Database Users

I need yours help!!

I have M$ vista ultimate.When i try to flash my trinity but i have problem with usb driver under vista.SSPL bootloader cannot make a conexion with my mobile phone?When i use activesync it's OK but when i run sspl i have this message :error conexion.
I think that the problem is beacose i use vista.Eny ideas?

yup - find an XP machine.

I had the same problem had to use Daughters pc with XP on

lapix said:
I have M$ vista ultimate.When i try to flash my trinity but i have problem with usb driver under vista.SSPL bootloader cannot make a conexion with my mobile phone?When i use activesync it's OK but when i run sspl i have this message :error conexion.
I think that the problem is beacose i use vista.Eny ideas?
Click to expand...
Click to collapse
i have flashed twice under vista, use these drivers for your trinity & disable usb connections in mobile device center

Thanks!!!
Now i start boot loader but evry time i have this message : your image file is corrupt.
I know that the files isn't corrupt, and i think that the problems is still in the driver!
Can you help me?

Thanks Goodie. Drivers worked a treat.

SD Card method!
Maybe you should try flashing with the SD Card method! It's always safer and easier!

USPL - 100% Working in vista

I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release

grabson79 said:
I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
Click to expand...
Click to collapse
Thanks for news about it..!
Worked for me.

Works Great !

One more notch on WM6 belt!!
Working great!!!
Used it to upgrade to WM6 (bepe's) and later, GSM (2.93.90)!!
Big

Thank you, this helped me USPL my orbit on vista.

Oh...My...God! That is so cool of you! Many thanks!!!

at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).
at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?

Sharkey1802 said:
at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).
at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?
Click to expand...
Click to collapse
First put your Artemis into bootloader then connect to your PC. Vista will install a driver for a PDA but this driver is not correct. You can find the correct drivers in the posts above this. After installing the NEW drivers you can reset your artemis and disconnect it from your pc. Restart it and just run USPL again. Has to work now.
Good luck!

ok what am i doing wrong...?
have followed all the steps above... but still get a 270?
am on official O2 uk WM6 rom but want to upgrade radio as performance / batt life have become dire since moving from the HTC WM6 rom to the offical O2 one....
device now syncs without drop out having changed driver to the old 2004 one... but still cant upgrade radio or USPL or anything ......
HELP!

the odd thing is the O2 wm6 rom updates fine within vista. but nothing will go over the top of it?

o21 exchanged my orbit... new one updates fine.. woohooo

first thanks for the news now we know the uspl works on vista
second 2. Do a hard reset or clean storage (some programs like battery status block full access to your device) is interesting to know this
grabson79 said:
I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
Click to expand...
Click to collapse

Second time flashing, help!
I succesfully flashed my Artemis (after using USPL)... At the moment, I'm tired of my cooked ROM and I would like to install a new ROM. Do I have to use USPL a second time?
Bootloader screen says: SPL 1.11.100 (or something like that...)
Many thanx...

Doesn't work, because Vista says that it is not a Vista driver. How did you all installed the drivers under vista???

cmon uspl gives error code 260
Though I am not new to these ROM upgrading things, I am always receiving error code 260 while trying to update the SPL by cmon uspl. I have already successfully updated by uspl, long ago. I have flashed several ROMs and tried most of them.
Why only cmon uspl is giving me such error?

Upgrade ROM without ActiveSync!

hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?

see this post 6
this method work!
http://forum.xda-developers.com/showthread.php?t=340618

I've done all said in the forum you have indicate but nothing....
I fear that my device is not out!

WaveMaster1406 said:
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
Click to expand...
Click to collapse
Have you placed the phone into bootloader mode before using the RUU? (Holding the camera down and pressiing the soft reset button?)

Activesyn won't recognize the phone if connected during bootloader ... but if the phone says "USB" on the bottom left, you can run the RUU and it will work.

My device display "USB" in bootloader mode when i connect it to my PC.
But the problem is that the pc can't detect a new device connected...
When i try to flash by the SD card my herald can't detect the card!
I'm affraid! Please HELP ME!!!

why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao

why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
IPL 1.08.0001
SPL 1.08.0001
It's normal that i get same informations about IPL and SPL?
I've done the procedure to enter in bootloader mode
But my computer don't detect it and my device display "USB" in the white area
of bootloader screen (this is normal)
But i don't know why it can't read my card with HERAIMG.NBH file inside!!!
The version of my bootloader is not displayed. Is it normal?
Per aps my bootloader get to be flashed, but how can i do it if it's the source of my problem?
PLEASE YOU ARE MY LAST SOLUTION!

about ipl 1.08xxxx and spl 1.08 xxxxx (very bad problem)
http://forum.xda-developers.com/showthread.php?t=343760&page=2
1 you have original Ruu.,.,......ship.exe
try it again when you are in bootloader mode, and reply. goes or not?
2 you have your original ruu..........ship.exe
whit winrar extrat all, and you have to rename the ruusigned file (60MB or more MB not the file with 1 MB!, to HERAIMG.nbh.
if dont work i some not can help you i m sorry.
my device work after many problem again but i have no WLAN and i have not isp 1.08xxxxxxxxxx
i wish you can write very good new!

show in your computer
if you are in bootloader mode wiht herald
if you have a networkcard not active! reactive this now
i had wm5 and his sync automatic
but after data crash on herald with wm6 does not sync again,
i search in my computer and a have see that 1 windows mobile device card does not was connect and i have reconnect this. and momentanly works again good with wm5, wm6, touch flo
show, you have no other way
ciao

Windows XP ActiveSync Connection Problem! :(

Yesterday i tried to upgrade rom of my Qtek S200 device. I uploader temp rom after that when it comes to installation of wm6 rom my device could not connect to my pc via ActiveSync. I have Windows XP. When i plug the device to my pc it shows an error message : ""There was a problem installing this hardware Windows Mobile-based Device" What can i do please help me...

Put the device in bootloader, and flash a new WM5 NVID ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

but i cannont connect my device with activesync when i try that it tries to find a driver. finds a driver and installs that but after that "There was a problem installing this hardware Windows Mobile-based Device" message appears and i can not connect my device to pc.
can i upgrade roms with Windows Vista?

Uninstall active sync. Restart. Re install activesync. Restart. Then put your device into bootloader. Disable connect through USB in active sync and then connect the device and PC and then try to flash a WM5 ROM.
Vista won't work with upgrading because of the drivers.

I had just write a post in my thread about this. I have the same problem intalling the device in PC.
Before I had put the actual ROM in my phone, I went to bootloader and inserted another ROM in this case an official one... right now I cannot go to bootloader . Do I have to do a HardSPL!? probably this is the solution for quaschi!
We wait for the opinion of more experienced members!

Should like to Flash ROM, but ERROR 260

Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)

run artemis uspl first
remove any sd card if u have
and then try it

Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.

Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP

You need RUU for vista

Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(

I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097

Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879

Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much