Related
Just as in the subject! I tried everything: soft, hard reset, removing batery, removing simcard, waiting for upto 20 mins staring at t-mobile screen. Nothing seems to work. I can see t-mobile white starting screen withIPL,SPL,GSM,OS versions and that is it. If I am lucky - waiting cursor appears.
This is the second time it happened, previousely I managed to turn it on after 30 mins of struggle. Not this time though.
I am affraid that if I - hopefully - turn it on this time and the battery runs out of power I will be left without a handset!
Absolutely no damage, no dropping, virtually new. Any ideas?
You said you tried hardreset? So, you actually sees the screen that said, "to restore to factory setting press Send", then it said formatting ROM etc.., right? If after hardreset you still have the problem, I would suggest that you send your handset back to them to have it fix. Where are you now? (better if you would have your country and network operator logo set for this forum, so that people can advise you based on your location/operator)
I had my MDA Compact 2, which works for 2 weeks before the speaker died off. Then, after I sent to them to fix, they've got the speaker done, but the entire unit now works .. weirdly. Thats is whenever I had the speaker on, the entire unit will heat up so much that, the battery meter will go down-stream even I have the AC power attached (good for a hand warmer though). Anyway, I sent the thing back to them, and they sent it back to me, with the note "change of the circuit board" (something like that), which I think it is a serious problem that I don't think anyone can fix. Good thing is that my unit is still under warranty, costed me a GBP10 for the postage, but I'm happy that I have it working in full order now.
I wonder if your problems are similar to mine.
hanmin said:
You said you tried hardreset? So, you actually sees the screen that said, "to restore to factory setting press Send", then it said formatting ROM etc.., right?
Click to expand...
Click to collapse
This means that I did not try hard reset then. Holding the power button+stylus reset does nothing more than soft reset. It just goes dark and reboots.
I am in UK on T-Mobile. I think I will go to the shop I bought it in and demand replacement. Pity I loose all data... But I would do hardresetting anyway...
sabestian said:
hanmin said:
You said you tried hardreset? So, you actually sees the screen that said, "to restore to factory setting press Send", then it said formatting ROM etc.., right?
Click to expand...
Click to collapse
This means that I did not try hard reset then. Holding the power button+stylus reset does nothing more than soft reset. It just goes dark and reboots.
I am in UK on T-Mobile. I think I will go to the shop I bought it in and demand replacement. Pity I loose all data... But I would do hardresetting anyway...
Click to expand...
Click to collapse
thats not how you hard reset, hold down camera and record, tap the stylus button at the bottom and keep holding the other 2 until the prompt comes up
dave106 said:
thats not how you hard reset, hold down camera and record, tap the stylus button at the bottom and keep holding the other 2 until the prompt comes up
Click to expand...
Click to collapse
According to the manual: hold power and tap reset with a stylus! Page 79, "To perform a hard reset". Do they know what they sell?
Anyway, thanks! It worked, it did start now. I will check everything now.
sabestian said:
According to the manual: hold power and tap reset with a stylus! Page 79, "To perform a hard reset". Do they know what they sell?
Click to expand...
Click to collapse
Apparently not, that part is for the original MDA Compact on WM2003SE.
M
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Hold down (and keep holding) the camera button while depressing the reset button. Hopefully it boots into a tri-color screen. If so, plug it into the USB port and, at the bottom of the screen, it should display "USB". If that happens, flash it with a *known good rom*, such as a stock T-Mobile rom. Don't try to be clever, the object is to get the phone working. Once the flash has started, *get up and walk away* for 15 or 20 minutes. Don't check in on it, leave it alone, It takes some time. When you hear it's little chime, it's done, rebooted and ready. If any of the above doesn't happen or the flash outright fails, then you may have trashed it permanently. It doesn't sound like it's beyond hope yet, however.
i have the wizard and im having the same problem after installing a ROM from this website...it just goes to the windows mobile screen with the numbers then shuts off...id really like to save my phone is there anything else i can try because that hard reset thing isnt working
axxeman001 said:
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Click to expand...
Click to collapse
Well same thing happened to me a few days back.. I had to Cold Reset [which restored it to factory defaults], but hey I got it working again..
Press Communication Button [Top Left] and Record Button [Top Right] at the same time and use the stylus to soft reset..
You will get a black screen, asking you to press "Send" to reset to "Factory defaults"
Press "Send".
Hopefully you should get your MDA working again ...
I read the "Above" in the HTC Wizard Service Manual [PDF] on the *last page* under the "Cold-reset" Section..
I just got my advantage a couple of days ago. i haven't had much time to use it yet, because of work. i haven't installed any sofware. Sometimes my device simpy won't wake-up. After soft feset, the only thing i did was connect a bluetooth headset, which worked fine. I turned off the screen, and when i came back to my device, about two hours later, it would not wake-up. I had to soft reset. This has happened a few times. Also, its very slow with entering text (When i finished typing the word 'text', 'soft reset' was just being entered on the screen.) It would be worse, but i stop to let it catch up, and check for typos.
It is really annoying to buy a new device and have to put up with this crap. Any help is appreciated.
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
I'm not having the issues with it not waking up, but recently I've had the issues with randomly occuring extreme slowdown, similar slow text entry, quick battery run down and insanely slow screen redrawing and general responsiveness to hardware of screen based input. I've tried soft resets, hard resets, trying to isolate software that might be causing it. So far it seems that the Illiumsoft Newsbreak feed reader I had been using for months without issue might be related to the problem, but I'm wondering if the problem isn't software specific but actually just related to data downloading activity. Thus far, I'm a couple days in without Newsbreak and no occurances of the problem...
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
i am going to hard reset, but with no software installed i dont know that this will help. i am considering switching to the (whats it called, black touch) rom. i dont know f this will help my current issue, but it sure looks nice. on all of my previous devices, i've always used the factory rom, and i'm somewhat clueless and intimidated by the whole process. I just dont want to screw up my new device. if anyone can help with any of these issues, please do.
TrekkerJmm said:
Have you tried tapping the button on the lower right side of the phone (power button) sometimes mine does the same thing, good luck...TJ
Click to expand...
Click to collapse
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
miterb said:
If it were me, I would try a 'Hard Reset' and if that did not clear up the problem, call HTC for a warranty replacement. Hard Reset is hold the volume slider down while clicking the reset button on back of the device.
Brad Miter
Click to expand...
Click to collapse
Concerning the warranty replacement, i bought this from a guy on ebay. It was still in the sealed box with compusa sticker on it, but i'm not sure if the warranty is transferable. Maybe if i could get him to send his receipt I would covered at least from his date of purchase. Anyone know specifics about the manufacturers warranty?
weaselcossey said:
i've always used the factory rom,
Click to expand...
Click to collapse
Well that's your first mistake...
Confucious said:
Well that's your first mistake...
Click to expand...
Click to collapse
Perhaps you could help me fix that problem by telling me how to install the black touch rom without screwing it up.
I'm obviously no developer, nor expert in any type of computer skills. I come to this forum because I love the device, my issues are usually resolved after some discussion here, the people are mostly friendly, and i'm interested in making my device better. I just need some help to do so.
weaselcossey said:
That's the problem, when i press the power button, nothing happens. I have to soft reset to get the device to come back on.
Click to expand...
Click to collapse
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
bigtsr said:
If you press the power quickly and lightly it should come back to
standard Today screen versus pressing and holding which brings up
the power off "pop up",at least that how my 7501 responds.
You may want to try that hard reset then play with Start/Settings
/System/Power.
Click to expand...
Click to collapse
i understand that the buttons respond differently depending on how you press them (press and release, press and hold, etc.) The problem is sometimes, usually when i'm working and away from my phone for awhile, the device simply won't wake-up (power button or any other button pressed in anyway does nothing.) after a soft reset eveything seems fine. this has probably happened 4-5 times in 3 days. After hard reset its only happened once.
Sometimes my device doesn't seem to respond when i plug in the charger, nothing lights up. I've also noticed everytime i check .the battery meter, its alway a denomination of 10 (10%, 20%, 30%). I was sure this was going to be a great device, but i'm beginning to have my doubts.
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
eaglesteve said:
weaselcossey
I had experienced this before but it is so rare that it's hardly worth mentioning. Are you using WM5 or WM6?
It is normal that the battery strength shows in increment of 10%.
If hard reset does not solve the problem, I would try to re-flash the ROM and see if the problem goes away.
Click to expand...
Click to collapse
i'm using wm6, i'm currently using the factory rom on my advantage x7501, but planning to upgrade this evening.
Hello,
I have a problem with my HTC HD. From time to time it shuts down without any reason. When I press the power button I can see the Windows Mobile starting...
Did any body else had this problem?
Is there a solution for this?
Thank you
perhaps your battery is not positioned properly or sitting a bit loose? Try a post-it (or something else thin) on the back of the battery cover..
Mine shuts down and won't turn back on without a reset every time I'm in an area with no signal, it basically stays off while I'm at work.
if you keep getting these kinds of nondescript errors and it survives a hardboot, basically there are three options left:
1) try to flash a different firmware or
2) take it back to the store (flash back first)
3) hope like hlll some guru here gets an eyefull of your problem and knows a quickfix (slim chance seeing the number of daily new posts here and the typical guru tendency towards development as opposed to a supportdesk)
I'd set my hopes on 1) or 2). Good luck however you choose.
Cheers,
Rick
Guys,
I'm having quite the same problem: the touch HD keeps turning on and off automatically, as if the power button is pressed (but its not).
Moreover, the power button just don't work. I press it and nothing happened.
I have master reseted the phone and also have changed its ROM, but the problem stills.
Unfortunatelly I'm start thinking that its a hardware problem.
I guess that a solution shoul be reassing the power button, disabling it. Is there any app through which I can reassing the power button?
Have you solved the problem? I have a similar prob, my power button doesn't seem to work when i press it, and if i soft reset (through HD Tweak) when it boots I get a warning message saying " Warning your device will power off and you'll lose your data, Yes No".
It's like the button is half pressed all the time.
Couldn't find any info on hard key remapping either.
I used to have a similar problem but it was with the screen....
The screen used to turn off suddenly without a reason but the phone is turned on and I keep receiving calls. After returing back to my Supplier in Egypt they replaced it with a new one after testing it for three days.
I'm using the new one sine 20th of December 2008 and nothing happened again
Well if you guys are in the US (or have HSDPA/UMTS disabled) then re-enable them (that should hopefully get rid of the restarts in low-to-no-signal areas).
Hope it helps
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop