i have problem while unlocking my magician PM10A.
i was resetting radio to v 0.00.00 with MaUpgradeUt_noID.exe
and it stops at 3% and says: ERROR 144 : RADIO ROM UPDATE ERROR
what shoul i do?
I was getting the same error, SD flashing did the trick for me.
Try this guide (skip USB flashing):
http://forum.xda-developers.com/showthread.php?t=514864
Related
Hello everybody,
i wanted to update my new HTC Polaris with another radio rom. It failed during Update process.
After that, it doesn't boot anymore. Now it stays in "3 colour mode". USB is recognized, when i plug in. I've tried to update again and again, but it stays at 0% and then i get an " Error 262". Tested with XP and Vista, no luck.
Any idea, how i get my device work again, don't want to RMA...
(Sorry, for my bad english, i hope you understand.)
Did u try to flash the official ROM again?
At the moment, there is no original Polaris GER ROM in DL section. I've tried O2_ger, Bepe, no luck.
Try the WWE version available in this forum. Once recover, flash the hard SPL and then flash whatever u desired.
Hope this can help!
i tried, but i get an "ERROR [294] : INVALID VENDER ID" at 1%. I think i need the Original German Rom...
Put the device in bootloader mode then flash with HARD-SPL
After SPL flashed put it again in bootloader mode and flash a rom that you want.
It is already in Bootloadermode = 3 Colour Mode.
When i try Hard-SPL Flash, it also hangs at 0% and give Error 262.
I've also tried, rename *.nbh file to POLADIAG.nbh or POLAIMG.nbh. Here it hangs in the Loading screen. Used Micro-SD formatted as FAT32.
I'm having the exact same problem.. did you manage to work it out?
why did I have to update the rom....??
damn
Did you try this?
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
thank you very much! it worked!. sigh!
many many thanks
help!!i really no idea with my devices as i try to flash it to wm6,then it stop at 50% and reboot then hang at bootloader screen,i try to flash again but when it reach 1% it will restart and update error msg prompt, it said "the image is corrupted" if im using sd card flash,it come out 00068002 on the top of the"loading" words then go in the tri colour screen again. anyone pls help me pls!!!!!!!!!!!!
Man I wish you guys would do a LITTLE research on how to flash stuff... I bet you don't have Hard SPL installed even though its splashed about all over the forum.....
Try to download the SHIPPED STOCK ROM again... It seems you have a corrupted download.
Once you have downloaded the rom, then reset Hermes into TRUE bootloader, not the failed flash you are getting.
On the PC, untick "Allow USB connections" in active sync the connect Hermes.
Double click on RUU_Wrapper.exe of the freshly downloaded rom. Follow prompts...
Pray......
Then, if it works, INSTALL HARD SPL V7...........
thanks for rely brother,i hv tried download a shipped rom from here and i hv follw all the prosedure u thought,it still doesnt works,oh no....................
Error 226 flash write
Hello friends i'm italian and sorry for my english.
I have a problem with my hermes200.
I have flashing on my tytn a rom kitchen using "package tool by bepe" with nb IPL, SPL, Mainsplash, Subsplash, ExtROM and GSM extrated from original rom htc tytn wm6 and a OS.nb extrated from rom kaiser ITA wm6.1.
When the flashing is termined the hermes don't start: push power botton but the screen is black and only green light is ON.
I have flashed original htc hermes wm6 but i have "error 226 flash write" when the process is at 89%.
I have IPL-1.04 and SPL-2.04. CID.
SPL 2.10, SPL 2.20, SPL 2.30 are not possibile to install.
i have try command with mtty tool:
- task 32 -> FF
- task 28 -> format storage success
- task 2a -> fix bad block
- info 8 -> much bad block Os Win CE
I've try to reflash the original rom but the problem is the same
The battery don't possibile to charge and level should be of 40%.
Help me please....
Tanks!!!
At 1st I run onlipro hardspl1.1 for p3600i after that sync ur pda the will send u to the bootloader screen when install fail after that unpluck the pda and the restart the romupdateutility and last the HARDSPL successfully install inside.
WHEN GO INTO THE BOOTLOADER YOU WILL SAW
TRIN100
IPL-1.00
TRIN100
SPL-3.20.Olipro
After that using same method go bootloader upgrade the radio version 1.56.70.11 also install succesfully
While going to bot the ROM inside through bootloader then run update utility
once starting to upgrade the rom 1 % shown the the pda auto disconnect and error message 270 shown
wth is this problem i read tons of comment but it is totalli invain
is there a diffrence between using window xp sp2 , sp 3 and vista
HOPE SOME PRO can help me on this issue i test all the ROM also same 1 % auto disconnect
ORIGINAL HTC ROM
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship
AFTER CHANGE
HARDSPL Olipro 3.20
Radio 1.56.70.11
ROM stil maintain the same offical rom no way to change please help =(
Hi guys,
my Orbit failed in the middle of a flash (in Windows with RomUpdateUtility).
Now I can only get to the bootloader, nothing else.
I think the CID unlock must have failed somehow, because using the SDcard method I cannot flash any cooked ROM. In fact I cannot flash ANY ROM now! I have tried the default shipped 02 ROM's but they all fail at 5% in RomUpdateUtility.exe thru windows, and also fail via the SDcard method (it sits there forever saying reading SD card).
Any ideas? Any other O2 ROM's I should try? Or can I send it for repair to any one off this forum? Should I bin it, maybe the flash chip is faulty?
IPL 1.25.0001
SPL 1.25.0000
Tried (and failed) ROM list:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
RUU_Artemis_O2_UK_3.4.206.2_4.1.13.28_02.67.90_Ship.exe
HTC P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R.exe g
Arteimg.nbh from http://rapidshare.com/files/41614347/OrbitO2UK.rar
art_htcwwe_11240501_026790_wwe_ship from http://www.expansys.com/ft.aspx?k=79618
Vanilla 4.01
Black & Blue 5.0
Thanks for reading, underzone
I have the exact same problem only mine is stuck with IPL 3.04.0001 and SPL 3.04.0000
When i try the original rom (o2 factory) it goes at 4% into Error 226 (something with the Extrom), any other rom wont work since no USPL... damn it.
Any Ideas on this?
it's a G4 device and it has HARDSPL on it. I succesfully flashesed several roms and I wanted to update the radio rom. I flashed the Radio 2.71.11 witn the RUU 2.5.2 and it stucked for about 15-20 min. On the computer it was at 72% and on the mobile was at 70%, I disconected the cable and I wanted to try with another radio. What can I do now? Now it enters in bootloader and when I try to update the radio again it gives the 264 error connection.
now it works, I installed active sync again and now the radio upgrade ended well