Hi all,am from VN
my G1 after i had start my g1, the screen shown: t-mobile logo, it can not continue,
i don't know how!
Please help!!
Thank pls.
Have you performed any hacks/modifications to it?
I had this yesterday, (If you have mod'd it) I wiped in the recovery I reloaded the updated radio from htc, then flashed to jf. I had this when i tried to come from the dudes build to jf 1.5.
turnoff, hold home and power together, when triangle appears press alt and L, then on next screen press alt and w to wipe, this should help.....
Related
hi my new dopod has a problems
after soft reset it struck on HTC BOOT Screen
i hard reset it using 1]camera button 2]connection 3]reset
and press green key
but stiil struck on HTC screen
please i want om update
thanks
Hi, u might try this
step 1
camera + connection + reset
step 2
hold camera + connection, just release reset only
step 3
still hold camera + connection + green button
should be ok, there is mistake on the manual, the way u do should be still performing soft reset, I think
ok i tried that ant it says format complete but still stuck on HTC
tried rom update but error 260
please help
what is the send button ?
A black screen tells me "press send button to format".
but i don't know what the send button is...
help !
send buttom is the "green phone" buttom
in other word, the buttom you make call...
I recently flashed my opal to wm 6.5 and it worked perfectly fine. Yet today when I tried to install a software which would help display chinese character, after reboot, it got stuck in the smart mobility screen. I have tried hard reset and it didnt work. HELP ME!!!
you can still hard reset it in that state... do the usual hard reset, press both green and red buttons at the same time and with the stylus press the reset button at the back and release it. don't release the green and red buttons yet, release it when you see the instruction "This operation will delete all your personal data blah blah"... then just follow the on-screen instructions.
If TheRem's solution doesn't work you can reset the phone while holding down the Volume down key and it will take you to the SPL (tri color screen). from there you can plug in your phone to USB and flash PhamQuangs ROM again.
Double Post
Closed.
Dave
please guys l really need help from you guys. l have t-mobile htc arte110 and when powered on it hangs on and it can't boot on.
spl 1.13
please could some help me to make it boot and come to its original state?
thanks a lot help me out........thanks.
I couldn't understand if it turns on or not,
does it show the first screen? if yes you can try a factory restore..
T-Mobile Germany? UK? NL? ...? you will need to know that to know which ROM to flash with your locked SPL.
Flashing a NEW Rom:
Try by pushing and holding REC + POWER buttons,
Then press and hold for a second RESET
Release RESET, but keep REC + POWER held
3 colours screen will appear.
Try flashing your official T-Mobile Factory Rom
your SPL is locked, so just the original factory rom can save you.
Have a look here for more details
http://forum.xda-developers.com/showthread.php?t=638038
Good luck
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
when you say crashing, can you give a bit more info? is it locking on a cirtain screen? or in a constant reboot?
you may want to also read through a few of the stickys as if you use the search you most likley will find the cause.
RE: HELP!
More info would be appreciated but I've had issues before and did this:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
From that my phone turned on and I was able to create an activesync connection again to flash another ROM.
__________________
Blog: jonathanstowell.com
Rasheduddin said:
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
Click to expand...
Click to collapse
I flashed many roms and never experience like that as long as you do it as per instruction/ guide in the relevant ROM.
I would suggest you to go into bootloader screen (turn of you phone, then press vol up and down together with the power on button).
Install HSPL (only if you havent installed it), perform task 29, flash the radio (check the radio version required by the ROM), and flash the ROM you want.
Everytime the process reach 100%, you press the vol down button to go into bootloader screen so you dont need to pull out the battery or the cable (but for the last process (flashing the rom), you should press vol down and up together (it will go to hard reset). And for better result, please make sure your battery above 50% and use win xp.
Hope you can solve it.
I was wondering if anyone out there can help me.
Im currently using Magloader Version 1.11 by cotulla 2010 and i would like to upgrade to MAGloader Version 1.12 so that i will be able to run Windows Phone 7, though i can't do this because in order to upgrade Magloader i have to be connected to Windows Mobile Device Center and i cant connect to it since im running NAND Android not windows mobile.
Can anyone help me ? Thanks!!
Isaac
Read
Look at this thread
http://forum.xda-developers.com/showthread.php?t=912416
You install MAGDLR 1.12 the same way as you installed MAGDLR 1.1.
Read through the forums and use some common sense.
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
shovels said:
Hopefully a slightly more helpful response...
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Thank you so much for your help ! Will try to do asap, so once i enter the bootloader screen windows will detect my phone and i can update my Magloader ?? Thanks a million for your time and help !