I have a problem with synchronising with 2nd PC. I upgraded my machine with the WM2003SE ROM DCS provided. The synchronisation was fine with my PC at home, but the problem arose when I tried to synchronise the machine with my office PC.
The pop up windows says the version is incompatible. The ActiveSync version is 3.71 something. My office PC does not have bluetooth, I have always used to go with IR sync. There is pup-up window in my mobile device asking for 'update ActiveSync of your desktop PC'
Is there anyway to fix it? I did not upgrade my home PC.
Thank you.
Is there a way of installing Active Sync without installing or upgrading my computer to Windows XP SP2?
Does your XPsp2 installer not like your XP? :shock:
Why would it not work?
I installed ActiveSync 4.1 on an XP system without SP2 and have had no problems.
How about some error messages? Anything in the logs?
Urban Strata said:
Why would it not work?
I installed ActiveSync 4.1 on an XP system without SP2 and have had no problems.
Click to expand...
Click to collapse
Ditto, 3.7 has worked for me without any problems on XP SP1 since Day 1.
RE
No problem for my notebook running Win XP Pro SP2 and ActiveSync v4.1
Make sure you upgarde your PC/notebook WMP9 to WMP10 before installing ActiveSync 4.1
Triband81 said:
Ditto, 3.7 has worked for me without any problems on XP SP1 since Day 1.
Click to expand...
Click to collapse
Hi. Thanks for the response everyone.
Where can I find version 3.7?
Active Sync 4.0 and 4.1 requires Windows SP2. The problem arises after I upgraded to Windows SP2. I can't connect to my WiFi access point anymore. I disabled every firewall there is and I still could not connect to my access point. Reset the computer and still could not connect. My TH55/E1 and EXEC can, with the exception of my computer. Now I can install Active sync 4.0 and 4.1 without problems but not having the internet access is my down fall. So after installing some stuff I usually run the restore option from previous. So you guys can imagine the trouble I am going through.
cktlcmd said:
Where can I find version 3.7?
Active Sync 4.0 and 4.1 requires Windows SP2. The problem arises after I upgraded to Windows SP2. I can't connect to my WiFi access point anymore. I disabled every firewall there is and I still could not connect to my access point. Reset the computer and still could not connect. My TH55/E1 and EXEC can, with the exception of my computer. Now I can install Active sync 4.0 and 4.1 without problems but not having the internet access is my down fall. So after installing some stuff I usually run the restore option from previous. So you guys can imagine the trouble I am going through.
Click to expand...
Click to collapse
Sounds like very strange behavior. I'd suggest you try to fix your PC rather than installing an old version of ActiveSync. (Your Exec, after all, requires ActiveSync 4.x to synch Windows Mobile 5.)
Urban Strata said:
cktlcmd said:
Where can I find version 3.7?
Active Sync 4.0 and 4.1 requires Windows SP2. The problem arises after I upgraded to Windows SP2. I can't connect to my WiFi access point anymore. I disabled every firewall there is and I still could not connect to my access point. Reset the computer and still could not connect. My TH55/E1 and EXEC can, with the exception of my computer. Now I can install Active sync 4.0 and 4.1 without problems but not having the internet access is my down fall. So after installing some stuff I usually run the restore option from previous. So you guys can imagine the trouble I am going through.
Click to expand...
Click to collapse
Sounds like very strange behavior. I'd suggest you try to fix your PC rather than installing an old version of ActiveSync. (Your Exec, after all, requires ActiveSync 4.x to synch Windows Mobile 5.)
Click to expand...
Click to collapse
Here are the requirements for 4.1.:
http://www.microsoft.com/windowsmobile/downloads/as-sysreq41.mspx
For those who don't need 4.0 or 4.1., 3.7. or 3.8. are available here:
http://www.microsoft.com/windowsmobile/downloads/activesync37.mspx
http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
Here are some troubleshooting tips from Microsoft:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Thanks Triband81.
Right now I've installed all the applications I want so I restored back prior to Windows SP2.
No problem, so you're using 3.8?
Triband81 said:
No problem, so you're using 3.8?
Click to expand...
Click to collapse
No, right now, I've installed all the applications I need using active sync 4.1.
I still could not connect my computer to the internet, so I restored back prior to SP2. I don't need to sync anyway, not unless I have to install something in the future.
Tron_Of_Borg said:
How about some error messages? Anything in the logs?
Click to expand...
Click to collapse
No error messages. It is as if, Windows SP2 cut off my internet connection totally. I have no problem installing nor using Active sync 4.1. I just could not connect to the internet after I upgraded to windows SP2.
Urban Strata said:
Why would it not work?
I installed ActiveSync 4.1 on an XP system without SP2 and have had no problems.
Click to expand...
Click to collapse
I have no idea as to why I could not install Active Sync 4.1 without Windows SP2, it might be a requirement. But it is odd that you were able to install yours.
XP SP1 and Async working fine, both on the lappy and the home computer although im using version 4.0
Whats the exact problem tha you cannot connect to your AP with SP2??
A Commen problem is that the PC cannot get an IP Adress. If this is your problem, install SP2 and after that the "KB893357-v2" Update, this is an optional patch that brings WPA2 and other features to XP, and it fix this WLAN Bug. Patch is here: http://www.microsoft.com/downloads/...FamilyID=662bb74d-e7c1-48d6-95ee-1459234f4483
And yes you need ActiveSync 4.1 for Mobile 5
lutzs said:
Whats the exact problem tha you cannot connect to your AP with SP2??
A Commen problem is that the PC cannot get an IP Adress. If this is your problem, install SP2 and after that the "KB893357-v2" Update, this is an optional patch that brings WPA2 and other features to XP, and it fix this WLAN Bug. Patch is here: http://www.microsoft.com/downloads/...FamilyID=662bb74d-e7c1-48d6-95ee-1459234f4483
And yes you need ActiveSync 4.1 for Mobile 5
Click to expand...
Click to collapse
Thanks very much lutzs! I'll try it right now. I'll post back if it works.
I have my settings on automatic, so it'll detect my access point, that is without SP2 installed and my internet works.
But as soon as I upgarde to SP2 so I can install Active Sync 4.1. My computer can't access the internet saying: "LOW SIGNAL". I tried manually assigning IP addresses, now I saw that windows was able to connect, but still Internet explorer won't work.
Thanks for this update link. I'll upgrade again to Windows SP2, then install the file from the link you suggested. I'll post back with the result. Wish me luck!
lutzs said:
Whats the exact problem tha you cannot connect to your AP with SP2??
A Commen problem is that the PC cannot get an IP Adress. If this is your problem, install SP2 and after that the "KB893357-v2" Update, this is an optional patch that brings WPA2 and other features to XP, and it fix this WLAN Bug. Patch is here: http://www.microsoft.com/downloads/...FamilyID=662bb74d-e7c1-48d6-95ee-1459234f4483
And yes you need ActiveSync 4.1 for Mobile 5
Click to expand...
Click to collapse
Hi lutzs,
I tried this today and it still did not work. Maybe I need to fully reformat my computer. We'll see if I'm in the mood for that. It takes an entire day to reformat my computer and I hate to waste time. Although, I already tried that once before and did not work. Anyway, I restored back to basic windows xp without the SP2 update. Thus, I don't have Active Sync installed since version 4.x requires SP2.
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
Hi everybody!
I'm having some trouble connecting a pocket pc to my pc. I'm getting the following error message from activesync when I try to establish a partnership connection:
"Cannot verify the version of ActiveSync on your device. A program such
as a firewall may be blocking a port ActiveSync uses to connect to the
device, or you may need to upgrade to a more recent version od
ActiveSync on the PC"
Even if I try to cardle a virtual pocket pc (visual studio) I get the above message.
I'm using activesync 4.5 on a windows xp service pack 3 pc. Installing AS 3.8 would solve the connection/partnership problem but I must use AS 4.5 because Visual Studio does not except older versions of AS.
I've tried so far everything: allowed all ports needed for AS (even deactivated the firewall) - I tried to delete the partnership folders but found out that they haven't even been created by AS.
Even google couldn't really help me: most people get this error message because they have installed a HSDPA usb modem driver from hauwei. But I did not.
does anyone have a solution for this strange problem?
thank you in advance!
I have the same problem. I once got into it through My Computer but since then I've had no luck whatsoever!
You have exactly the same problem?
if you're not using visual studio just install active sync 3.8 as mentioned above. But I found an uggly solution: Cardle you pocket pc - you will get the regular error message. then open the taskmanager and kill the process rapimgr.exe and restart it again (C:\Program Files\Microsoft ActiveSync)
Uncardle and recardle the pocket pc again - you will get a critical error message but it can be ignored. Now you will be able to accees your data.
To deploy your software on pocket pc with visual studio you might restart the remote rocedure call locator (Control panel -> administrative tools -> services)
hope I could help you! but I'm really not satisfied with this solution. I'm open for better ways to solve this problem.
When i try to connect my HTC Kaiser to active sync on laptop then ppc show me this message:
"to synchronize this device you must install activesync 4.5 or higher on your desktop computer"
The problem is that i have AS4.5 on laptop. I tried to reintall it but this not solve my problem. Any ideas?
do you have xp or vista ?
I have XP...
After fresh install you need to start ActiveSync manual.
Go to Start, then run ActiveSync.
Make sure wcescomm.exe is running.
Problem is solved. It was firewall problem. When i configured rules for rapimgr.exe file then problem goes away. Thans for your help.