Bricked wing? - Wing, P4350 General

Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?

Pureplaya851 said:
Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?
Click to expand...
Click to collapse
was your phone hardspl'd? did you read how to flash? is it a herald or wing?

What rom were you trying to flash? try to get into the bootloader mode and reflash the original rom, Use this link if its a WING http://forum.xda-developers.com/showthread.php?t=321717 , to get into bootloader softreset while holding down the camera button, it will come up to a colorful screen with ipl and spl information... While in this screen connect the device to the computer and reflash..

i tried that but i doesn't wrk on my phone for some reason. please help me!!!!!!

hard reset?

Related

desperated

hello. i have an o2 i-mate jasjar phone. i updated my rom and since then my phone wont start up.
i tried going into bootloader mode and re-installing any rom that i could find with that mtty program, even with the original rom, the
the rom installs just fine, but when i do the hard reset the phone goes up to the start up screen showing
the rom info and just stays there.
i also updated the bootloader from v1.00 to v1.01 to see if that fixes anything but no luck.
does anyone have a clue of what is going on?
p.s when i connect the phone with ac power the led that shows if the phone is charging wont light up. dunno why! :S
PLEASE HELP ME!!!
does anyone has a clue of whats going on???
i really need some help here please!!
there are some progs on wiki. Instructions for those stuck on bootscreen.
i am not stuck on boot screen. i am stuck on the screen that shows the ram info, i think its called splash screen....
can somebody help me?

I brick my htc wizard help please i do not know what to do!!!!!

I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......
brick...
chipis said:
I BRICK MY HTC WIZARD... CAN SOME ONE HELP ME PLEASE???? I OWN A HTC WIZARD FROM CINGULAR 8125 POCKET PC. RECENLY I TRYED TO FLASH MY POCKET PC BUT SOMETHONG HAPPEND.... IT JUST STAYS ON THE CINGULAR LOGO..
IPL 2.21.0001
SPL 2.21.O1ip
GSM 02.25.11
OS 2.18.0.0
AND IT JUST STAYS THERE.....
PLEASE HELP......
Click to expand...
Click to collapse
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck
Thank for answer me and understand what i ment
Ok what software you recoment?. I do not know if i have a unlocked phone but i do know that i used it with t-moble even that my pocket pc is for cingular, i went to those stores that unlocked phones and that it
Help.
I have a Wizard G4 and I tried to install a WM6.5 ROM (TechTeamup Mega Wizard rom) from the default WM5. I did not put in the hard-spl (as I now read) before I tried to flash. Now when it boots, I go strait to the flash screen (tri-color) screen. I tried ot run the hard-spl-G4 and it says it cannot find a device. I have tried to re-flash back to WM5 ROMs that I have found, however it says it cannont complete "ERROR 296: UPGRADE ONLY, which makes me belive I need a G4 Wizard ROM that is a full (not upgrade). What steps should I take now to revert back to a WM5 so I can re-try the "unlock" hard-spl proceedure to make the phone WM6 compatible?
Anyone have any suggestions?
IPL 2.28.0001
SPL 2.28.0001
Download the original ship ROM for your phone.
Turn the phone off.
Press and hold the Camera key, now insert the USB cable, Keep holding the camera key until you get the boot loader screen.
Now run the ROM update to flash back to WM5.
ricozy said:
I try to answer... (sorry for my bad english)
1. Make sure your battery up to 50%, 100% is recommended...
2. turn off u'r PPC
3. press camera,talk, and power button at the same time for a second until your display show 3 colour....
4. plug your cable data from PPC to desktopPC, and make sure your display show "USB", and try to re-flash with other ROMS.....
Good Luck
Click to expand...
Click to collapse
I brick my wizard too... What happened was I flashed my own cook of m6r5 it say successful but on reboot, it shows htc logo then stays ay tricolor screen:
IPL 2.26
SPL 2.26
Bootloader wont work..tried many times but I cannot connect to PC...
Tried ricozy post above, can access 3 color... but still cannot connect to PC...
Please help...anyone..
IF u can enter bootloader...connect to pc...u shud c "USB" written in the left bottom corner ...then flash a rom as usual

help

install a wrong rom or bad now pc cant find it and screen stay on white i still can go to the boot screen
T-mobile Mda Thanks
TheGreatRudy said:
install a wrong rom or bad now pc cant find it and screen stay on white i still can go to the boot screen
T-mobile Mda Thanks
Click to expand...
Click to collapse
Hard-Reset the device or if that don't work try to get into bootloader and flash it again.

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

Stuck on HTC Logo Screen

I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!

Categories

Resources