Database Users

8525 Touchscreen Has Gone Crazy

Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?

aroundlsu said:
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
Click to expand...
Click to collapse
on your touchscreen problem.. i have seen this occur by someone improperly putting on a screen protector or maybe there is some dirt up there.. and if you take it back to the store they may give you a new one or make you call the warranty by mail line and get a replacement that way

..... or your OK button could be stuck down

I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!

kevino said:
..... or your OK button could be stuck down
Click to expand...
Click to collapse
good point, i had that problem once also, forgot all about it

aroundlsu said:
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
Click to expand...
Click to collapse
Just a note of caution!!! This is related to the screen alignment issue i.e. the touch sensitive area of the screen continuing beneath the bezel and causing unwanted touches whether through dust or the sticky gasket in there.
May not return, or will be cured again by the "business card" fix / or as you did a firm clean to release the screen from touching the bezel.
But, it's a question for you, if you only have 5 days left under warranty. Most people with the SA problem find the first signs appear in the first couple of weeks. I would certainly put it through it's paces, open up a few applications leave wifi on so it heats up, surf web over wifi etc etc as the added bit of heat generated internally was a known factor in exacerbating the problem. If all stays well over next couple of days maybe it'll be OK.
Would be good to get urgent feedback from anyone with a newer Hermes who's had this issue and what happened.
Mike

Argh, it's back. OK, I'm certain it's a touchscreen problem and not a button sticking as holding down OK will not cause the start menu to pop up while an application is up and holding the windows key will not close an app. Also the problem is delayed if I hold the stylus down on the screen. It's just the upper right (portrait mode) of the screen that is getting the errant screen tap (about three or four times a second).
I've ran a business card through the edges and it doesn't help. I'm not going to take this thing apart. I did that several times with the 2125 to fix unresponsive keys and joystick but the problems always reappear. My one year old 2125 is barely functional now. My g/f would rather keep her crap LG flip phone then inhieret the 2125 after watching me battle it. That's pretty sad.
I'm going to try a hard reset (second one in three weeks) and if that doesn't help I'm returning it to Cingular and getting my money back. Then I'll either buy another one or a blackjack. I like the 3g and love this device. It's my third Windows Mobile 5.0 product. I don't like the sub-par build quality on my second HTC product now. I paid $599 plus tax for this phone at a local Cingular store (despite the web store saying $550).

My advice for what it's worth is take it back. This screen business has a habit of coming and going and it's entirely possible you hard reset and everything is fine and two weeks later it's back. Also would be better to return with the issue present (not that they wouldn't believe you -would they?)
On the whole though this problem is much more rare than it was, so if you do get the same device again hopefully you will be luckier. If you get directly from shop though check the firmness of the key board clicking into place that seems to still be fairly common problem.
Not the best start to the new year!!
Mike

Well I got desperate and hard reset... I could barely get past the screen alignment startup so needless to say that didn't fix things. Having gone this far and thoroughly pissed at having to reinstall everything I decided to loosen those screws on the back and run a card around the edges.
So far, it's working! I'm not content settling on this hack though so I'm bringing it back Tuesday and will update on my experience at the retail store (not looking forward to that).
Happy new year and thanks for all the super fast responses guys!

Alignment
I was browsing the www the other day and saw a korean/ japanese site showing the inside of these precious devices, and (as pointed out above) how the seal/ gasket underneath the bezel is the root cause of our anguish.
There were some detailed pics of how you can DIY, and remove the gasket, but it's no where near me basic level of competency.
Why would they design a touch-screen to big for the device I wonder???

there is also the business card trick about sliding it underneath the edges to loosen the gasket... there is a whole thread on this screen alignment issue

what site shows how to fix the gasket?
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??

johniz1967 said:
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
Click to expand...
Click to collapse
Look down this page. Keep in mind non of the theoretical solutions is guaranteed/
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Mike

Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.

Good news and you're absolutely right about getting it back within warranty if there's a fault.
Great stuff!
Mike

aroundlsu said:
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Click to expand...
Click to collapse
since your appears to be new from 12/26.. i am curious what firmware is on that phone.. details please

Cingular 8525 touch screen no working
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?

Hey there, I have had the problem before (about 3.5 weeks ago). I had to send it in for service (since I am not a Cingular customer anymore but use the 8525 with T-mobile).Good luck.
wedgesurfer said:
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Click to expand...
Click to collapse

Touch screen not working

I'm sorta new and not exactly sure how to submit questions.
I installed the SPB mobile shell on my elfin htc and now the touch features don't work and my phone won't sleep without what appears to be the backlight on. Can someone provide some directions on how to fix this? Can't get to the bootloader either.

if you reset your device, can't it boot up into windows mobile?
if it boots up, why not connect it to the pc and try removing the last app through activesync?
if there isn't anything that important on the device, did you think of a hard reset?

Thanks for the quick response, however, I did do a soft reset, the screen is not responding (completely frozen). I've already removed the program, I thought was the culprit (spb mobile shell). I did a backup, but without touch features, I can't restore backup. I can't do a hard reset that's not working properly either. Any additional ideas, I'm at a complete lost.

Hi
Touchscreen of my HTC Touch (P3452) stopped working. I tired following:
- hard reset
- hard reset successful, then It asked me to tap the screen for alignment then I tap, it worked but on Calibrate screen where you align your screen touch is not working. nothing is happening after that even power button is not working. my Touch is not hanged coz if I touch the screen after It goes to sleep, the backlight will turn on.
So I though may be something wrong with the original ROM, then I tired flashing it with cooked ROM's but nothing worked.
I am still stuck at calibiration screen
-
Plz help, I miss my HTC Touch (P3452) so much!!!

If your touchscreen is not working, there could be only 2 solutions.
- Get a digitizer off dealextreme.com
- Hard reset device.
my $0.02.
Cheers.

What's a digitzer and what does it do? I've looked in cell phone accessories and did a search on dealextreme.com, however, unable to locate such an item. Can you provide a little more detail. Desperately trying to get this phone to work and right now this appears to be the only solution. Hard reset isn't working.

toot-b said:
What's a digitzer and what does it do? I've looked in cell phone accessories and did a search on dealextreme.com, however, unable to locate such an item. Can you provide a little more detail. Desperately trying to get this phone to work and right now this appears to be the only solution. Hard reset isn't working.
Click to expand...
Click to collapse
Come on, Google man!
http://www.dealextreme.com/products.dx/category.506~search.htc touch digitizer
Digitizer is a 'panel' which is above the LCD, which senses where your hand is at on the phone.
Something like this:
http://en.wikipedia.org/wiki/Graphics_tablet
It is just something which sense where is your fingers are in the touchscreen.

Hi toot-b:
I had a similar problem a few days ago. My screen stopped working completely. I gave it a few taps and a squeeze and it started working.
After a while it stopped working again and did not respond to the squeezing too. Then out of desperation, I tried searching the internet. One guy had given the most idiotic explanation I've ever come across.
He had advised to take a blade and peel away the LCD screen and after taking the screen away, to rub the copper contacts with the blade and then putting it back in!!!
Well, I was really really desperate and I had to try it. I didn't remove the screen completely. I just took the screen off a wee little bit on the bottom right corner near the camera button. I kinda got scared after that and put it back in.
To my surprise, the touch screen started working perfectly and till now its doing great. Try it at your own risk. All the best!!!!

theo2409 said:
Hi toot-b:
I had a similar problem a few days ago. My screen stopped working completely. I gave it a few taps and a squeeze and it started working.
After a while it stopped working again and did not respond to the squeezing too. Then out of desperation, I tried searching the internet. One guy had given the most idiotic explanation I've ever come across.
He had advised to take a blade and peel away the LCD screen and after taking the screen away, to rub the copper contacts with the blade and then putting it back in!!!
Well, I was really really desperate and I had to try it. I didn't remove the screen completely. I just took the screen off a wee little bit on the bottom right corner near the camera button. I kinda got scared after that and put it back in.
To my surprise, the touch screen started working perfectly and till now its doing great. Try it at your own risk. All the best!!!!
Click to expand...
Click to collapse
Do you have some photos to show us?
Cheers

Major touch screen problem with touch hd!!

touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff

Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?

I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....

I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse

download and install this _HTC Touch HD_TouchHD system.exe

BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??

I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something

ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated

the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell

doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?

unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.

Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards

igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you

Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards

igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...

Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards

firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn

hi buddy ! What you mean GSensorCalibrator ??

i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn

Does anyone have a recommendation where you can buy a digitizer and lcd from?

Nexus 4 Touchscreen Problem Please Help!

Hey fellas ,
I cracked the screen of my Nexus 4 and installed a replacement.
It's been approximately a month now.
Sometimes when i restart the device the touchscreen doesn't work and i have to restart it again and again until it starts to work. I noticed that when i put one of my fingers anywhere on the touchscreen (around the display not the bezels) , it starts to work and recognizes only one finger whereas i have two on the display , when i remove one the touchscreen doesn't work again. So , i have to restart sometimes just once sometimes a lot of times to get it to work.
I have intricate knowledge of the touchscreens and how they work but i can't put my finger on this problem. It looks like a capacitance issue because when i put two fingers it recognizes one , sometimes it needs 3-4 fingers on the screen to recognize only one.
My original one still works but has a bad lcd (colors are all messed up) because my clumsy attempt to repair it resulted in failure , i tried it and the original one works without a hitch. The only thing i haven't tried is to remove the battery. I installed everything when the battery was still on , the screws are too flat for any of my screwdrivers. But i hotplugged the original one and it worked. So , that's probably not the problem. I just shut it down with 3 of my fingers on the screen. Waited for it cool down and then reopened it , it worked. Whether this is a thermal issue or not , it needs further testing on my part. I'm currently not willing to find out because i just had to restart 5-6 times to get it to work and i need it to work constantly for the next couple of days.
I can't return this because i already got a full refund and the seller didn'T ask for a return , he said to keep it. He advertised it as genuine but it was aftermarket. So , this assembly was free folks. I broke it and got away with it. We gotta get this working without any problems so i can sell it when nexus 6 comes out.

disconnect touch,power on phone without touch,disconnect battery.After that connect touch and power on your phone:good::good::good:

same problem here...
And I see the problem at a lot of other forums too... no sollution... have you found a workaround?
I'm too late to ask for a refund...

[solved] Yotaphone 2 front screen touch input no more working

Hello,
Since a few days, the touch input of my front (LCD) screen stopped working. Nothing looks damaged, the screen still displays what it is supposed to, but there is no reaction to my inputs (actions on volume and power buttons do work, as well as on the e-ink screen). Did this happen to any of you? Any suggestion on possible ways to fix it?
I should also mention that it still works by moments, like half a day working, then 2 days not responding, etc. I tried shaking it in different ways should a connector be slightly displaced, with no success: the few times it started working again came like a (good) surprise. I also had the great idea to do a factory reset, so now the phone is stuck on the Android configuration wizard, which must be done on the front screen (no possibility to use YotaMirror, apparently).
Thanks!

wicoz said:
Hello,
Since a few days, the touch input of my front (LCD) screen stopped working. Nothing looks damaged, the screen still displays what it is supposed to, but there is no reaction to my inputs (actions on volume and power buttons do work, as well as on the e-ink screen). Did this happen to any of you? Any suggestion on possible ways to fix it?
I should also mention that it still works by moments, like half a day working, then 2 days not responding, etc. I tried shaking it in different ways should a connector be slightly displaced, with no success: the few times it started working again came like a (good) surprise. I also had the great idea to do a factory reset, so now the phone is stuck on the Android configuration wizard, which must be done on the front screen (no possibility to use YotaMirror, apparently).
Thanks!
Click to expand...
Click to collapse
i recommend reflash it. possibly and more strongly recommend to flash the same version and region which was installed for example HongKong 4.4.3 baseband number .HK1.0.36a
ftp://fw.ydevices.com/YotaPhone2/Firmwares/

Actually, I forgot that the front screen was replaced several months ago (by a repairer that mistakenly changed the front screen instead of the e-ink one which was having an issue).
The factory reset didn't improve the situation, the front screen becoming "touch-insensitive" every few days. After checking how the screen connectors are supposed to be plugged (opposed to the screen), I noticed that gently tapping the phone front screen down helped to solve the issue each time it happened. A few days ago, I finally opened the phone (quite easy, there are two useful videos online) and unplugged/replugged the screen connector. It has been working fine since then.
If it happens to anybody (who would have its front screen replaced), I hope it can help!