hey guys anyone know how to disable the mic on the device when using a bt handsfree, when not in a call? thanks in advance
anyone???
heloooooo
#1: Don't bump your thread three times in one day, it pisses people off, and you won't get any help.
#2: Why would you want to disable it if you're not in a call anyway?[/list]
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
no u st**pid f**k!!! read the other thread before opening a new thread!!!
neckarb said:
this is the fourth forum i have asked this fairly simple question and i have not once recieved a yes or no answer, i havent recieved any answers ive recieved questions i.e. why do you wanna do that. what for, who are you, etc etc please someone just tell me
Click to expand...
Click to collapse
thats bcoz we don't support lazy a** like u! read the project VCABT its absolutely clear there!!
i have read it and found no mention of disabling the mic. thanks for the help though, real usefull.
so i still havent got an answer then?
i use a BT headset and its not even connected when not in a call.. only when i make a call or recieve a call does the phone connect to the headset... so i dont know what your askin for.. sorry
i am asking the fantastically simple question, how do you turn the microphone on an imate JAM OFFFFFFFF!
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
neckarb - I'm sorry you're getting so stressed mate. I'll tell you what I know, and I hope it helps.
Basically, it's not possible to have manual control of the microphone. There's no sound mixer controls manually accessible to users, so no, you can't switch it off easily. However, if you want to try and figure out if there is a more technical way to do this, look into the Multimedia SDK on MSDN.
Vijay
Click to expand...
Click to collapse
thank you so much mate your the first one with a straight answer, thank you again.
The microphone's not active if you're not in a call anyway. The only possible reason you'd need to turn the mic off is if you're in a call (there's a mute options for it), or if you were recording, in which case, stop recording. Please FOAD, and stop treating people as if they were put on earth to answer your pointless pathetic questions!
its because im using bt ms voice command, which leaves the mic on the magician on while im using the headset for voice command.
Related
I know... there are some things written abt this earlier but I really need to sort this out now. As I understood I can use, for example Cyberon voice dialer with the magician/s100. Am I right to think that there is NO WAY that you can activate the voice dialer by pressing the button on the BT handsfree device?!?
This is the only thing that I still haven´t figured out abt this so PLEASE... enlight me! If there is anyway that this bug can be fixed, I would highly appreciate any tips regarding this!
Thanks a lot!
Re: Bluetooth and handsfree... sort this problem out for me!
emil73 said:
I know... there are some things written abt this earlier but I really need to sort this out now. As I understood I can use, for example Cyberon voice dialer with the magician/s100. Am I right to think that there is NO WAY that you can activate the voice dialer by pressing the button on the BT handsfree device?!?
This is the only thing that I still haven´t figured out abt this so PLEASE... enlight me! If there is anyway that this bug can be fixed, I would highly appreciate any tips regarding this!
Thanks a lot!
Click to expand...
Click to collapse
The MS Bluetooth stack is pretty primative and doesn't support this kind of stuff. The WIDCOMM stack is better, but no one has written a driver for the Magician.
I installed the Toshiba stack for a while, and it was wonderful - the rings came into the headset, for example. But while I could pair the headset, the phone would not answer a call. Sorry...
Ok, meaning there aren´t any known way that we can go around this small problem. Guess I have to take out the phone and say my nametag to the phone and then put it back and talk in the handsfree. Well, of course it works even though it is a bit annoying...
emil73 said:
Ok, meaning there aren´t any known way that we can go around this small problem. Guess I have to take out the phone and say my nametag to the phone and then put it back and talk in the handsfree. Well, of course it works even though it is a bit annoying...
Click to expand...
Click to collapse
Yes, that is exactly what I do. However I put the phone away when not dialing. The handsfree will answer the phone, just won't transfer voice dialing commands.
Ok exactly the same I do then. Thanks for your reply. At least I know there is no point in trying to get it work, as for now....
Have a read of this thread: http://forum.xda-developers.com/viewtopic.php?t=31515
hi!
i'm using the xda mini s, with the latest upgrades by o2. very nice stuff this pocketpc... =)
But: I build myself a direct audio connection to my car radio to listen to the music over the car loudspeakers. when someone calls me, i can also answer this call, but it takes me certain time to enter the free speaking mode, so that the other one can hear me. i will hear him over the car loudspeaker from the beginning...
is there a possibility to activate free speaking automatically or manually before i answer the call? does someone know a proggi / hint to switch to free speaking steadily?
thanks a lot for answers... greetz, bene
Are you referring to the Speaker Phone function??
If so, I run PocketMax PhoneAlarm
It allows you to define various 'Profiles' to allow certain configurations under different circumstances.
One of the features is that it will automatically turn on the speaker phone when you answer a call.
Hope that helps.
hi jerry-s!
thanks a lot for that competent answer! i just tested the 30-days trial and was very surprised about the possibilities the program offers! wow....
i'm really convident with this forum!!
good night (good fight ;-) ), bene
Hi friends I am using ORange SPV3100 device[Hermes] I got a nokia bluetooth headset, but I could not able to use it as my device couldn't able to find it. I dont know what things I need to do to get this accessory work for me. I am helpless as there is no guide available for this problem. My Device supports BT 2.0 with A2DP. Which company headset works best with this phone & anything more. Thanx
Saksham Katyal
You might wanna post this in the HERMES ACCESSORIES forum?
Junner2003 said:
You might wanna post this in the HERMES ACCESSORIES forum?
Click to expand...
Click to collapse
Sorry in a hurry I forget to put it in a right place. I did search & found most of similar queries posted here. Any moderator can do that for me. Any solution about my problem?
Usually you have to set the bluetoon headset device to pairing mode, then you phone can find it.
how to do that will very from device to device. You need the manual or call Nokia about it.
If you already did that double check to make sure you did it right. If that not it, I dought any of us are going to know how to fix it. Return/excannge get a different device.
Good luck...
Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.
Can any1 help me with this.
Doesnt anybody have any information on this topic.
Dude. Patience.
This site is analogous to a bulletin board, not to a chat room. Sometimes, it takes days before someone with the right answer to your question reads your post. Sometimes, it never happens....and you will almost always find answers if you run a search. You certainly aren't the first person to try upgrading the bluetooth on a Wizard.
To answer you, Yes. There are several options available, ranging from difficult (manual editing of your registry) to easy (load a .cab file or two) to way overdoing it (loading an entire ROM just to get BT stereo) with varying degrees of popularity and success throughout the user population.
I have heard this works on some Wizards:
http://forum.xda-developers.com/showthread.php?t=263745
When I was using WM5 only, I used this successfully:
http://forum.xda-developers.com/showpost.php?p=931212&postcount=1
If you're in love with the idea of flashing an entire ROM for more reasons than just stereo bluetooth, do some reading first, and make sure the ROM you want has "A2DP" capabilities, or you'll be right back here looking at my suggestions again.
Welcome to XDA, and please don't forget to search before asking questions. You'll often save yourself a lot of time and frustration.
edge200is said:
Hi guys, is it possible to have bluetooth stereo on my wizard. Is there maybe a particular rom i must load.
Click to expand...
Click to collapse
BLuetooth stereo is built into the Wizard, with the standard ROM, at least on my T-Mobile (USA) MDA
You just need a BT stereo headset.
Thanks Myrddin Wyllt for the welcome.
Sorry about my impatience i would just like to say what a gr8 forum and you guys are doing amazing work. Been spending hours reading all the post and I hate reading so this is definitely good stuff.
Thanks
Auto redial through bluetooth headset is really a pain with new headsets with soft buttons.
When the earphone is in pocket many times the last call redial function is accidentally enabled.
Any chef any solution??
Thanks
I have no idea, but this isn't really a cooking question, as far as I can tell. It's probably better off in the Q&A forum, but I'll leave it here for now. Someone else may well have figured out how to do it (who doesn't cook roms).
EDIT: Wrong forum, ignore below unless you are on Android.
I too would like to disable last call redial on BT headsets. The best I have found is a program called "call confirm" which makes you confirm each time you want to make a phone call. Haven't tested it yet as it's actually for my father (I don't use a BT headset) but could be a good temporary fix. Otherwise I have not found any other solution.
http://www.appbrain.com/app/net.nanabit.callconfirm
Look at this: http://headsetbutton.com/
Maybe it could be an alternative while someone develops a free tool to manage that.
Trail is fully functioning for 21 days...but i think it's worth to pay 5.95 EUR for that.
Btw...thanks to funkwerk for the hint.
reallynotnick said:
I too would like to disable last call redial on BT headsets. The best I have found is a program called "call confirm" which makes you confirm each time you want to make a phone call. Haven't tested it yet as it's actually for my father (I don't use a BT headset) but could be a good temporary fix. Otherwise I have not found any other solution.
http://www.appbrain.com/app/net.nanabit.callconfirm
Click to expand...
Click to collapse
This application is for android only!
Thanks anyway
icke said:
Look at this: http://headsetbutton.com/
Maybe it could be an alternative while someone develops a free tool to manage that.
Trail is fully functioning for 21 days...but i think it's worth to pay 5.95 EUR for that.
Btw...thanks to funkwerk for the hint.
Click to expand...
Click to collapse
This is for wired headset.
Thanks anyway.
Farmer Ted said:
I have no idea, but this isn't really a cooking question, as far as I can tell. It's probably better off in the Q&A forum, but I'll leave it here for now. Someone else may well have figured out how to do it (who doesn't cook roms).
Click to expand...
Click to collapse
I agree with you.
There is a similar application editing the bluetooth drivers.
But this editing applies only for microsoft bluetooth not widcomm drivers that uses the htc.(i have the Leo)
Thanks for your message.
NIKOSXRI said:
This application is for android only!
Thanks anyway
Click to expand...
Click to collapse
Whoops, my apologies, I was just googling "android bluetooth last call redial" and didn't check which section I was in....
I can't believe neither platform has the ability to fix this. The only other option would be to find a different headset, like my father used to have a Motorola BT headset with a collapsable boom and when shut the buttons did not do anything though it would stay connected.
Well best of luck in your continued search.