Guys,
I've have a Qtek S200 (upgraded with Dopod 2.15.13.27 universal english rom) and I'm having problems getting a GPRS connection for WAP browsing with SFR France. I've set-up my connection with what I think are the correct APN settings and whenever I launch my browser the conneciton comes-up OK. The problem is that IE cannot locate any pages that I enter.
I think this is down to either some other parameter that I'm missing, a DNS issue or a problem with SFRs WAP site not recognizing my device. I've tried setting with and without a proxy server (195.115.25.129) and this makes no difference. In fact when I connect I cannot ping this server anyway.
The settings I'm using are:
APN: wapsfr
Proxy: 195.115.25.129
Cellular line: GPRS
username: none
password: none
domain: none
Addressing: dynamic
DHCP: dymanic
I'm using Hudson Mobile's IP Dashboard to monitor my connection and I get a valid IP address. Normally something like 10.277.143.81 but when I try to ping the proxy server I get a request timeout.
I've also set-up a different APN connection for MMS and this is working OK.
Has anyone got a suggestion on what the problem may be?
Thanks,
Tony
(if possible, english replies only as I'm still mastering French)
fixed the problem
I found a solution. For SFR, you need to set the HTTP proxy to port 8080 instead of the default which is port 80.
SFR also requires a proxy for WAP (port 9201) and secure WAP (port 9203). The proxy IP address is 195.115.25.129 for all three protocols.
The bad thing about all of this is that the SFR Web site does not provide this information. They just advise you to set the APN to wapsfr.
Does anyone know the MMS settings for att sim and a 8525?
Thanks for the help.
Maddog468 said:
Does anyone know the MMS settings for att sim and a 8525?
Thanks for the help.
Click to expand...
Click to collapse
Yup you needing all of it (Data and MMS setup) or just MMS?
I have the data.. I believe it's just "proxy" Also I do have the MMS settings but they do not work it never sends...This is what I have
Server AWS MMS
Gateway 10.250.250.100
server address http://mmsc.mymmode.com
Port 9201
Connect via My isp
Are these right?
These settings worked on my K-Jam, but not on my 8525 (mms settings only)
Thanks
Maddog468 said:
I have the data.. I believe it's just "proxy" Also I do have the MMS settings but they do not work it never sends...This is what I have
Server AWS MMS
Gateway 10.250.250.100
server address http://mmsc.mymmode.com
Connect via My isp
Are these right?
These settings (mms settings only) worked on my K-Jam but not on my 8525
Thanks
Click to expand...
Click to collapse
Connect via Secure WAP Port 9201
Also have you defined 10.250.250.100 under the proxy settings for WAP and Secure WAP ports 9201 (WAP) and 9203 (Secure)?
Also have you defined 10.250.250.100 under the proxy settings for WAP and Secure WAP?
I'm sorry I don't know where to change these settings. How do I do this?
Thanks
Maddog468 said:
Also have you defined 10.250.250.100 under the proxy settings for WAP and Secure WAP?
I'm sorry I don't know where to change these settings. How do I do this?
Thanks
Click to expand...
Click to collapse
Start
Settings
Connections
Connections
Set up Proxy Server
Both boxes should be checked leave proxy server blank
Advanced
thanks for the help but still no luck.
under proxy settings:
both boxes are checked
proxy server is blank
under advanced
http
wap is 10.250.250.100 port 9201
secure wap 10.250.250.100 port 9203
socks
under mms settings
server
server name aws mms
gateway 10.250.250.100
port number 9201
sever address http://mmsc.mymode.com
connect via secure wap network
sending limit 600k
Are these right?
thanks again for your help
Maddog468 said:
thanks for the help but still no luck.
under proxy settings:
both boxes are checked
proxy server is blank
under advanced
http
wap is 10.250.250.100 port 9201
secure wap 10.250.250.100 port 9203
socks
under mms settings
server
server name aws mms
gateway 10.250.250.100
port number 9201
sever address http://mmsc.mymode.com
connect via secure wap network
sending limit 600k
Are these right?
thanks again for your help
Click to expand...
Click to collapse
On mine I have sending limit 250k and WAP Version 1.2
I have that on my k-jam, but not on my 8525, it does even give the option to change the 600k or wap 1.2
again thanks for the help
Maddog468 said:
I have that on my k-jam, but not on my 8525, it does even give the option to change the 600k or wap 1.2
again thanks for the help
Click to expand...
Click to collapse
Just to make sure you can surf the internet via Internet Explorer to both www and wap pages?
When you try to send does it try to connect? Mine if I am connected to regular Data asks if I want to switch to Secure WAP before sending.
I can surf via explorer and get onto secure web pages, but unable to send any mms messages.
Thanks
These are the mMode MMS settings I use....
Server name: MMS (don't think this matters what you call it)
Gateway: 10.250.250.100
Port: 9201
Server address: http://mmsc.mobile.attwireless.net
Connect via: The Internet
Sending size limitation: 250k
WAP Version: WAP 1.2
Hope this help.
I do not have the option to select wap 1.2
Here are the choices:
media net
my work network
my isp
work
secure wap network
the wap network
the internet
does anyone know why or what I did, not have wap 1.2 or 2.0 as an option?
thanks
while using wifi
how can i use socks5 or https proxy with browsers
any idea?
how can i set proxy for wifi
i can not access the web as i entered proxy settings only access to local network!
http://forum.xda-developers.com/showthread.php?t=690963
it worked for me
I need help understanding why my SSH tunnel connection isn't hiding my public IP address no matter which SSH tunneling provider I use. Psiphon Pro VPN app cloaks my IP just fine though.
Moto G4+ Android Nougat 7.0 (rooted), Google Chrome app, SSH Tunnel 1.5.6 app
I made successful SSH connections using accounts with the following free SSH providers: www.sshagan.net, www.fastssh.com, www.freevpn.us
Example setup:
Host IP: x-usa1.sshservers.us
OpenSSH port: 22
Username: myusername-freevpn.us
Password: ********
Use SOCKS proxy: enabled
Local Port: 1984
Global Proxy: enabled
Enable DNS Proxy: enabled/disabled (both worked with same results)
When I use the IP address site at www.expressvpn.com/what-is-my-ip (or any other such site), it always displays the same public IP with or without SSH tunneling. Can someone advise me as to what I'm doing wrong? Any help appreciated. Thanks.
I was able to cloak my IP by using the ProxyDroid app in conjunction with the SSH Tunnel app as follows:
Configured and connected SSH Tunnel as above
Configured ProxyDroid as follows:
- Host: 127.0.0.1
- Port: 1984 (same local port used with SSH Tunnel)
- Proxy Type: SOCKS5
- Global Proxy: enabled
Connected ProxyDroid
My IP address at https://whoer.net was now different from my public IP.