Yesterday i tried to upgrade rom of my Qtek S200 device. I uploader temp rom after that when it comes to installation of wm6 rom my device could not connect to my pc via ActiveSync. I have Windows XP. When i plug the device to my pc it shows an error message : ""There was a problem installing this hardware Windows Mobile-based Device" What can i do please help me...
Put the device in bootloader, and flash a new WM5 NVID ROM.
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
but i cannont connect my device with activesync when i try that it tries to find a driver. finds a driver and installs that but after that "There was a problem installing this hardware Windows Mobile-based Device" message appears and i can not connect my device to pc.
can i upgrade roms with Windows Vista?
Uninstall active sync. Restart. Re install activesync. Restart. Then put your device into bootloader. Disable connect through USB in active sync and then connect the device and PC and then try to flash a WM5 ROM.
Vista won't work with upgrading because of the drivers.
I had just write a post in my thread about this. I have the same problem intalling the device in PC.
Before I had put the actual ROM in my phone, I went to bootloader and inserted another ROM in this case an official one... right now I cannot go to bootloader . Do I have to do a HardSPL!? probably this is the solution for quaschi!
We wait for the opinion of more experienced members!
Related
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's
Hi!
When i try to connect my wizard with PC i have mesage USB Device Not Recognised, I don't no its a problem on my wizard maby i need som files on my wizard beacuse i true to hard reset and nothing i have unlock my device and i don't no what else.
Please help me
did you try to reinstall active sync (for winXP) or windows mobile device center (for windows vista)?
this could really help.
i have same problem i uninstall activesync and still same problem
Hi all,
I try to connect my Xda 2 with PC but I getting sync problemss,
I have Microsoft activsync version 4.5 and I getting following message.
“Cannot verify the version of Activesync on your device, a program such as firewall may b blocking a port activesync uses to connect to device, or you may need to upgrade to more recent version of activesync on your pc”
I uninstalled and downloaded version 4.2 and then getting message only “ Microsoft activesync version is not appropriate with my device”
I am a bit fedup now because I try to solve this problem from last few days.
thank you.
Soha
It won't work, if you have Vista installed on your pc.Neither 4.2 not 4.5.
I have windows xp on PC.
You must shut down firewall when connecting or installing programs via ActiveSync.. I used to have the same problem.. Sorry for my english..
Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much