anything (PDF, comics, web pages, ebooks).
How sure are you guys that it is indeed the USB circuitry and not just the metal dock? To be honest I'm not sure right now.
andruyd said:
Like you I got the Note for the screen size because I don't like to read in small screens. I haven't had a phone in 6 years!!!! I've seen phones come and go. The screen size of the Note made it comfortable enough to read anything (PDF, comics, web pages, ebooks).
How sure are you guys that it is indeed the USB circuitry and not just the metal dock? To be honest I'm not sure right now.
Click to expand...
Click to collapse
Oh my! Looking at the charger flex assembly pictures, all I see are a bunch of passive components for protection. I see no active components on this board that would likely be used for over-voltage or over-current protection. I'm not sure if it's on the main board though. But normally protection circuitry are placed right next to the connector for them to be effective. There seems to be a lot of space on the board for even a single-chip USB protection circuit but the space hasn't been utilized for such.
I'd be willing to bet you that your problems will still be the same even after replacement of this flex assembly.
wolfmanx said:
Oh my! Looking at the charger flex assembly pictures, all I see are a bunch of passive components for protection. I see no active components on this board that would likely be used for over-voltage or over-current protection. I'm not sure if it's on the main board though. But normally protection circuitry are placed right next to the connector for them to be effective. There seems to be a lot of space on the board for even a single-chip USB protection circuit but the space hasn't been utilized for such.
I'd be willing to bet you that your problems will still be the same even after replacement of this flex assembly.
Click to expand...
Click to collapse
Well I hope you are wrong or else I'm screwed over an $800 phone. Did you see that in the Service Manual? I've linked the service manual on the first post. QME02 is the part I want to replace.
naimmkassim said:
Looks like we have a new design flaw here..so, how long does it take for you guys to experience this problem from date purchase your note?
Mine already 1 month purchase and not having this problem.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
For me it was a month and a half before it started going crazy.
bannork said:
For me it was a month and a half before it started going crazy.
Click to expand...
Click to collapse
For me, about 5 minutes after I plug-in the rogue iPhone charger... I did it twice... and luckily, since I still have warranty, I got both units replaced.
I strongly suggest for everybody not to use any other USB charger apart from the stock charger that came with the SGNote. Of course, this excludes plugging it into a PC or laptop as they should be fairly safe and well-protected (at least for name-brand units).
If you're going to use the stock charger, I would recommend plugging the USB cable in the charger and plugging-in the charger in the wall socket first BEFORE plugging-in the mini-USB connector to your SGNote. This minimizes the chances of having voltage spikes being transmitted through the USB connections into the SGNote, especially during the actual plugging of the charger to the wall socket. This is to be on the safe side in the case that the stock charger design is also flawed and doesn't prevent transients from reaching the load unit itself.
Is there a website or something from which we can call Samsung's attention on this matter? If indeed transients are the cause of the USB problems then all they need to do on the SGNote is to redesign the USB board assembly and stick it into units that have not been affected yet. This entails a product recall or as I mentioned in my previous post, maybe to offer us SGNote buyers a dongle or a USB cable with the protection circuitry.
---------- Post added at 11:05 PM ---------- Previous post was at 10:53 PM ----------
andruyd said:
Well I hope you are wrong or else I'm screwed over an $800 phone. Did you see that in the Service Manual? I've linked the service manual on the first post. QME02 is the part I want to replace.
Click to expand...
Click to collapse
Yup on the service manual and on the links to alibaba that you provided on your previous posts. I looked at both sides of the sub-assembly and only found passive components.
Well I'm using a 2 amp charger from ebay for charging downstairs; a HTC 1 amp charger in the bedroom; the 1 amp Samsung charger in work, but I also plug it into the 800 mah charger that also charges an extra battery in situ. ... she's till working fine.
Right now, usb mass storage or MTP is totally non-functional for me. I'm still glad USB charging is working. I hope that parts holds up till I get a replacement for it.
Thank goodness for wireless and FTP!
...Play dead.
We all know how brilliant a design the charge cord adapter is, I myself am on to my third one in almost two years. Well, the tablet stopped charging today and no matter which wall outlet I used or how much I wiggled the lead I could not make the light come on. Seeing that my Verizon contract is all but done at the end of this month and rather than buy another charge cord I decided to buy a new tab. I just picked up the new Asus Transformer Infinity, not too bad so far. Anyways, about 20 minutes after getting home with neither tablet charged to a useable level, the power goes out for a couple hours- just my luck too. When the power came back on suddenly the light on the Xoom came on. I hadn't touched it since I gave up on trying to get it to charge. Now here I am with two tablets and a $500 hole in my pocket. I know I was bound to get a new one eventually so I'm going to hang on to it but I never saw it happening like this.
Has anyone else had any issues regarding their chargers? Or anything unusual occur in general? I'm sure I'm not alone.
Ouch I would hate to folk out another $500 dollars for a new tablet even though my old one still works. I don't use my tablet for any intensive apps like games, so a new one would be pretty pointless for me. I never had any issues with my charger, well one time one of my charger did blow up, but that's because the battery was faulty for my jump charger for my car. Other than that, you might have some dust in the charger pin hole? Just a guess really.
I'm on my third charger since March. Original Motorola one died, second one (off eBay) burnt out, current one (off eBay) still working but I can't use the touchscreen while unit is charging.
I live remote using an off-grid power supply so this may have something to do with it.
Chelseablue said:
We all know how brilliant a design the charge cord adapter is, I myself am on to my third one in almost two years.
Click to expand...
Click to collapse
Huh. I have four of them, from the original back in Feb '11 to one I was given a few months back, and they all work perfectly- and most of 'em are used every week (two at home, one in the office, one for travel).
agreed with kcrudup, ive been through 2, the only reason being i snapped the connector on the first one when i pulled it out at a bad angle
The charger that came with my refurbished Xoom lasted almost through the first charge. I thought I was going to have to send the whole thing back until I took it into the Verizon store and verified that it charged with a different charger. I've since got one off eBay and another with the standard dock. Both have been holding out so far.
Oh and my Xoom touch screen doesn't respond while charging either. Somewhere I read that a factory reset will fix that... but I'm waiting until my 90 day warantee is up to put EOS on it since my BT mouse works while it is charging.
ByteWrencher
My original charger is still working and I got my tablet 8 months back. I think the charger has lasted pretty well. How long did peoples original ones seem to last?
ByteWrencher said:
Oh and my Xoom touch screen doesn't respond while charging either. Somewhere I read that a factory reset will fix that
Click to expand...
Click to collapse
That's an electrical problem (noise and/or grounding issues with the charger raise the "noise floor" so the touchscreen controller has trouble determining what's a valid touch) and can't be cured by any reset, factory or full or ...
Your issue is your charger- try another.
xoom chargers
Chelseablue said:
...Play dead.
We all know how brilliant a design the charge cord adapter is, I myself am on to my third one in almost two years. Well, the tablet stopped charging today and no matter which wall outlet I used or how much I wiggled the lead I could not make the light come on. Seeing that my Verizon contract is all but done at the end of this month and rather than buy another charge cord I decided to buy a new tab. I just picked up the new Asus Transformer Infinity, not too bad so far. Anyways, about 20 minutes after getting home with neither tablet charged to a useable level, the power goes out for a couple hours- just my luck too. When the power came back on suddenly the light on the Xoom came on. I hadn't touched it since I gave up on trying to get it to charge. Now here I am with two tablets and a $500 hole in my pocket. I know I was bound to get a new one eventually so I'm going to hang on to it but I never saw it happening like this.
Has anyone else had any issues regarding their chargers? Or anything unusual occur in general? I'm sure I'm not alone.
Click to expand...
Click to collapse
Just a quick note.. I've had the ebay sourced chargers fail on my xoom ( and other devices). I found that the power ratings on some of them are rather optimistic... they simply are running at the outer limits to charge the tablet and failure can be internal to the power unit...best case.. or worst case failure dumps overvoltage or raw AC power to the tablet.
Fortunately my failed units were of the internal power supply version.. and aside from bad smells no real damage was done.
I have successfully built charger/power units after scavenging the connector from my failed power supplies and using a minimum 1.5 amp 12v dc supply... they seem to work fine.. and keeping one handy is much more convenient than wondering where I last used it :fingers-crossed:
as always.. your mileage may vary
Hmm, that's interesting. Unfortunately this charger is from Verizon and i would surely hope that their stuff work to the correct specs. I wonder sometimes that maybe the problem could be with the contact inside the tablet. Could that have something to so with it?
Chelseablue said:
Hmm, that's interesting. Unfortunately this charger is from Verizon and i would surely hope that their stuff work to the correct specs. I wonder sometimes that maybe the problem could be with the contact inside the tablet. Could that have something to so with it?
Click to expand...
Click to collapse
I think the Motorola/Verizon chargrs are good. I think the earthing issue is with the cheap chargers from China.
When I lost my cellphone charger I had to buy a Chinese one, well, when charging it looked like possessed by the Devil itself lol! The screen started acting strange and I wasn't able to control it... Then I found my original charger and the exorcism was complete lol^2! BTW, a guy on X10 mini pro community (one of the best developers I ever met - my favorite one ) lost a cellphone with a Chinese charger, so what can I say - be careful with it!
Sent from my MZ601 using XDA HD Premium using 1/8of my brain, the other 7/8 is thinking in my love Isadora
This phone did, intermittently, work. But it also behaved as though there was a short somewhere in the system. Now it will not power on, and I am making a leap of logic and assuming that's because it cannot charge the battery. (I've tried every single suggestion here re powering it back on, so let's move past that option.)
I note that on ebay and elsewhere there are internal charger port cables (3rd party unfortunately) that are inexpensive (as low as four or five dollars, or eight dollars for one with a small tools set). Has anyone ever used one of those third party internal charger port replacements and had success?
Thanks in advance.
Okay, I have gone ahead and ordered one of the internal USB ribbon assemblies for my OnePlus 2. But I haven't seen anyone else discuss having actually done a change-out of this part. Isn't there any hardy soul armed with spudger and screw driver who's attempted this?
shonkin said:
Okay, I have gone ahead and ordered one of the internal USB ribbon assemblies for my OnePlus 2. But I haven't seen anyone else discuss having actually done a change-out of this part. Isn't there any hardy soul armed with spudger and screw driver who's attempted this?
Click to expand...
Click to collapse
i replaced the charging cable it is easy quick fix, ordered one from aliexpress
arjan.bongers said:
i replaced the charging cable it is easy quick fix, ordered one from aliexpress
Click to expand...
Click to collapse
If you don't mind me asking, did the phone work at all right before the replacement? Mine is a dead as a doornail, which is why I wonder. The fix does look to be easy (I watched some videos and even removed the old one, so the new install is all ready to go).
shonkin said:
If you don't mind me asking, did the phone work at all right before the replacement? Mine is a dead as a doornail, which is why I wonder. The fix does look to be easy (I watched some videos and even removed the old one, so the new install is all ready to go).
Click to expand...
Click to collapse
He didnt charge thats why i replaced the connector. but the rest of the functions were normal
arjan.bongers said:
He didnt charge thats why i replaced the connector. but the rest of the functions were normal
Click to expand...
Click to collapse
Well, we shall see if that solves my completely non-functioning phone issues or not. Perhaps this thing is just dead. My ebay seller is behind schedule as far as delivery goes, but again I will post here whatever the outcome once I do replace the usb port and ribbon.
I did promise to post a video of my install. I do not know if this worked yet (charging a newer battery; if that doesn't work I'll go back to the old battery and try again). But here is the video, which I ended up sorta having fun doing.
https://www.youtube.com/watch?v=INZUBsXXTFE
Well, I'm marking this down as a fail. The install was easy, but the phone remains dead, dead, dead. Not a whiff of life to it. The short, if it is a short as I suspect, may be in either the motherboard or daughterboard. So, not being one easily driven off by failure, I bought a working but very bent up OP2 off ebay for 70 bucks. The idea being to take its innards out and put them into the frame (and the I think working screen) of the one I have. I'll look either brilliant or the fool (I play the second one better). I will, as usual, report back.
So... said I'd follow up on the $70 ebay phone buy (the phone very bent up but somehow still working). I did get it, tested it (it did work but screen was under obvious pressure due to bend), then removed the motherboard, usb ribbon cable, and daughterboard from it and moved them into the non-working phone I was given by a friend. And it worked!! I now have a OnePlus 2 phone which is updating the rom at this moment. I'll probably root it and put a custom rom on later, but for now I just wanna see what the phone is like with the standard setup. Anyway.... it was fun to take a phone apart (2 phones, actually) and succeed at the end.