For some reason my Cingular 8125 isn't able to send MMS but I am able to receive. I've been on the phone with cingular for like 4hours and they weren't able to solve it. And of course they can't replace cause the phone is 2 months out of warranty.haha I've gone through all of cingular and the settings are exactly what they are suppose to be.
My MMS settings,
Server Name: Cingular MMS
Gateway: wireless.cingular.com (I've also tried 66.209.11.61)
Port Number: 80 (also tried 1080 and 9201)
Server address: httpp://mmsc.cingular.com
Connect via: MEdia Net
Sending Size: 300K
WAP Version: WAP 2.0
Media net connection setting,
I got CSD Cingular that dials 14152441012
And then I got Cingular GPRS:
Cellular Line (GPRS)
Access Point: wap.cingular
Username: [email protected]
PASSWORD: CINGULAR1
advanced I have "Use server-assigned IP Address"
checked also is "Use IP header Compression"
Proxy settings: wireless.cingular.com and both boxes are checked
It's exactly what Cingular tells me. I've heard that it could be the phone. But I know it's not, it's gotta be a setting that is missing. It just stopped about 2 months ago, like exactly when my warranty ran out.lol and they want me to pay $200 for them send me a new phone. to hell with that. For the same phone! Has anyone had this problem? PLEASE HELP!
Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4
Ebrecht said:
Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4
Click to expand...
Click to collapse
good information. Helped me out too.
Related
hello i have just got a xda 2 it was locked on on all networks except o2.
since then i managed to unlock the phone to all networks but.....
i need the settings for t-mobile so that i can use wap and the internet.
can somone please tell me the gprs and wap settings for this. Also i am on payasyougo. please help i am new to this!!!!!!!!!!!!!.
Im not sure if T-Mobile's Pay as you go is the same as the one in the states, but if so you cant get on the net with an XDA if it is, unless you switch your pay as you go over to a Sidekick 2 pay as you go plan which will take a daily fee from your balance but you get unlimited access that way, the american fee for this is $1.00 not sure what that is in your curency but i expect that it would be diffrent any way.
but here are the settings i use here in the states
set 3 new GPRS connections and for the accesee name put in these
wap.voicestream.com
internet2.voicestream.com
internet3.voicestream.com
probally it will be tmobile.com instead of voicestream T Mobile bought out voicestream here in the states and they never renaimed ther accsess methods.
if that helps great if not sorry
Uk settings
Homepage: http://wap.t-mobile.co.uk/ or http://www.t-zones.co.uk
GPRS APN address: general.t-mobile.uk
Gateway (IP) address :149.254.001.010
Username : user
Password: wap
Session type: Continuous / permanent
Port number: 9201
Authentication: Normal
SMTP email server: smtp.t-email.co.uk
t-mobile settings on mdaII (usa)
After weeks of searching different forums and conflicting info, these are the settings that finally worked for me. Mind you I use the $4.99/month T-Zones plan but can acess regular http pages just fine now...
Connects to: The Internet
Access Point: wap.voicestream.com
User Name:
Password:
Primary/Secondary DNS: Leave Blank (contrary to most forums i've read)
IP Address: Leave Blank
Proxy Settings
This network connects to the internet: Check Box
This network uses a proxy server to connect to the internet: Check Box
Click "Advanced"
HTTP - 216.155.165.50 - Port 8080 (do not keep as just 80)
WAP - 216.155.165.50 - Port: 9201
Secure - 216.155.165.50 - Port: 9201 (yes, 9201...Do Not change to 9203 unless you see issues with certain pages)
And for those who require AIM: download it from the Brazilian site. Its free and the messenger itself is all english. Be warned- using other than the AIM built-in to T-Zones will minus from you message plan as if they were regular text messages. This is Per Message- not session. Also- this is my working setting for AIM...
Host: login.oscar.aol.com (typical settings)
Port: 25 (the default is 5190 but T-Mobile blocks this port)
Hope this works for others....
thanks very much settings work great on my HTC Universal WM6
These are for TMobile USA.
I have these for TMobile Usa. Enjoy and good luck. I did notice that mms will not always work for these. A network configuration may need to be ran. I also added a text file that will teach you how to increase the mms size.
I guess you guys haven't heard about tmo's new apn there rolling out: epc.tmobile.com enter that in your phone's apn address and you wont need a proxy even with the 5.99 plan
Thanks for all your post, I have the same problem and now it has been sorted!
Levelup what did you do?
can anyone find t-mobile uk internet settings for htc touch hd? Because Im thinking to buy one and it might be locked on orange.
how do i download the aim by text message?
prodigalfish said:
After weeks of searching different forums and conflicting info, these are the settings that finally worked for me. Mind you I use the $4.99/month T-Zones plan but can acess regular http pages just fine now...
Connects to: The Internet
Access Point: wap.voicestream.com
User Name:
Password:
Primary/Secondary DNS: Leave Blank (contrary to most forums i've read)
IP Address: Leave Blank
Proxy Settings
This network connects to the internet: Check Box
This network uses a proxy server to connect to the internet: Check Box
Click "Advanced"
HTTP - 216.155.165.50 - Port 8080 (do not keep as just 80)
WAP - 216.155.165.50 - Port: 9201
Secure - 216.155.165.50 - Port: 9201 (yes, 9201...Do Not change to 9203 unless you see issues with certain pages)
And for those who require AIM: download it from the Brazilian site. Its free and the messenger itself is all english. Be warned- using other than the AIM built-in to T-Zones will minus from you message plan as if they were regular text messages. This is Per Message- not session. Also- this is my working setting for AIM...
Host: login.oscar.aol.com (typical settings)
Port: 25 (the default is 5190 but T-Mobile blocks this port)
Hope this works for others....
Click to expand...
Click to collapse
Hi,
I have everything working on my unlocked Cingular 8125 except for MMS. I received an mms message this morning but could not download it. I am currently on the Blue side ( ATT wireless) of cingular. Has anyone gotten this to work?
Thanks in advance!
if all the settings are correct then it should be fine. make sure u are trying to connect to the correct connection. go into MMS and click
menu - mms configuration - servers - click on the settings in there - make sure "Connect Via" drop down box is selecting the right connection. ie trying to use gprs from ur service provider. Hope this makes sense!
ben
I spent several hours yesterday getting this to work..follow the instructions at this URL https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB44046.html for the Siemens SX 66. However use the following information
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Hope this helps
Hi Thanks for the tutorial. I configured everything as said and it works fine!!
Thanks once again.
I tried the settings listed for the 8125, but they didn't work ...
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Do I need to change anything else?
Thanks for your help.
Okay, I got it.
Here's what I changed:
Gateway: 10.250.250.100
Port: 9201
Server: http://mmsc.mymmode.com
Connect via: (enter your internet connection here)
WAP Version: 1.2
Thanks for your time!
I tried to follow the steps here but I don't have the MMS connection because I did not run the extended cab. anyone know what I need to do?
Hey everyone!
Tearing out my hair with this one! No probs with GPRS or browsing the Web, using push email functions etc.
BUT MMS just wont work! Am on O2 and using the following settings found under the MMS Configuration menu:
Server: O2UK
Gateway: 193.113.200.195
Port: 8080
Server Address: http://mmsc.mms.o2.co.uk:8002
Connect Via: My Work Network (the default i use for browsing the web, etc)
Sending Size: 100k
Wap Version: 2.0
Have checked with O2 that MMS is enabled on the sim and it is (have checked with them twice now).
When i go to send a MMS messsage, it says sending but then comes back and says one of 2 things, either:
User Barred
Or
Cannot send message will remain in Outbox
GPRS seems to activate when i hit the send button. I have even tried connecting to the web first. any ideas? going mad!
It won't recieve whatsoever it will just have a text message saying "youve been sent a text message log on to o2.co.uk to view".
My wizard is a O2 XDA Mini - S, Rom is an Imate K-Jam ver 2.16.9.1 WWE dated 2/6/06
Hope you can help!
The normal O2 settings have two connections, one for general browsing(My ISP) and one for wap(My Work Network). MMS uses the 2nd.
sorry Kevino, not sure what you mean?
Under settings->Connections->Connections. O2 adds a connection under each of "My ISP" and "My Work Network".
Sorry I do not have the wap connection detail as I deleted it. Try a search for "O2 GPRS settings" and when you find a list you will see what I mean.
These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?
These are the only settings i can find, do you mean that MMS should be sent by dialup connection kevino?
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
These are the onle settings i can find, do you mean that MMS should be sent by dialup connection kevino?
I think i may have found the problem guys! I'll keep you updated.....
I kept getting a message saying "Error - User Barred" everytime i was sending MMS. Found a site where a few guys had the same problem and found out the solution.
Basically have to call O2 and ask them to confirm with their Data Services team that MMS is enabled on all their systems as opposed to just the primary system. Replication seems to be an issue they suffer from.
Original article: http://www.esato.com/archive/t.php/t-50035
Will keep you posted they have had to replicate it manually and it may take up to Friday!
Wish me luck
Well I hope that's your problem. But look at
http://forum.xda-developers.com/viewtopic.php?t=50477&highlight=o2+gprs+settings
to see what I was trying to explain. Ah just noticed it appears different for payg (you do not say what you have)
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=
I searched the forums, but couldn't find this precise question asked, so here goes nothing...
Alright, I'm currently using an HTC Wizard 200 with the 2.26 rom, which a friend fixed up for me since he upgraded to a Samsung.
AT&T is my service provider, and as such, the phone had no issue with texting, or making/receiving calls. Only hang up I had was that it was using the T-Mobile servers for MMS messaging, so nothing would send/download, that way.
After an hour or so of working on it last night, I made it work. My current settings under "Connections" are...
Programs that automatically connect to the Internet should use:
MEdia Net-
Name: Cingular GPRS
Cellular Line (GPRS)
Access Point: wap.cingular
User Name: wap.cingulargprs.com
Password: CINGULAR1
Domain: *left blank*
Under "Advanced" tab:
Use IP Header compression: Checked
Under "Messaging->Options->MMS->Servers",
MMS Configuration
Cingular MMS
Server Name: Cingular MMS
Gateway: wireless.cingular.com
Port Number: 80
Server Address: http://mmsc.cingular.com
Connect via: MEdia Net
Sending Size Limit: 300k
WAP Version: 2.0
Now, this works flawlessly for receiving/sending MMS. My phone is fully operational, and I'm digging it. But the one thing that's bothering me is that I can connect to Internet Explorer with these settings. And I don't want to be able to, even on accident. I unchecked "This network connects to the Internet" under Proxy Settings, and it failed to connect to the GPRS once, but if I accidentally select Internet Explorer, it can still connect if the WLAN is off. If WLAN is on, it will default to using the internet connection.
Is there any way that I can keep my MMS capability, but disable these settings from allowing me to accidentally access internet browsing?
Like I said, I gave it a search, and couldn't find anything related to what I'm trying to manage. So any help? This is my first time working with any sort of phone, so I'm surprised I even got this far without help.
Much appreciated, ahead of time.
This should be
MEdia Net-
Name: MEdia Net
Cellular Line (GPRS)
Access Point: wap.cingular
User Name: [email protected]
Password: CINGULAR1
Domain: *left blank*
You also have to set up your proxy settings
http://www.wireless.att.com/support/deviceConfig.do?content=KB71396.html
Then;
ISP
Name: ISP
Cellular Line (GPRS)
Access Point: wap.cingular
User Name: [email protected]
Password: CINGULAR1
Domain: *left blank*
Check out this post.
http://www.wireless.att.com/support/deviceConfig.do?content=KB71396.html
I followed both those guides, and I actually had everything setup the exact same, aside from the "MEdia Net" name being "Cingular GPRS". It actually works fine both ways.
Sadly, I still don't understand how to block it from web-browsing. It's not doing it automatically, or anything. I'd just like to disable the capability, without disabling MMS, for safety purposes.
Then just set it to My Work Network as it is blank and when you use MMS, it will pick up MEdia net automatically.
I'm under the impression that deleting MediaNet completely is the way to go.
http://www.pocketpcaddict.com/forum...-8125-can-i-delete-gprs-files-altogether.html
Why bother asking for help
so ive looked high n low n found a whole bunch off MMS wont work on 8125 thats on TMOBILE !!! i read this !!! Server Name: T-Mobile MMSC
Gateway: 216.155.165.50
Port number: 8080
Server address: http://216.155.174.84/servlets/mms
Cnnect via: My Work Network
Sending size limitation: 300k
WAP version: WAP 2.0
***Make sure the port# is 8080, and that this is set to default
For "My Work Network":
APN: wap.voicestream.com
Proxy Settings:
- This network connect to the Internet (checked)
- This network useses a proxy.... (checked)
- Proxy Server: 216.155.165.50
!!!!!! N thought it would work however i did that step by step n still cant send or get them i go in2 them n hit download n it brings me back to the MMS screen BUT NOTHING HAPPENS SOME1 HELP ME !!! THANKS !!!
FIXED !!!
all the info was coeect xcpet for Gateway: 216.155.165.50 it had to be Gateway: 216.155.165.050 n that was the problem now its workin thought id post it on here in case ne 1 else looked it ^ !!!