BT Headset Error: Music yes / Phone no - MDA II, XDA II, 2060 General

Hello,
I have a strange error when using the Bluetooth headset with my XDA 2i:
When I receive a call, I can accept it via the headset button, ending the call with the same button works as well. However, I can neither hear the other party nor can they hear me talking.
Strangely, when no call is in progress, listening to music via the headset works fine.
When using the BT headset with some SIP Phone on the computer, both loudspeaker and microphone work, so the error seems to be on the XDA 2i.
I have a XDA 2i with Windows Mobile 2003 SE, the headset is a HAMA BTH 150. Since this combination used to work, I assume some "newly" installed software causes the malfunction.
Here is a list with installed programs that might have something to do with it.
VJvolubilis
Mortscript
SJ Labs SJ Phone
Fonix VoiceDial
Skype
Any ideas, which program or what else might be causing this behavior?
Or which program can be excluded from the list?
Many thanks in advance,
wiojima

Problem solved by performing a HardReset followed by restoring a former working image. All the programs as well as the BT audio issue work fine again.
Personal data was of course saved before and restored afterwards

Related

Dopod 818 Pro Voice Command Bluetooth Activation Problem

I've got a problem with Dopod 818 Pro's voice command software.
The software that is use is Cyberon VC 1.6, which is different from Jamin's Voice Speed Dial 1.1
Using Jamin's Voice Speed Dial 1.1 (I've flashed Jamin's rom), I can use bluetooth headset button to activate and dial very successfully every time.
However, when using Dopod's software (Cyberon VC 1.6), I can only activate the voice command once using my bluetooth headset's button. After that I cannot use it anymore and have to reboot the Dopod in order to make it work again. I noticed that after the headset is turned on, it never turns off again using this software.
I'm using a SC HBH-662, 818 Pro AKU2 WWE.
Do anyone experiences this problem? Is it a problem with my Headset instead of a software problem. (I'd need to consider replacing my bluetooth headset). If everyone is experiencing this problem with Dopod, then I think it is probably a software problem, or there are any registry setting that I can use to fix it?
I have noticed the same problem, though not everytime. It seems that if you use the software to dial a phone number, and then end the call, the headset shuts off and may or may not work again with voicecommand.
Anyway, yes, it's weird. I'm using a SE bluetooth headset as well, but I think it's software related.
Anyone not using Sony Ericsson bluetooth headset having the same problem? If yes, I think I'll just downgrade it back to imate rom.
Same Here!! I just loaded the new Dopod ROM and selected the few files from Ext ROM that I wanted and noticed that Cyberon Voice Commander worked once with the bluetooth headset (nxZen) then refused to work after that. Hopefully some genius here can help figure this out. Cyberon's VC seems really good, just need it to work over bluetooth.
voyager
Jabra headset same problem here.
AX2 and Plantronics Voyager same issue. I think it is similiar to the issue people are having with MS Voice Command on the Wizard using the Reg hack to redirect the BT Headset button to activate VC
I'm having the EXACT same problem, with the same headset (hbh662). Interestingly enough, I installed MS Voice Command side-by-side with Voice Commander. Once you activate Voice Commander the first time (and it makes the audio gateway connection to the BT headset), you can use MS Voice Command to issue commands through the headset. The problem is that it seems to only be able to do this once, and then you have to reset. The other thing I've noticed is that all audio is rerouted through the headset; if your phone rings while the BT gateway is active, you will only hear it in the headset (but you get to hear Voice Command anounce the caller). Ah well, at least it works for about 10 minutes per reset. :?
I have exactly the same problem with you guys with my SE HBH-610a and i.Tech Clip R35, and some other SE and i.Tech models which I have also tried. Can only activate once, and will not work again until a soft-reset. This has been like that since the shipped ROM, and the new ROM didn't fix this problem.
Voice command over BT on the i-Mate AKU2 rom works great though, and works 100% of the time!! Though both from same company Cyberon, the one on Dopod is VOICE COMMANDER, and the one on Imate is VOICE SPEED DIAL.
I have tried un-installing Voice Commander from my Dopod and installing Voice Speed Dial (from hack in this forum), but didn't get voicedialling over BT to work this way on the Dopod. Sigh!!
Has anyone contacted Dopod on this matter? If I-mate can implement Voicedialling over BT correctly, I don't see why Dopod can't!! I will write to Dopod. Can't imagine calling their hotline again...the last time I called, I had to wait at least 50mins before my call was answered.
Peter
Still no solution for this?
Still no solution for this issue? Isnt there a way to port/convert Project VCABT to the Prophet?
That would be more than great"!
I have the same problem plus it does not recognize my voice command. Alway dials a wrong person. :evil:
Any progress?
Dear Friends,
Has anyone had any progress with this issue? 3-rd party software? Maybe some bluetooth stack patches.
Please, if anyone has any valuable information to share, please do.
With warmest regards...
there is a major problem with the ROM
Until a new one is produced the BT will be stuffed

btaudio for a regular bluetooth ear piece...

anyone got this working on the tytn
I use it with a Jabra BT250...
it used to work with my plantronics 320 on the wizard but wont work on the tytn is there any special settings you had to do
I also tried to make it works and it doesn't I assume that is due to the different headset plug.
Waiting for a version for TYTN
the prog will open a connection to the earpiece i can hear the static just wont forward any of the audio to it. works with the phone of course for making calls
I have the same problem with my Tytn (BTaudio seems to work because it stops the radio - I use it with a parrot car kit) but the audio still goes through the phone speaker...
did you find a solution?
gb
BTAudio On does not work, you have to turn it on via button press on the headset. BT Off works fine of course...
Rather annoying, but that's the way it is...
Sorry but I am afraid not to understand... the bt car kit is working properly and is paired to the qtek
could you please be more specific?
thks!
Sorry, you stepped into a rather cryptic response... I assumed you were talking about the file BTAudioOn.exe that worked on the 8125 but not the 8525/TYTN.
Search this forum for mono audio - there's a big thread. Also check the wiki.
attached. This cabs works great. To activate it, start playin music, then push and hold the button on your BT headset for about 1 second, it should beep and then music comes through. Only problem is you can't use MS VC through your headset, but it doesn't break VC.
BTaudio cab works
I have used the Gotland cab file and still had problems, until I began to think like a technician... Once I installed the cab file, I performed a soft reset and then repaired my Jabra JX10... It has been working fine ever since... I can hear music (either streaming or static) and voice... I have not tried tackling the voice commander problem though...
I have just upgraded the firmware on my headset using the software that is not posted on Jabra's site, but through a link in another post, I was able to do it... had to reinstall the Gotland cab again though.... May tackle Voice Commander later in the day... Who knows...
I'm using Bluemusic 2.0 and it worked with music to BT headset. Also using installed the BT VC fix cab in this forum at it worked fine with VC 1.6 - except incoming anouncements. ( Installation Hint: after installed both - you must delete existing device and then re-pairing the BT again).
I just made a thread, here http://forum.xda-developers.com/showthread.php?t=306363

Skype and Bluetooth headsets

I have a Vario II with Skype installed.
I realise that Skype recommends that you use the supplied headset when using the product for calling (rather than the speakerphone) but I was wondering if I can use my Bluetooth headset instead of the wired headset?
Bluetooth works fine with ordinary phone calls so I sort of expected it to work with Skype (doesn't the phone just see a Bluetooth headset as a standard headset once a partnership has been established?) - but it doesn't appear to work.
Am I missing something or does Skype for Pocket PC not support Bluetooth? And, if not, why not?
Skype probably doesn't use BT Headset profile. They probably should. But look at how long it took MS to make Voice Command work with BT and on our phones it didn't even work. I bet A2DP stereo headsets would work since it is an audio sending profile and not related to calls but you wouldn't be able to use the MIC except for the one on the phone. This might be enough functionality someone could try if they haven't already. However, there is the utility that someone wrote for the Samsung SCH-i730 that redirect all audio to the BT headset. There is no reason it shouldn't work on any PPC that uses the Microsoft BT stack. So try it out and see if it works.
http://pdaphonehome.com/forums/391448-post1.html
You need to create shortcuts to the toggle executable to make it easy to use.
There is a reg entry that will allow you to patch all sound to a BT headset.
HKLM\Software\OEM\VoiceCommand
LaunchAPEnable should be 0 instead of 1. Once done the headset hardware button will be remapped to connect to the device instead of launching voice command.
You will still be able to press the button to answer calls, it just won't initiate voice dial for new calls.
I would suggest one of those small freeware that allow to remap the hardware button (my button right softw key's been remapped to display a full program menu, that includes the voice command). I'm using a program called New Menu for Windows Mobile 5.
Hope this will help,
Sam
Can anyone share if they have any other methods to use BT with skype?
bsica said:
Can anyone share if they have any other methods to use BT with skype?
Click to expand...
Click to collapse
sorry for the bump... but if this can somehow work it would be a godsend... any ideas oh wise ones?
read my previous post.
To toggle Audio to A2DP you might want to see:
http://forum.xda-developers.com/showthread.php?p=1485391#post1485391
It's an easy way of switching audio to the headset and back to the device. This is for A2DP only.
hey guys,i was hoping for a different thing..is it possible to change the sound from the loudspeaker to the small speaker?? like using a real phone instead of using earphones..i dont have any earphones or bt headsets for the moment so i was hoping that someone can help me out here..its annoying if ur using skype while other people can hear the person you are talking to..
p/s:i've search everywhere including this forum,but still no solution..
No. Apparently it's a flaw in WM: it doesn't give apps access to the phone speaker.
that's a shame..hope microsoft will consider this for their future product
Bluetooth does work with Skype
bsica said:
Can anyone share if they have any other methods to use BT with skype?
Click to expand...
Click to collapse
Try www.Fring.com it has the Skype, MSN, ICQ in there they're all work with the bluetooth. (check the setting after the installation to allow bluetooth headset)

HELP...Bluetooth Headset disconnects after ending a call

Hi everyone
I have Eten M700 with WM6 ..
I tryed couple of bluetooth headsets (regular, not stereo) and i was able to pair all OK & make and recieve calls
I was even able to divert all sounds to headset to listen to my music (using either btIO or Blue Music)
I also have MS voice commander 1.6 US & it works through bluetooth without problems
I still have one problem:
when i end a phone call (touching red screen dialpad button or by hardware button) or even by waiting for the person on the other line to hang up..then my headset disconnects (i do not see the headset icon on top right of dialpad) and on the next phone call i have to restart pairing by pressing the headst button (it should start automatically & not disconnect)
i do not have to enter pairing code but it is still one extra step that i did not have to do with other phones..also, i miss some calls because when it disconnects i may not hear my phone speaker ringing as i will be away or driving
Does anyone else have the same problem?
Any fix (software, cab or reg tweak) out there to keep the bluetooth headset connected and paired inbetween calls (not disengaging after a call ends)
Thanks
I have the same problem, though i use my DS-220 as a wireless stereo also , i have no problem using it as one or another (handsfree/stereo headset) but as soon as i'm listening to something and i answer a call, sometimes, the headset disconnects itself after a call and i also have to push the button on the headset to connect it again - but not every time, best solution to resolve this problem for 70% of occasions was to uninstall Microsoft Voice Command 1.6 which was messing up with the BT on my phone, since it uses the handsfree's talk/end button as it's own "engage" button, but still, sometimes, this error occurs
I was wondering, if someone of u has working BT Widcomm or any other better BT stack (better than the microsoft bull*hit) and would mind PMing me the link, I could try it out and see, if that's the solution
BT new fix needed
This dsconnection has been happening with me even before MS voice command installation
i did not notice difference with it installed, i am alble to make commands without bluetooth droping & i give my commands through the BT headset without any registry hacks (read something about people having to give commands through phone speaker not headset) i do not have that problem
my only issue is the dropped connection after finishing a phone conversation (by ending a call or other side ending it)
I need a good developer to fix that & also, maybe work on dr.Yar BT software that shows sender/reciepient ID and file progress. that software shows blank white pop-up window when recieving files from some devices.. maybe also add a clickable line to make BT discoverable or hidden to the menu list there
i use BT only for regular mono headset & file transfer, i route music to my mono headset with BlueMusic v2 sometimes too.
If these 2 issues are fixed im all set (droped with calls & ID/progress blank window in Dr.Yar)
Thanks for looking
nothing
no one has solution for this???

Anybody got MS VoiceCommand / BlueAudio to work?

I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.

Categories

Resources