HI Friends
Sometimes it happens that all internal memory is full and after we do a reset , magician nearly hangs either on the boot screen or while trying to show the Today's Links on the main screen
Is there any way to boot the magician with the least resources like safe mode in windows. As i dont have the recent backup of my magician, so i dont want to hard reset the magician which will work but on loss of data.
I tried using active sync, windows 2003 doesnt come to a point where, active sync start.. if it would hv worked i could hv deleted the big file which is creating the booting issue.
Pls help...
I tried
I Dnt know if this helps...
Use file explorer and go into windows directory of your device.
There should be a program called : safemode
Load that program and the Pocketpc will retart, while restarting a small window will be displayed, and press the middle button while this is up to load in safemode and not load any plugins you might have installed.
Hope this is enough.
Hi can anybody help i have a 6915 tht i have tried to upgrade from spannish to english .Everyhing seemed to go fine but at the end had to hard reset now its stuck on hp logo screen. Now i have tried various fixes for this but to no avail. I cannot even connect to it via activesync.ive tried leaving battery out all night.Ive also tried the uni_exitbootloader but as i said before i cant even connect to it.Is there any other way of connecting apart from the cradle?Ie
perhaps some sort of serial cable or perhaps booting from sd card or something.I really am fed up as you can imagie as i think i now have a 600 euro paper weight lol.
Anyway if anyone can help or pehaps point me in the right direction it would be really apreciated .phil.
no joy
its still the same has anyone else had this same fault.
regards phil
Yup.... mine is also stuck on HP logo.... nothing is getting the sucker out of it at the moment...! If i manage to get it goin, ill let u know.... but if anyone else knows a way around this...... PLEASE let us know! Havin major hassles getting mine to an english OS......
help still
anyone have an answer to this or is it a brick regards phil
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Need help
I fail ungrade OS
I got stuck in HP logo and not connected ActiveSync
I think i must boot from mini-SD card.
Please someone help me!!!
WOOOHOOOO
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Sulphy said:
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Click to expand...
Click to collapse
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
3circles said:
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
Click to expand...
Click to collapse
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Thank you guys
It worked!!!!
I change it English too
Thanks a lot!!!!!!!!!!!!!!!!!!!!!
Hi Sulphy,
Many thanks for your guide! Mine ok now!
You are really a good man!
whooooooooo hurrraaaaaaayyyyyy
tried it and it works 100% even radio . You dont know how happy i am .regards phil. Thanks spgi
Same Programme for HP 614C Posible?
My HP 614C not boot SD Loader not Works
Any GSM fixes yet??
Hey people¬!
Glad to hear that some got thier phones back and workin.... although, has anyone got the NO GSM sorted yet please? I have tried a few 'fixes' out on the forum to no avail!
please let me know if you got your GSM sorted.....
As for the 614, i dont think this fix will work.... i dont have a 614, so cant help out much there....!!!!
If i get my GSM sorted, ill do a full rom dump and post.....! So, anyone, please let us know!!
Cheers
Sulphy
Flashing
If you do not know what you are flashing, do not flash it. Do your research before you flash anything.
We have alot of hw69xx bricks because of this, including mine.
I have to this day only fixed 2 "NO GSM" phones, I am asking anyones help to fix others.
Post in my thread "OFFICIAL hw6900 NO GSM FIX FOR SOME PHONES / WM 6 PORT "
Thank You
Error 501
spgi said:
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Click to expand...
Click to collapse
Error 501, os...
Help!!!
hi
i have the same serial, hp logo, vG.39 problem, i want to repair it but with spanish languaje, can anybody helps me?
when appears serial in the screen , must i plug the pda to the pc with serial cable to repair it or usb cable?
thanks
Hello...this is my problem too...my hw6915 screen: hp+ logo...
I probed this solution:
"1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english...."
but this is the end (see the attachments)...
What my problem? Help please...
Ooops...this solution working on xp, not working x64 Vista...
THX!
Working...!
yes ,it is vevy good
Sulphy said:
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Click to expand...
Click to collapse
yes .thanks...............
Hi guys,
2 days ago, I was playing with my trinity, installing some software, and when I restarted my device, it would load my today screen, let me make phone calls/messages, but would not allow me to access the program or the setting folder!
I tried connecting it to my PC, so I could use active sync and eventually flash the whole device (n.b. I could not use "clear storage" since I can not access the settings folder), but active sync will tell me I am connected as a guest and would not allow me to access the device. As a result the flasher returned an error messaging saying that my device did not respond.
I know I can press the power + camera button and enter manually to the tricolour screen, but I have read that doing so and running an executable file from my PC will result to bricking my phone.
I think what I need is to manually flush the rom with the tricolour screen, but i am afraid I do not know how. Can someone help me with this, or maybe suggest a better approach to this problem?
Also note that I am currently using Mary v3.7 LITE.
Thank you in advance
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
hotdevotchka said:
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
Click to expand...
Click to collapse
Did you turn off the device completely? I would remove it from the power, remove the battery, and give a 10 to 20 secs and put battery back and boot it.
Let me know if you have issues.
To restore it to Vista, if the recovery partition is not swiped, just press Fn+3 at the boot time and once it goes into recovery, and just follow the steps.
didn't work....
I tried removing the battery, nothing happened
When I press Fn + 3, it just goes on and starts Windows XP normally (the xp "half" works allright - it's the comm and snapvue which are dead )
Any other idea? Is there any hope ?
oww, now it's really nasty!
I insisted on pressing the FN+3 , and after one or two questions (if I wanted to continue etc) it said "invalid data on recovery partition" - and now the screen just shows black and there's no winxp anymore - I suppose I should write some commands, as there's a white line blinking....but I don't know how to do it.....Heeeelp!
If XP has been installed in place of Vista, then the recovery partition has been wiped, so FN + 3 will not work for recovering Vista.
The Vista (or XP) side and the snapvue side are two totally different entities, so you can wipe the hard drive and snapvue will still work, as it lives in ROM.
So you have 2 separate problems, you need to re-install an OS, and you need to find out why snapvue is not booting.
I managed to enter the bios ( pressed DEL) and it says that hard drive Toshiba etc is "disabled" - so no wonder it can't boot...
Could I do something to enable it or whatever?
Or should I give up ?
Hi,
Who installed XP for you?
Since you need to now 1 or 2 things about computers to do so, I think that person is the one who can help you and do it the quickest....
Other wise you need to post a message after every step and then wait for one of us to respond.... that would take days if not weeks....
Given your name, I guess you don't live near Enschede, the netherlands do you?
Otherwise You could come by and I could give it a go....
greetz,
Pfeffa-rah
no, I live in France at the moment! But thanks for the offer anyway!
I guess I'll just take the thing to a repair shop or something
As for my name, it's "Clockwork Orange" inspired - I'm a great fan of the movie, although I'm French.
No comments regarding the guy who installed the XP! We must keep this discussion civilised!
Thanks a lot , everybody!
Howdy...please advice in the following prbl...
my trinity refuses to start...
- when i charge it, it charges...shows red / green led
- when i try to start it, only backlight shows and no display, but it doesnt sound aswell;
- tried soft/hard reset...nothing
- yet from time to time it shows me the display to restore all setings by pressing the send button (the message is shown on 3/4 colours - so it ain`t the lcd)
- the pc doesn`t see it ....
Any suggestions!?....Thanks in advance..
UPDATE
I can see the device in usb mode .. it shows me as beeing after pressing the keys required for bootloader Windows CE USB Devices / HTC USB Sync and when resetting / starting it the usual way it shows me Windows CE USB Devices/ PocketPC USB Sync.... yet activesync doesn`t see it ... and no display ...
Should i try to write a software...and which one?... does it fit from 3600 to 3600i? ...and how do i recognize which type it is? ....the colour is black...
Thanks
Put it in bootloader, flash a stock ROM and see if that fix it.