Hi,
I have everything working on my unlocked Cingular 8125 except for MMS. I received an mms message this morning but could not download it. I am currently on the Blue side ( ATT wireless) of cingular. Has anyone gotten this to work?
Thanks in advance!
if all the settings are correct then it should be fine. make sure u are trying to connect to the correct connection. go into MMS and click
menu - mms configuration - servers - click on the settings in there - make sure "Connect Via" drop down box is selecting the right connection. ie trying to use gprs from ur service provider. Hope this makes sense!
ben
I spent several hours yesterday getting this to work..follow the instructions at this URL https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB44046.html for the Siemens SX 66. However use the following information
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Hope this helps
Hi Thanks for the tutorial. I configured everything as said and it works fine!!
Thanks once again.
I tried the settings listed for the 8125, but they didn't work ...
Gateway: 10.250.250.100
Port: 9201
Max. Sending Size: 300K
Do I need to change anything else?
Thanks for your help.
Okay, I got it.
Here's what I changed:
Gateway: 10.250.250.100
Port: 9201
Server: http://mmsc.mymmode.com
Connect via: (enter your internet connection here)
WAP Version: 1.2
Thanks for your time!
I tried to follow the steps here but I don't have the MMS connection because I did not run the extended cab. anyone know what I need to do?
Related
Hi, please can somebody post the vodafone mms settings for the magician.
I've unlocked the mda which was a t-mobile to begin with. I've searched for the settings on the post but havent been successful with them.
Thanks.
Vodafone MMS Settings
Hi
here are the setting for the Vodafone MMS
Go to settings>Connections>Connections>My Work Network.
If you have an exsiste connection edit it if you do not make one.
Put this settings in they:
APN: wap.vodafone.co.uk
User Name: [email protected]
Password: user
When you done this you have to go to messaging and go to:
Menu>MMS Configuration>Servers
If you find a server in they edit it if not creat one.
In they put this settings:
Gateway: 212.183.137.012
Port Number: 9201
Server Address: http://mms.vodafone.co.uk/servlets/mms
Connect Via: My work Network
After that close the servers an tap on set As Default.
If by any chance it does not work change the gateway to this:
212.183.137.12
Hope this well help you.
Ciao
Gigino
this has worked, thanks
For some reason my Cingular 8125 isn't able to send MMS but I am able to receive. I've been on the phone with cingular for like 4hours and they weren't able to solve it. And of course they can't replace cause the phone is 2 months out of warranty.haha I've gone through all of cingular and the settings are exactly what they are suppose to be.
My MMS settings,
Server Name: Cingular MMS
Gateway: wireless.cingular.com (I've also tried 66.209.11.61)
Port Number: 80 (also tried 1080 and 9201)
Server address: httpp://mmsc.cingular.com
Connect via: MEdia Net
Sending Size: 300K
WAP Version: WAP 2.0
Media net connection setting,
I got CSD Cingular that dials 14152441012
And then I got Cingular GPRS:
Cellular Line (GPRS)
Access Point: wap.cingular
Username: [email protected]
PASSWORD: CINGULAR1
advanced I have "Use server-assigned IP Address"
checked also is "Use IP header Compression"
Proxy settings: wireless.cingular.com and both boxes are checked
It's exactly what Cingular tells me. I've heard that it could be the phone. But I know it's not, it's gotta be a setting that is missing. It just stopped about 2 months ago, like exactly when my warranty ran out.lol and they want me to pay $200 for them send me a new phone. to hell with that. For the same phone! Has anyone had this problem? PLEASE HELP!
Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4
Ebrecht said:
Ok I finally got it to work.
MMS
66.209.11.61
9201
http://mmsc.cingular.com
MEdia Net
200k
WAP 1.2
Registry Edit:
HKLM/Software/ARcsoft/arcsoft mms ua/config/ui/sizelimit
add SendLimit4 DWORD, Decimal 614400
change SendCount to 4
Click to expand...
Click to collapse
good information. Helped me out too.
Morning all. Thanks to everyone for getting the dopod version of WM6 on to the site so quickly (and working with Hardspl). I am having difficulty getting my MMS to work on 3 UK. Does anyone have the settings.
Thanks in advance.
Matt
Dont worry, I have sorted it.
Settings are:
Internet
name: Three
access point: three.co.uk
everything else blank.
MMs
sever: 3 mms
port: 8799
server address: http://mms.um.three.co.uk:10021/mmsc
connect via: internet
Matt
Hi guys! Would anyone happen to have the settings for MMS for t-mobile uk? A cab would be even better. Cheers.
Bump
Anyone help?
Your MMS settings should be:
Gateway:149.254.201.135
Port: 8080
Server Address: http://mmsc.t-mobile.co.uk:8002/
Connect Via: (your connection, usualy T-Mobile Internet)
Send Limit: 300k
WAP Version: WAP 2.0
Hope this helps........
worked!!
This sorted me out, massive thanks!!!!
Hi, just unlocked my HD and seems to be working with my O2 SIM, but all the settings for going online and sending MMS are not working, I get the message that it couldn't dial or get through with O2. The phone did an automatic set up for the O2 network, but it didn't set those to work properly.
I remember I had to enter manually all the server addresses and ports from O2 with another set I had a year ago.
Does anyone has a guide and settings that I have to enter to make it work?
Hey, I'm on O2 and my connection setup works fine, have you tried updating the connection setup database first?
The settings are as follows if you want to add them manually.....
3G (mobile web)
access point: mobile.o2.co.uk
user name: O2web
password: password
use server assigned IP/DNS
MMS (o2 active MMS)
server name: o2 active MMS
gateway: 193.113.200.195
port: 8080
server address: http://mmsc.mms.o2.co.uk:8002
connect via: o2 active/mobileweb (your choice)
send limit: 300k
wap version: wap 2.0
Hope these help, let me know if anything isnt clear!
Thanks, I had to do it manually that way yesterday, found it online. When I tried making the devices to update database automatically it wouldn't get the settings properly. I tried those settings you posted and also similar ones using a different port. 9201.
But it shows I am on Edge and G2 when I go online, and when it is on standby phone mode it shows full 3G.