Related
hey guys anyone know how to disable the mic on the device when using a bt handsfree, when not in a call? thanks in advance
anyone???
heloooooo
#1: Don't bump your thread three times in one day, it pisses people off, and you won't get any help.
#2: Why would you want to disable it if you're not in a call anyway?[/list]
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
no u st**pid f**k!!! read the other thread before opening a new thread!!!
neckarb said:
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
Click to expand...
Click to collapse
thats bcoz we don't support lazy a** like u! read the project VCABT its absolutely clear there!!
i have read it and found no mention of disabling the mic. thanks for the help though, real usefull.
so i still havent got an answer then?
i use a BT headset and its not even connected when not in a call.. only when i make a call or recieve a call does the phone connect to the headset... so i dont know what your askin for.. sorry
i am asking the fantastically simple question, how do you turn the microphone on an imate JAM OFFFFFFFF!
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
Click to expand...
Click to collapse
thank you so much mate your the first one with a straight answer, thank you again.
The microphone's not active if you're not in a call anyway. The only possible reason you'd need to turn the mic off is if you're in a call (there's a mute options for it), or if you were recording, in which case, stop recording. Please FOAD, and stop treating people as if they were put on earth to answer your pointless pathetic questions!
its because im using bt ms voice command, which leaves the mic on the magician on while im using the headset for voice command.
use Fring for windows mobile on my Trinity.
It's quite convenient to have so many different messengers in one unique soft.
But I can't find a way to change my status from online to let's say, away, invisible, busy etc.
Anyone can tell me how to do?
Or maybe someone can confirm that it is impossible to do it?
bump, as having searched for it i still cant find an answer!
Andehh said:
bump, as having searched for it i still cant find an answer!
Click to expand...
Click to collapse
Since then I found the answer on Fring website:
There is no way (so far) to change status on Fring on windows mobile system.
The function is available for symbian systems but not for PPC.
It is supposed to be implemented in future versions, but hasn't been released so far.
I´m sorry dude but this is toooooo much....the thread is named Trinity Mobile 6....this forums are gone to far.....Sorry if I am mean to you...but come on....use flipping Google....
I don´t care if your xda has wm6,don´t try to get any help related to Fring....I know you do whatever you want...and you are free to ask.
1)
you are not mean to me since your post is irrelevant and meaning-less, so for me it doesn't even exist.
2)
I know it is a wm6 thread, but if you check thouroughly, you'll notice there is always reference in this thread to some common soft (such like instant messengers), and even more particuliar ones such as vibrators etc. and comments and help come though.
3)
when I posted this topic, I did the same in the General thread of the forum, just in case, and no more help came by that time.
So I guess it is not a matter of thread, but just a lack of interest, knowledges or time.
4)
In any case I found the answer and since unlike you I'm not unhappy enough in life to become mean on such little things, therefore It was my pleasure to help Andehh a hand, or anyone else who would come across this information about Fring's version.
If your Pioneer car stereo which you bought at Walmart is broken, do you go to your car dealer for warranty, or to Walmart?
Think about it!
esackbauer said:
If your Pioneer car stereo which you bought at Walmart is broken, do you go to your car dealer for warranty, or to Walmart?
Think about it!
Click to expand...
Click to collapse
Who talked about warranty?
It was only a matter of functionality ON WM6.
Therefore, there is not only questions about the ROM itself but also about the way it works on our devices and its compatibility with some softs.
Just exchange of information and experience. It's not about seeking for seller responsability but more about something called free help and exchange.
Something u never heard about, I know.
Doesn't matter, Andehh and I understood and had that exchange.
No flooding about your car warrant please!
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
bazza1603 said:
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
Click to expand...
Click to collapse
Ford's probably using stereo bluetooth for its connection. You need to enable your phone with A2DP first, then do the pairing. I have had good luck with the Tornado version of A2DP for the Wizard, but only after I overclocked my phone's processor, and made some minor adjustments to the data rates at a registry level.
If you're a noob, you need to do a LOT of reading before trying this, or you'll lose your ability to generate sound altogether. Not as dramatic as bricking your phone, but makes it almost as useless...
Just search these boards, the answers are here. Search.
...and welcome to the XDA Dev boards!
Hi,
Thanks for the reply..was just starting to look at New phones!
My current Rom is 2.21.4.1.WWEwhich is the latest O2 one.
Rom Date3/9/06
Radio 02.07.10
Which Rom would people recommend updating to?
Regards
Barry
...the worm turns.
bazza1603 said:
Which Rom would people recommend updating to?
Click to expand...
Click to collapse
Normally, this is where I say, "Start a new thread, for this new question, because nobody is going to open this thread to answer that question."
However, you've asked a question that usually results in the person asking being lambasted (read: flamed) for asking a question that is, in most cases, a matter of total opinion. As has been said many times before, about this subject:
What's best for you isn't what's best for (nearly) anyone else.
Click to expand...
Click to collapse
So....that said, I recommend you look at the Wizard Mobile 6 boards, read the Wizard wiki THOROUGHLY, and know your phone very well before you even consider trying to load a cooked ROM, or you will have an expensive paperweight instead of an incredibly useful tool.
Whatever you do, please do not post a question like "What's the best ROM for me?" because only YOU can answer that question, and only after you educate yourself to what's possible, and what your specific needs are.
If you just want to sync your phone to your car, then stick with the A2DP upgrade, and an overclock (OMAPCLOCK via SmartsKey is my preferred method of overclocking). That's my advice, free of charge.
Could anyone help me find a A2DP upgrade. I have honestly hunted, but I am getting confused...
Tried Torbado A2DP without success. I run a 02 Mini S
Regards
Barry
Hi
I have got Stereo headset now showing, but its greyed out for the radio device?
Anyone got any ideas?
Regards
Barry
I would highly recommend looking at JETWare BT Extenstion. It adds a lot of functionality that MS left out of the BT stack.
http://www.jetwaremobile.com/
Hi,
Got it working....
With other phones they were pairing automatically. If you search from the radio
Phone >menu then search, after a long wait it finally pairs...
Installed http://www.jetwaremobile.com/ which may have helped...
Thanks for everyones help.
Regards
Baz
Is it possible to connect two BT devices at the same time to BA 6.5? E.g. BT headset and external GPS?
Because I want to hear the direction thru my BT headset, and every time I connect the headset, the GPS connection fails.
ramicu said:
Is it possible to connect two BT devices at the same time to BA 6.5? E.g. BT headset and external GPS?
Because I want to hear the direction thru my BT headset, and every time I connect the headset, the GPS connection fails.
Click to expand...
Click to collapse
ou seem to be new to the forums. Thank you for joining XDA-Developers.
Please take a minute to go over the Rules and Regulations of the forum.
Also, it seems that you are a Blue Angel owner, in which case I will encourage you to go over the BA forum regulations here
For questions, please use the search function in the site or simply Google for an answer. More than likely, your question has probably been answered before and the answer is floating around somewhere in the site. That being said, unless you are contributing to the site with either skins, roms, ports, new applications, programs, games, etc., please [highlight]do not[/highlight] open new threads. However, if you do have questions, you can post them either in the BA Q&A section or in the General Q&A section.
Thanks.
egzthunder1 said:
For questions, please use the search function in the site or simply Google for an answer. More than likely, your question has probably been answered before and the answer is floating around somewhere in the site. That being said, unless you are contributing to the site with either skins, roms, ports, new applications, programs, games, etc., please [highlight]do not[/highlight] open new threads. However, if you do have questions, you can post them either in the BA Q&A section or in the General Q&A section.
Thanks.
Click to expand...
Click to collapse
Sorry egzthunder - but I did all this for some time now.
None of my searches found a working solution for this problem.
And this forum is the only one related to BA only (and not all those "NEW" devices )
I do think that I should "rephrase" my Q:
After connecting my GPS ant to my device, and opening IGO8 software, everything works OK. The moment I press "ON" my BT headset (Jabra BT5010) the GPS connection drops dead.
I tried all the "solutions" mentioned around, none worked.
Also- they all refer to WM5 and 6, NOT WM6.5
Your thread is nice, but with no answer in it...
Thanks
Ramicu
In BA Bluetooth 1.1. For multi-connections needs Bluetooth 2.0. :-(
It`s unreal.
McFlyH said:
In BA Bluetooth 1.1. For multi-connections needs Bluetooth 2.0. :-(
It`s unreal.
Click to expand...
Click to collapse
This is not the problem, as I connected two devices with my old IPAQ 6340 and he had BT 1.1 also.
i think it's something with the 6.5 "CR_K_D" rom or RADIO
(I'm using radio1.15.00 and rom 21139)
No, BT1.1. not working with two devices in the same time !
BT 1.1 is working flawlessly...
McFlyH said:
No, BT1.1. not working with two devices in the same time !
Click to expand...
Click to collapse
Sorry , but you are wrong.
I have done a simple test:
I took a brand new SX66 with WM2003, radio1.02 , and installed nevigation software on it. Next- I connected the GPS AND my BT Jabra headset to the sx66- both worked great, and I was able to hear the nevi directions thru the headset...
Same thing with my (VERY OLD) Ipaq machine...
So the problam is with x-plode rom. not the hardware... :-(
Maybe you right, if uses two different profiles will (must) be work.
But if uses one profile -no , ex. GPS and DUN (over COM)
Auto redial through bluetooth headset is really a pain with new headsets with soft buttons.
When the earphone is in pocket many times the last call redial function is accidentally enabled.
Any chef any solution??
Thanks
I have no idea, but this isn't really a cooking question, as far as I can tell. It's probably better off in the Q&A forum, but I'll leave it here for now. Someone else may well have figured out how to do it (who doesn't cook roms).
EDIT: Wrong forum, ignore below unless you are on Android.
I too would like to disable last call redial on BT headsets. The best I have found is a program called "call confirm" which makes you confirm each time you want to make a phone call. Haven't tested it yet as it's actually for my father (I don't use a BT headset) but could be a good temporary fix. Otherwise I have not found any other solution.
http://www.appbrain.com/app/net.nanabit.callconfirm
Look at this: http://headsetbutton.com/
Maybe it could be an alternative while someone develops a free tool to manage that.
Trail is fully functioning for 21 days...but i think it's worth to pay 5.95 EUR for that.
Btw...thanks to funkwerk for the hint.
reallynotnick said:
I too would like to disable last call redial on BT headsets. The best I have found is a program called "call confirm" which makes you confirm each time you want to make a phone call. Haven't tested it yet as it's actually for my father (I don't use a BT headset) but could be a good temporary fix. Otherwise I have not found any other solution.
http://www.appbrain.com/app/net.nanabit.callconfirm
Click to expand...
Click to collapse
This application is for android only!
Thanks anyway
icke said:
Look at this: http://headsetbutton.com/
Maybe it could be an alternative while someone develops a free tool to manage that.
Trail is fully functioning for 21 days...but i think it's worth to pay 5.95 EUR for that.
Btw...thanks to funkwerk for the hint.
Click to expand...
Click to collapse
This is for wired headset.
Thanks anyway.
Farmer Ted said:
I have no idea, but this isn't really a cooking question, as far as I can tell. It's probably better off in the Q&A forum, but I'll leave it here for now. Someone else may well have figured out how to do it (who doesn't cook roms).
Click to expand...
Click to collapse
I agree with you.
There is a similar application editing the bluetooth drivers.
But this editing applies only for microsoft bluetooth not widcomm drivers that uses the htc.(i have the Leo)
Thanks for your message.
NIKOSXRI said:
This application is for android only!
Thanks anyway
Click to expand...
Click to collapse
Whoops, my apologies, I was just googling "android bluetooth last call redial" and didn't check which section I was in....
I can't believe neither platform has the ability to fix this. The only other option would be to find a different headset, like my father used to have a Motorola BT headset with a collapsable boom and when shut the buttons did not do anything though it would stay connected.
Well best of luck in your continued search.