I have attached a picture of what MAY be the hw69xx and maybe the hw65xx JTAG connector. If anyone know anything about this board, or even the manufacture who makes the board please post here. The Sable community is shortly dieing. This will be my last attempt to fix the "NO GSM" Issue on this device. There have been numerous people that have contributed to reviving the Sable Device including SPGI, Mdelleman, Bramblyrose, Jambongo, Cesgray.
Related
Hello
First I am many sorry if repeat but I still not know what I can do. I buy mobile and I thing is Type 2b (still on operator logo) but I don´t know how I can find solution, because I tryed flash with many roms and I tryed latest radio rom and everything done but when is finish it restart and than is still in orange logo (or HTC and etc). and about two seconds show NO GSM.
I have SPV m3100 with SPL-1.40.Olipro.
PLEASE help me I cant find solution !!!
Many thanks and many sorry if repeat threat
Try a hard reset. You DON'T have Hard SPL on your phone. It may be unlocked but it may not be Supercid. The best idea would be to flash the original carrier rom on to it and see if that fixes it THEN flash Hard SPL on it.....
Good Luck...
Its possible you may not be able to recover your radio rom...
Hello,
Thank you, but I tryed originall shipped rom and original rom from orange site. Everythings done fine. I tryed also radio rom and it done OK. I dont know what I can do.
Please can you send me links for there roms which I can flash?
I wish I can repair.
Thank you in advance.
If the shipped rom fails you are probably looking at a permanent brick. There are some other things you can try using MTTY but it may not be hopeful. This is one of the pitfalls of buying a "bricked" phone. It may not be fixable and you spent $$$ that could've been spent more usefully elsewhere...
Hello,
thank you for reply, and how I can use there MTTY and when I start it it is like other working pda and it flash led lights, only for second, like when you flash new rom and when start and then it flash light and then screen change for "tap on screen" but here only flash and dont change screen.
Do you know what I mean?
Does it say "tap on screen to setup"?
If so you may be looking at a bung digitizer. You will need to replace the LCD to fix this.
Hello,
no, it is only like it, it stay orange logo, but when "blik" "NO GSM" it blik all display and than stay in orange logo too
Do you thing if JTAG help me?
can't say, never used. You do need some technical skill to use the Jtag method...
yes I have some technical skills but I dont have any schematic of jtag cable.
EDIT: I find some pdf with two schematics:
1. Holly Gates' Schematics for the JTAG Dongle
2. Modified Schematic for the JTAG Dongle Circuit Using 74LS541
Which can I use?
I am seriously needing some light shed over here please some one i have been hunting and hunting, I even wrote a post to try to get help please help me so if any one else needs any help like this I may be able to help them also.
My phone was going through a flash when it restarted it got "Bricked" at the Windows Mobile splash screen. I want to know is there any way I can unbrick my Cingular HTC 8525 Herm100 device, via SD(micro). I have reformated my card but it still wont go to the bootloader, I have witnessed the small text at the bottom left of the screen that reads "No GSM" imediately after the phone comes on. Now either I am over reading something or missed something but if I could trouble some of the devs, admins, users, or even (not recommended, but im desperate to get working) flamers...
Please help me so that I may help others later on. Thank you
Im not a know it all....but I'll try and help.
Questions...
1) Have you tried to do a Manual load of the Boot-loader (POWER+OK+RESET)..?
Usually I HOLD the POWER+OK then hit the RESET while still holding the other two buttons, until the boot-loader loads.
2) Try taking out your Sim's card, see if the NO GSM is still there...?
I've had this problem on other phones in the past.
3) Unbricking using the SD card..? try doing a SEARCH THIS FORUM option for a
more dedicated search...
I would use a USB cord for the unbricking, as I have had better chances of undoing a brick.
Also you can used a "Motorola Razr", USB cord also with this phone for the USB options.
Well hope something works for you.
Thanks and good Luck.
Jake Howe
You also need to have installed Hard SPL V7... If you haven't then I hope you have a copy of your SHIPPED STOCK ROM as this may be th eonly thing that will fix your Hermes. If it has the "No GSM" error then its possible you will still have a brick. It generally means the radio rom is corrupted and is impossible to fix...
Thank you guys for the response I have reversed the brick of the phone a few days ago. My other question is, do anyone know how/or if it is possible to flash the phone and lock it to an "IDEN" type phone or know the Network ID Code for a Carrier called, boost mobile; a subsidiary of Sprint/Nextel.
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
when yoy say "fail" what exactly happen....???
The phone wont turn on again T_T
You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..
The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)
Moved as this is not ROM Development
Sorry about that, anyone know how i can fix it????
Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?
Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.
Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.
Hi. Hd2 T-mobile Have stitched as usual HD2 Leo. Now it is defined by the computer as "qualcomm diagnostics interface 3197". Whether there is a decision that it to cure or only JTAG?
I have the same problem.
Question - is it possible to restore this device?
i'm assuming you flashed a ..51.. version radio? if so, currently no known fix.
I do not know what happened to him.
The previous owner said that updated the firmware, but what specifically - could not find.
Is it possible to somehow check?
Phone does not go into bootloader mode.
well if it wont turn on at all, then no theres no way to see.
however, the most common "brick" on tmous (t mobile us) phones is flashing a non tmous radio. the symptoms are.... won't power on, no charge light when plugged in to charger, and shows up on the pc as qualcomm.
there is currently no known fix.
you could get it fixed under warranty, but you will probably need to go through htc, t mo probably won't help if you don't have a proof of purchase.however you proceed, don't mention flashing, cos they will charge you a few hundred dollars for a new circuit board.
Flashing through JTAG interface will be able to solve the problem?
If yes, are there circuits and software?
Or only specialized devices and software?
HI. have you solved the problem??? my Tmous is brick. Can you help me???
qualcomm = brick
HTC ELF doesn't turn on.
I was flashing my Elf with Micro-SD method and when it get to flashing BINFS the phone just turned off . No Orange Led, no boot-loader mode, no hard reset can be done with it...
What could be the problem??? Can anyone give an advice
Best Regards VeNtilY.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0
Problem? Sounds like you didn't have full battery when flashing, and now your phone is bricked.
If you have some interest in doing so, you can always try JTAGing (check my sig) and that should help. Fairly complex i guess though. The thread is a bit messy, but I wanted to keep it so people could track through the thought process of what I was doing, and then when help came from another member (bombom81) how we got it to work on his phone.
gogagogi.
Read all the stickies, it is covered in there. Don't hijack threads, and post in relevant sections please.