I got an 610c with FW 0.76, and it seems not capable to upgrade the radio using the ordinary HP tools, it wait in the boot loader forever without flashing anything. I can flash the OS part by SD Card, is it possible to flash the radio using SD Card too? Thanks.
Tatchan said:
I got an 610c with FW 0.76, and it seems not capable to upgrade the radio using the ordinary HP tools, it wait in the boot loader forever without flashing anything. I can flash the OS part by SD Card, is it possible to flash the radio using SD Card too? Thanks.
Click to expand...
Click to collapse
Hi,
What ROM you have installed ? Normally the full HP radio upgrade does work without any problem.
Dirk
I also would like to know how to flash the 0.89 firmware with SD card, as my usb port is out of order ( can not charge and can not be detected).
dirlan2001 said:
Hi,
What ROM you have installed ? Normally the full HP radio upgrade does work without any problem.
Dirk
Click to expand...
Click to collapse
I installed the latest 6.5 with SD card, and the HP tools just tell me there's a communication error(timeout) when I try to flash anything using USB
Tatchan said:
I installed the latest 6.5 with SD card, and the HP tools just tell me there's a communication error(timeout) when I try to flash anything using USB
Click to expand...
Click to collapse
Hi,
Look here
Dirk
Related
I was trying to flash my TMO Pocket PC to 4.01 ENG and it locked at PRG 003C0000 and reset back to the bootloader. I thought it was just the card so I went to my backup and got the same thing so I popped my card into my reader/writer and tried to flash using the TMO original 3.14 and same thing again.
Is my XDA dead?
Please help me out.
use a different card
and is your flash card big enough to hold 32M?
a card that says '32M' can usually only hold about 29M or 30M of data. which is not enough for rom flashing.
I have tried 2 different cards, they are both 128MB's
Maybe you should download a new rom and try writing that to a card.
I tried the TMO original from Yorch, a 4.01 cooked rom and the official 4.01
decepticon said:
I tried the TMO original from Yorch, a 4.01 cooked rom and the official 4.01
Click to expand...
Click to collapse
Confirming this is your first ROM upgrade on that unit? If so what boot loader version is it running?
HTH
I have upgraded 3 or 4 times via both Activesynch and SD card flashing with no problems, bootloader 5.15
Anyone?
Help?
your flashrom have problem.
send to T-mobile for service, if it is still in warranty.
or send to me to repair!
Hi everyone, I'm using an Asian O2 XDA and was running the 3.20.06 OS. I messed around with the ROM from Yorch's kitchen - the T-Mobile WM2003 upgrade, version 4.00.21.
My current problem is that I am unable to flash back to my previous version of ROM, or any other versions. My O2's running the version 6.22 bootloader and I have been unable to get it to boot from the SD card despite many attempts. Anyone out there that has managed to solve this problem ??
Regards
Maybe...
I dont know but maybe u need to use fixboot from XDAtools ?
it should help but i dont really know cause i didnt have such problem...
Boot loader 6.22 doesn't detect ROMs on SD cards. Try the XDAtools with any cooked ROM from the kitchen here and it will update your boot loader to 5.15 which doesn't have this restriction.
I've tried flashing the ROM using XDATools but the it kept giving me a message that the connection was reset by the device.
Is there something that I'm doing wrong ??
Try connecting your device to the PC and sync ... then from the XDAtools directory run this command:
pnewbootloader.exe bootloader_v5_15.nb0
oldwrym said:
I've tried flashing the ROM using XDATools but the it kept giving me a message that the connection was reset by the device.
Is there something that I'm doing wrong ??
Click to expand...
Click to collapse
XDATools won't work for flashing under T-mobile 4.0.21
cgigate said:
oldwrym said:
I've tried flashing the ROM using XDATools but the it kept giving me a message that the connection was reset by the device.
Is there something that I'm doing wrong ??
Click to expand...
Click to collapse
XDATools won't work for flashing under T-mobile 4.0.21
Click to expand...
Click to collapse
Is there any chance to get the XDA back to flashing?
Hi all !
I have a CID-unlocked Artemis.
Tried to flash O2 English WM6 ROM today.
Now i'm stucked on boot screen.
Is it possible to perform a reflash via BootLoader ?
SD method did not work. I copied the ARTEIMG.NBH file to SD, but bootloader does not see it.
Anybody can help ?
Try this link this may help you
http://forum.xda-developers.com/showthread.php?t=311447&highlight=MTTy
If you are sure that the phone is CID unlocked, you should be able to download any rom's from any of the network operators and reload it from the bootloader. then you can try to upgrade WM6 again
In order to SD Flashing your SD card must be formated at FAT32
Pocha said:
In order to SD Flashing your SD card must be formated at FAT32
Click to expand...
Click to collapse
I'm really a stupid one ! Thanx ! I've tried with FAT16....
i installed MAGLDR111 on my hd2 WinMo to install the Nand Andriod rom, but after installin the MAGLDR111 while rebooting it gave the white screen with the HTC logo and froze,and now it is dead even icant do a hard reset nether i can't turn it of....plz help me i don't know what to do.DID i lost my divice
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
yz.hd said:
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
thx it worked but after reinstalling the stock rom it comes again to what happend first.
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
pietme said:
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=623283
you deserve a medal
Thanks
Just a quick question...I want to install HSPL 2.08..which rom do I need?
tidus18 said:
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Click to expand...
Click to collapse
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
at004 said:
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
Click to expand...
Click to collapse
You need to provide more details. Which build are you using? Did you change the kernel, if so, did u copy the modules as well? Also, have you tried formatting your SD card using the panasonic SDHC card formatter? (It may seem trivial to format, but broken file system will prevent android from mounting your sdcard)
Hi everybody!
At the moment I am using a Android NAND rom on my hd2.
However, due to damage to my phone I need to install the original windows, radio etc. so that my insurance will pay the coste of repair. Sadly, I do not know what my original settings are. How can a retrace them?
Kind regards,
Bojan v Wijk
bojanvwijk said:
Hi everybody!
At the moment I am using a Android NAND rom on my hd2.
However, due to damage to my phone I need to install the original windows, radio etc. so that my insurance will pay the coste of repair. Sadly, I do not know what my original settings are. How can a retrace them?
Kind regards,
Bojan v Wijk
Click to expand...
Click to collapse
Perform a Task 29 then simply flash a stock WinMo rom viz SD card method...this resets back to stock WinMo and SPL (removes HSPL as well)..
Flash the correct stock rom, if you're using a t-mo HD2, flash a t-mo rom, and so on and so forth.
I cant get task29 to work, says it needs htc sync which i have!
When I try to install the stockrom (from HTC Site, renaming it LEOIMG.nbh) using bootloader it does not work either.
I get the coloured screen and it keeps saying serial and doing nothing!
What to do now?
Well, task 29 worked, however I could not install my stock rom using the sd card method, just installed it via bootloader connected with usb and it worked.
However, for my insuarance to be effective I also need a stock spl, where can I get that?
bojanvwijk said:
Well, task 29 worked, however I could not install my stock rom using the sd card method, just installed it via bootloader connected with usb and it worked.
However, for my insuarance to be effective I also need a stock spl, where can I get that?
Click to expand...
Click to collapse
Run HSPL.exe....Select stock spl...flash away
voncrane said:
Run HSPL.exe....Select stock spl...flash away
Click to expand...
Click to collapse
Thanks it worked, all back to factory settings now