Database Users

Multi Media Messages O2 EXEC

I have set my exec phone up to non o2 settings (by taking the battery out before it started to load the o2 settings after a hard reset)I have everything working mobile internet etc apart from mms, I have set up the mms settings as per the o2 website but when I take a picture and try to send it mms the phone freezes and I have to do a soft reset, I am not that bothered about mms but I was wondering does it not work because the o2 settings are not on the phone ??
any way around this , I do send the odd one if it cant be got to work id rather have a fast phone than a sluggish one....

mancuk29 said:
I have set my exec phone up to non o2 settings (by taking the battery out before it started to load the o2 settings after a hard reset)I have everything working mobile internet etc apart from mms, I have set up the mms settings as per the o2 website but when I take a picture and try to send it mms the phone freezes and I have to do a soft reset, I am not that bothered about mms but I was wondering does it not work because the o2 settings are not on the phone ??
any way around this , I do send the odd one if it cant be got to work id rather have a fast phone than a sluggish one....
Click to expand...
Click to collapse
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201

apd said:
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201
Click to expand...
Click to collapse
I have the MMS and My Work Network settings set up correctly , where do I do the o2uk 3g settings ?? - I have no o2 rubbish on my phone and i pulled the battery after a hard reset before the o2 stuff loaded so I have set the internet settings from this forum , I presume the o2 internet stuff goes in the my isp settings ??
I have blackberry unlimited data on my exec I presume that the above which is different from the settings I found elsewhere on this forum
CONNECTION Mobile Web
MODEM CELLULAR LINE (GPRS 3G)
ACCESS POINT mobile.o2.co.uk
USER NAME O2web
PASSWORD password
then the same dns and alt dns ??

apd said:
Did you set up the settings for My Work Network as well as the O2 mobile internet? Also, have you checked the IP addresses and gateways carefully?
The appropriate settings for MMS are:
MMS:
Server Name O2UK
Gateway: 193.113.200.195
Port 9201
Address http://mmsc.mms.o2.co.uk:8002
Via My Work Network
Size 100k
Wap 1.2
My Work Network settings:
O2 Active
Cellular GPRS, 3G
APN: wap.o2.co.uk
user o2wap
p/w: password
Advanced: Server Assigned IP address and DNS
For completeness, the O2UK 3G settings are:
Connection Name: O2 Internet
Access Point: mobile.o2.co.uk
Username: faster
Password: password
DNS: 193.113.200.200
Alternative DNS: 193.113.200.201
Click to expand...
Click to collapse
Many thanks, I haven't been able to get MMS working & I had O2 give me the settings.

only a suggestion but call o2 and find out if your still provisioned for gprs mobile web etc, as sometimes the settings just dissapear from there system for your account, this happened to me a couple of times .
also have a look at http://forum.xda-developers.com/showthread.php?p=1200467#post1200467
might help.

Can't send MMS on 8125, HELP!!

For some reason my Cingular 8125 isn't able to send MMS but I am able to receive. I've been on the phone with cingular for like 4hours and they weren't able to solve it. And of course they can't replace cause the phone is 2 months out of warranty.haha I've gone through all of cingular and the settings are exactly what they are suppose to be.
My MMS settings,
Server Name: Cingular MMS
Gateway: wireless.cingular.com (I've also tried 66.209.11.61)
Port Number: 80 (also tried 1080 and 9201)
Server address: httpp://mmsc.cingular.com
Connect via: MEdia Net
Sending Size: 300K
WAP Version: WAP 2.0
Media net connection setting,
I got CSD Cingular that dials 14152441012
And then I got Cingular GPRS:
Cellular Line (GPRS)
Access Point: wap.cingular
Username: [email protected]
PASSWORD: CINGULAR1
advanced I have "Use server-assigned IP Address"
checked also is "Use IP header Compression"
Proxy settings: wireless.cingular.com and both boxes are checked
It's exactly what Cingular tells me. I've heard that it could be the phone. But I know it's not, it's gotta be a setting that is missing. It just stopped about 2 months ago, like exactly when my warranty ran out.lol and they want me to pay $200 for them send me a new phone. to hell with that. For the same phone! Has anyone had this problem? PLEASE HELP!

Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4

Ebrecht said:
Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4
Click to expand...
Click to collapse
good information. Helped me out too.

Anybody using SPV C500 on T-Mobile UK

If anybody his using an unlocked Orange SPV C500 on T-Mobile UK could they message me. I can get the phone and SMS, GPRS Internet browsing to work but having problems with SMS. If I use the settings T-Mobile suggests (IP and Port) SMS works but not MMS; if I user another set of settings (IP and Ports) then MMS works but SMS does not get texts spontaneously only on reboot; T-Mobile have run out of ideas as not one of their phones.
Seems need to configure in the MMS section, the GPRS section and ?the Proxy section but getting confused as T-Mobile talk about Proxy and Ports but that can be entered in multiple places.[Current below]
Do I need to interface into WAP and if so how? Do I need to link to MMS networking which T-mobile seem to say I do not need to.
thanks
Paul
--------------
Under Data Connection (Start>Settings>Data Connections )
Internet connection: T-Mobile Inter.
Work Connection: T-Mobile MMS
WAP Connection Automatic
Secure WAP Conn Automatic
2 connections in GPRS connections:
Connections>> GPRS Connections
Description: T-Mobile Inter.
Connects to: The Internet
Access Point: general.t-mobile.uk
User Name: t-mobile
Password: tm
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:
Connections>> GPRS Connections
Description: T-Mobile MMS
Connects to: Work
Access Point: general.t-mobile.uk
User Name: user
Password: wap
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:
Connection >>Proxy ConnectionsNo entries
Connection >>VPN ConnectionsNo entries
MMS Under Messaging - Media Account settings accessed as below
Start>Messaging>MediaMessages>Options>Account Setup>Media Messages
Server: T-Mobile MMS
Send/Receive: Automatic
Outgoing message size All.
Allowed messages: Personal
MMS Connection Under Messaging - Media Account settings accessed as below
Start>Messaging>MediaMessages>Options>Account Setup>Media Messages>Edit Connection>Servers
Description: T-Mobile MMS
MMSC address: http://mmsc.t-mobile.co.uk:8002
Data Connection Work
Gateway: WAP Gate 1.0
IP Address: 149.254.211.010
Port: 9201
Above make MMS work but stop SMS spontaneously receiving messages.
149.254.201.135 Port 8080 work for SMS but stop MMS working.

mms for cingular / at&t help

Can anyone please share their knowledge or experience on how I can get my unlocked 6.1 shadow to make the mms work for at&t. I tried all kind of stuff from this forum and elsewhere and I still cannot get it to work.

MMS settings for AT&T
klunk said:
Can anyone please share their knowledge or experience on how I can get my unlocked 6.1 shadow to make the mms work for at&t. I tried all kind of stuff from this forum and elsewhere and I still cannot get it to work.
Click to expand...
Click to collapse
Do you have these settings set as follows?:
Server name: AT&T MMS
Gateway: wireless.cingular.com
Port number: 80
Server address: http://mmsc.cingular.com/
Connect via: MEdia Net
Then, check your MEdia Net settings:
Connects From: The Internet
Connects To: WAP network
Proxy: wireless.cingular.com:80
Type: HTTP
Username: <leave blank>
Password: <leave blank>
see this AT&T forums thread
Hope this helps.

.nevermind.

mms fix
Please post to links for users to try thanks.
For those who can't receive at&t mms:
I used the PR MMS MediaNet settings tool available on XDA
Go to Settings>Connections>Connections
Delete all data connections before running the tool
Use the device Network Setup Tool to make your primary connection.
Run the PR MediaNet MMS tool to set the size limites
After setting up the connection create a new connection in com manager
Use Work Connection
Use these settings
Connection Cellular GRPS 3G
Name I used MediaNet No Proxy
APN wap.cingular
Username [email protected]
Passwork CINGULAR1
Do not use the proxy settings for this
Have all internet applications go to this connection do that in your com manager
Go into your mms options in messaging click servers click at&t mms make sure MediaNet is still the connection for send/receive mms
now it will send receive mms using the at&t proxy and the internet for other apps without the proxy

NZ 2 degrees mobile internet

I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 118.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................

oh very useful thank you very much
i used 2degree too with HTC Desire

try that
I'm using two degrees in nz and the olly settings are:
in connection type use "cellular line 3G"
for the access point "internet"
QUOTE=Karearea;4795184]I'm trying to configure my blackstone for mobile internet use on the 2 degrees network in New Zealand. The 2 degrees website gives the following config info:
WAP Gateway Settings
WAP gateway IP: 1i18.148.1.118
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
Homepage: http://m.2degreesmobile.co.nz/
APN: 2degrees
MMS Settings
WAP Gateway Port (WAP2): 8080
WAP Gateway Port (WAP1): 9201
WAP gateway IP: 118.148.1.118
Homepage: http://mms.2degreesmobile.net.nz:48090
APN: mms
Internet Settings
Homepage: http://m.2degreesmobile.co.nz/
APN: internet
Going through Start > Settings > Connections > Connections > Add
I entered http://m.2degreesmobile.co.nz/ into the Access Point Name field and proceeded to completion (leaving the Username and Password fields empty).
Unfortunately when trying to connect to the internet I get a 'can not connect for an unknown reason' error.
I can't see anywhere to configure WAP or MMS but I don't believe it's this that is preventing me from access the internet.
If anyone has any suggestions on how to get it working................[/QUOTE]

no doubt you have solved this problem already but for anyone who hasn't, 2degrees website is very helpful and there is a section were you write in your phone number and some other details and they send you a bunch of txt msgs containing updates and settings changes that will fix the 3g problems.