Database Users

Bluetooth Chat with: BuZZone

Hi all I would like to get this application working but it does not look like the test application works on our XDA's?? :-( It is saying somthing about needing the WIDCOMM drivers.... Any idea if there is an esay and safe way to get this utility working?
Hear is the web address of where you can find the application:
http://www.buzzone.net/eng/index.html
Thanks guys

Just install the latest Widcomm PPCPE drivers in "Hacking It"

Thanks for the reply rahjinoh, I will give that a go, I did see somthing about Widcomm drivers but when i looked into that option it seemed very complicated and a number of people where having problems with the XDA II with it would I be correct in saying that?
I'm a little scared to install it if its going to cause me any problems as I use a Bluetooth GPS (with Destinator 3) as well as the O2 Bluetooth headset (The new one, works like a charm)... I use both these bluetooth devices on a daily basis and cant affort them to go down.
Any idea if I will run into any problems if I install this Widcomm driver?
How does it work?
Do I have 2 bluetooth drivers installed then? both MS and Widcomm?
Sorry for all the questions would like to try and find out if it is a simple process or if I could run into problems....
Many thanks!

The Widcomm works with everything EXCEPT headsets.
The GPS would work with Widcomm but not the O2 headset, not yet at least.
Both the stacks will coexists and you can turn on 1 at a time.
I use that stack as well, some people get the "Cannot initialise bluetooth hardware" once in a while, but mine's fine.
I used the Widcomm with Widcomm related software, otherwise, my MS Bluetooth stack is on most of the time.
I use the MS one for my Motorola Headset and Bluetooth GPS, and the Widcomm one for other purposes, like BuzzOne
just remember that you can only enable 1 stack at a time

thanks for the reply rahjinoh
This sounds like a lot of messing around unfortunatly, I wish bluetooth would come up with some starndards and stop stuffing around so much, its going to die in the long run if they don't I recon. I've read that the makers of bluetooth have not stoped any research and devolopment with the technology (Sony/Ericson) this does not seem to be a good step but I don't blame them really as the software side of things is a compleat MESS!!!
Is Microsoft going to be fixing up there drivers? or has the problems been fixed in the Newer Windows 2003 SE Phone Edition? (Which I hope is going to be comming out for our XDA II's some time soon??)...
Cheers!!!

Any more news any one? any ideas what I can do to get my Bluetooth GPS, Head Set and Software Programs to work with ease and no problems?

Still no news??? ANY ONE???

Has any one mannaged to find an easy way to get this program working as yet?

still no news or any ways to get this software working is there? I need a solution that will work with my Bluetooth GPS (and current software, Destinator 3), Bluetooth Headset as well as this program...
Any thoughts any one?

Might want to read this...
http://www.buzzone.net/forum/viewtopic.php?t=12

Thanks for the reply Nighthawk...
I have seen that post before, but what I am worried about is that I've noticed that people on XDA-Forum has posted that you cannot use your Bluetooth Headset if you don't use the MS Stack? Is this correct?
I use a Bluetooth - GPS, Headset and software... Will I have any problems with these?

easiest way to configure internet bluetoothsharing
get widcom drivers from this site
http://forum.xda-developers.com/download.php?id=1436
then put all these files in your pocket pc windows main folder
\Windows.
go to file explorer of your pocket pc and extract these thre which you downloaded or run these files from your pocket pc..
now your bluetoth manager is installed. then just go to this site
and learn step by step to configure your pocket pc for intenet connection sharing with your desktop
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=32&PN=1
i think its the easiest way to do in min not hours
best regards for all my brothers.

Thanks for the reply maani_ch, great advice, only 1 question... If I install these drivers. Do you know if I can still use my Bluetooth GPS with my Bluetooth Heatset at the same time as I do at the moment???
As well as both of them working of course!
CHEERS!

Good question Guest, thats exactualy what I would like to konw, I'm a little scared to install stuff on my XDA now days as in the past I've learned that sometimes things just stop working after installing some applications and it's hard to find out what it is (as it is normaly combinations of things)... As I use it for work it's hard to afford any down time with my phone...
Any answers to the previous questions as to how it would work with Bluetooth GPS and Bluetooth Head set at the same time?

SSA connection is problem...Can any 1 help with a solution?

I have a quetion! How can I remove the first bluetooth icon that I have?

eFiend said:
I have a quetion! How can I remove the first bluetooth icon that I have?
Click to expand...
Click to collapse
HKLM\Services\BTIcon
"Dll"="BTIcon_Dll.dll"
change this in:
"Dll Disabled"="BTIcon_Dll.dll"
(thanks to Cyber_mate)

A2DP for WM5 coming soon...

I'm looking for a way to redirect my TomTom voice instructions from my MDA Vario through my Parrat CK3300 BT carkit sounding on my car-speakersystem by using the bluetooth stack. Now Parrot claims this isn't possible due to a phone limitation. I agree and think it's shortage of Microsoft WM5. Now I've looked up some info about Bluetooth Audio Distribution and found the following:
Advanced Audio Distribution Profile (A2DP)
AKU 2.0 for Windows Mobile 5.0 (for both, Smartphone and Pocket PC), which is expected to be released early next year (2006), will also includes support for the Bluetooth Advanced Audio Distribution Profile profile which is designed to transfer a stereo audio stream like music from the device to a headset or car radio.
A2DP is already implemented into the Samsung SGH-i300 Windows Mobile 2003 Second Edition Smartphone, however this isn't based on Microsoft's A2DP implementation but Samsung added it itself.
(Refer to http://www.theunwired.net/?itemid=2779 for more info concerning this subject.)
So if this article is based on true facts, it means that Microsoft will soon release a patch for all WM5 based devices, which enables them to receive all audio (e.g. TomTom voice instructions) through the bluetooth stack.
Somebody knows more about this subject and if it's true that after having AKU 2.0 installed, you can hear the navigation instructions through your carkit or headset?
Many thanks,
Youri Festen

there is a facility on this forum that will allow you to switch audio to and from the bluetooth, not high quality or stereo but standard quality.

There is ?
Been loking around in the threads for quite a while, but didn't find a replicatable solution...

Here you go

Tried all kind of files, but no go...
All i want is ALL audio over the Carkit (Supertooth2). That is TomTom + Phone.
I don't care if i have to trun of the carkit to return audio to the phone. But i don't want to have to reset or something.
I have a XDA (Himalaya) btw. Still with Rom 1.72 00WWE 15/03/2004 (Ext Rom 1.72.125)
Tried all these :
BA_OEM_AudioGW.CAB
BA_WM5_Voice_Dialer_2.cab
BCHS_FOR_POCKET_PC_OZONE[1].ARMV4.CAB
Broadcom Corporation BT-PPC AV.cab
Broadcom Stack + Switcher + Icon.zip
BroadcomCorp_BT1.0.0.3900.cab
BTAGExtModule-2.zip
btagextmodule.zip
btaudio.zip
MS-BT-107.ARMV4.CAB
SCO settings all BT.txt
voicedial2.rar

whoa it worked
i know im reaching here, but really wanted to try to stream to the new cingular 2125 (aka hct). downloaded and ran the app with my iphono steroe headphones (luv em), got intresting results.
it worked. ran the app, pushed the button on the headphones, got music. call came in, answered (with auto answer) talked, and on hangup it went back to music. however, if i ran another app on the phone such as voice tag in contacts to initiate a call, it brought in the call, but on hangup went back to the speaker. had to run the toggle on again to get headphones working, not elegant - always want more - but im a happy guy til a2dp comes out for mobile 5. thanks!

try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need

Scollinguk said:
try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need
Click to expand...
Click to collapse
Try reading and understanding what you read before posting. See the post of dalamario that is the BTAudio on/off tool !
Is this goingt to be anter shout and wild guesses about what file or tool should "really"work ?
I tried all so called "easy" fixes, hell, i've even got a whole dump of my registry, cut through all the BT + Audio and BT + Headset threads, here and on PDAPhonehome, Howardsforum, and the reduced-to-user-bla-bla on pocketPC-club.nl.
And still zilch.....
Ow, and don't think i'm someone who wants easy answers... Think again, i've been around quite a while on PPC forums and the lot....
What i do want/like is usefull answers ans clues on how this BT and Audio stuff works, beut even after reading some on MSDN i can't find a solution yet....
That's why i jumped in on this thread, i'm not going to reinvent the wheel if some allready has the solution: Tomtom and Phone audio over BT
So i'll stop writing now, and continiu searschin for a solution... There must be one...

Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.

The Wizard can do system Audio over bluetooth.
This has been proved with the easy hack that allows you to activiate voice dial using a BT headset.
http://forum.xda-developers.com/viewtopic.php?t=29837
MS Voice Command leaves the Audio Gateway open after initialising, whilst Voice Dialler closes it.
So maybe try installing Voice Command and doing the hack in the above referenced thread, and then see if you can launch Voice command from your car kit. This should leve the gateway open and allow all system sounds to stream to your BT kit until you hit the button again.

jpiek said:
Try reading and understanding what you read before posting.
Click to expand...
Click to collapse
Try keeping Himalaya talk in the Himalaya forum then. Posting questions about devices in the wrong forums just causes confusion.

Scollinguk said:
Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.
Click to expand...
Click to collapse
Not Mr High Horse, but didn't you look at what you where posting ? You should know it linked to the same file, right ? If not, you really would just be 'shouting' ...
It's just that i've been reading XXX threads, and just about everyone comes up with the same, useless, files... Like nowbody really knows how it works and waht should be done to make Audio over BT possible...
We here are all trying real hard for months now, you see....

Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.

[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
where is it? i want it! i need it!
ready to test.

Can't share it.

[CpD said:
bob]Can't share it.
Click to expand...
Click to collapse
spoil sport
i won't tell anyone,
got motorola ht850 headphones.
have one question whilst here,
when i am on the underground the headset give a beep to tell me i have no network signal? you may not know the answer but would this over ride the bluetooth stereo signal?
p.s. send me your bank details for the transfer :wink:

[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
Do you think that when it works with I-Phono, it will also offer us the navigation voice instructions through BT-headsets or carkits? Hope so!

Can't test it with car navigator.

if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:

aliendad said:
if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:
Click to expand...
Click to collapse
It's nice.... I'd really like Tomtom over my carkit... Ohh, the XDA was so much easyer just soldered a Ground and Left/Right channnel into my TomTom/Leadtec connector, and plugged it in to my JVC Front-in line...
I bought the Qtec 2020 because BT seemd so much easyer

Nokia bluetooth headset with PPC-How to run

Hi friends I am using ORange SPV3100 device[Hermes] I got a nokia bluetooth headset, but I could not able to use it as my device couldn't able to find it. I dont know what things I need to do to get this accessory work for me. I am helpless as there is no guide available for this problem. My Device supports BT 2.0 with A2DP. Which company headset works best with this phone & anything more. Thanx
Saksham Katyal

You might wanna post this in the HERMES ACCESSORIES forum?

Junner2003 said:
You might wanna post this in the HERMES ACCESSORIES forum?
Click to expand...
Click to collapse
Sorry in a hurry I forget to put it in a right place. I did search & found most of similar queries posted here. Any moderator can do that for me. Any solution about my problem?

Usually you have to set the bluetoon headset device to pairing mode, then you phone can find it.
how to do that will very from device to device. You need the manual or call Nokia about it.
If you already did that double check to make sure you did it right. If that not it, I dought any of us are going to know how to fix it. Return/excannge get a different device.
Good luck...

Ford Sony connecting to Wizard

Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry

bazza1603 said:
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
Click to expand...
Click to collapse
Ford's probably using stereo bluetooth for its connection. You need to enable your phone with A2DP first, then do the pairing. I have had good luck with the Tornado version of A2DP for the Wizard, but only after I overclocked my phone's processor, and made some minor adjustments to the data rates at a registry level.
If you're a noob, you need to do a LOT of reading before trying this, or you'll lose your ability to generate sound altogether. Not as dramatic as bricking your phone, but makes it almost as useless...
Just search these boards, the answers are here. Search.
...and welcome to the XDA Dev boards!

Hi,
Thanks for the reply..was just starting to look at New phones!
My current Rom is 2.21.4.1.WWEwhich is the latest O2 one.
Rom Date3/9/06
Radio 02.07.10
Which Rom would people recommend updating to?
Regards
Barry

...the worm turns.
bazza1603 said:
Which Rom would people recommend updating to?
Click to expand...
Click to collapse
Normally, this is where I say, "Start a new thread, for this new question, because nobody is going to open this thread to answer that question."
However, you've asked a question that usually results in the person asking being lambasted (read: flamed) for asking a question that is, in most cases, a matter of total opinion. As has been said many times before, about this subject:
What's best for you isn't what's best for (nearly) anyone else.
Click to expand...
Click to collapse
So....that said, I recommend you look at the Wizard Mobile 6 boards, read the Wizard wiki THOROUGHLY, and know your phone very well before you even consider trying to load a cooked ROM, or you will have an expensive paperweight instead of an incredibly useful tool.
Whatever you do, please do not post a question like "What's the best ROM for me?" because only YOU can answer that question, and only after you educate yourself to what's possible, and what your specific needs are.
If you just want to sync your phone to your car, then stick with the A2DP upgrade, and an overclock (OMAPCLOCK via SmartsKey is my preferred method of overclocking). That's my advice, free of charge.

Could anyone help me find a A2DP upgrade. I have honestly hunted, but I am getting confused...
Tried Torbado A2DP without success. I run a 02 Mini S
Regards
Barry

Hi
I have got Stereo headset now showing, but its greyed out for the radio device?
Anyone got any ideas?
Regards
Barry

I would highly recommend looking at JETWare BT Extenstion. It adds a lot of functionality that MS left out of the BT stack.
http://www.jetwaremobile.com/

Hi,
Got it working....
With other phones they were pairing automatically. If you search from the radio
Phone >menu then search, after a long wait it finally pairs...
Installed http://www.jetwaremobile.com/ which may have helped...
Thanks for everyones help.
Regards
Baz

bluetooth stereo g3 wizard

Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.

Can any1 help me with this.

Doesnt anybody have any information on this topic.

Dude. Patience.
This site is analogous to a bulletin board, not to a chat room. Sometimes, it takes days before someone with the right answer to your question reads your post. Sometimes, it never happens....and you will almost always find answers if you run a search. You certainly aren't the first person to try upgrading the bluetooth on a Wizard.
To answer you, Yes. There are several options available, ranging from difficult (manual editing of your registry) to easy (load a .cab file or two) to way overdoing it (loading an entire ROM just to get BT stereo) with varying degrees of popularity and success throughout the user population.
I have heard this works on some Wizards:
http://forum.xda-developers.com/showthread.php?t=263745
When I was using WM5 only, I used this successfully:
http://forum.xda-developers.com/showpost.php?p=931212&postcount=1
If you're in love with the idea of flashing an entire ROM for more reasons than just stereo bluetooth, do some reading first, and make sure the ROM you want has "A2DP" capabilities, or you'll be right back here looking at my suggestions again.
Welcome to XDA, and please don't forget to search before asking questions. You'll often save yourself a lot of time and frustration.

edge200is said:
Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.
Click to expand...
Click to collapse
BLuetooth stereo is built into the Wizard, with the standard ROM, at least on my T-Mobile (USA) MDA
You just need a BT stereo headset.

Thanks Myrddin Wyllt for the welcome.
Sorry about my impatience i would just like to say what a gr8 forum and you guys are doing amazing work. Been spending hours reading all the post and I hate reading so this is definitely good stuff.
Thanks