I'm looking for a way to redirect my TomTom voice instructions from my MDA Vario through my Parrat CK3300 BT carkit sounding on my car-speakersystem by using the bluetooth stack. Now Parrot claims this isn't possible due to a phone limitation. I agree and think it's shortage of Microsoft WM5. Now I've looked up some info about Bluetooth Audio Distribution and found the following:
Advanced Audio Distribution Profile (A2DP)
AKU 2.0 for Windows Mobile 5.0 (for both, Smartphone and Pocket PC), which is expected to be released early next year (2006), will also includes support for the Bluetooth Advanced Audio Distribution Profile profile which is designed to transfer a stereo audio stream like music from the device to a headset or car radio.
A2DP is already implemented into the Samsung SGH-i300 Windows Mobile 2003 Second Edition Smartphone, however this isn't based on Microsoft's A2DP implementation but Samsung added it itself.
(Refer to http://www.theunwired.net/?itemid=2779 for more info concerning this subject.)
So if this article is based on true facts, it means that Microsoft will soon release a patch for all WM5 based devices, which enables them to receive all audio (e.g. TomTom voice instructions) through the bluetooth stack.
Somebody knows more about this subject and if it's true that after having AKU 2.0 installed, you can hear the navigation instructions through your carkit or headset?
Many thanks,
Youri Festen
there is a facility on this forum that will allow you to switch audio to and from the bluetooth, not high quality or stereo but standard quality.
There is ?
Been loking around in the threads for quite a while, but didn't find a replicatable solution...
Here you go
Tried all kind of files, but no go...
All i want is ALL audio over the Carkit (Supertooth2). That is TomTom + Phone.
I don't care if i have to trun of the carkit to return audio to the phone. But i don't want to have to reset or something.
I have a XDA (Himalaya) btw. Still with Rom 1.72 00WWE 15/03/2004 (Ext Rom 1.72.125)
Tried all these :
BA_OEM_AudioGW.CAB
BA_WM5_Voice_Dialer_2.cab
BCHS_FOR_POCKET_PC_OZONE[1].ARMV4.CAB
Broadcom Corporation BT-PPC AV.cab
Broadcom Stack + Switcher + Icon.zip
BroadcomCorp_BT1.0.0.3900.cab
BTAGExtModule-2.zip
btagextmodule.zip
btaudio.zip
MS-BT-107.ARMV4.CAB
SCO settings all BT.txt
voicedial2.rar
whoa it worked
i know im reaching here, but really wanted to try to stream to the new cingular 2125 (aka hct). downloaded and ran the app with my iphono steroe headphones (luv em), got intresting results.
it worked. ran the app, pushed the button on the headphones, got music. call came in, answered (with auto answer) talked, and on hangup it went back to music. however, if i ran another app on the phone such as voice tag in contacts to initiate a call, it brought in the call, but on hangup went back to the speaker. had to run the toggle on again to get headphones working, not elegant - always want more - but im a happy guy til a2dp comes out for mobile 5. thanks!
try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need
Scollinguk said:
try looking at this
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
might be what you need
Click to expand...
Click to collapse
Try reading and understanding what you read before posting. See the post of dalamario that is the BTAudio on/off tool !
Is this goingt to be anter shout and wild guesses about what file or tool should "really"work ?
I tried all so called "easy" fixes, hell, i've even got a whole dump of my registry, cut through all the BT + Audio and BT + Headset threads, here and on PDAPhonehome, Howardsforum, and the reduced-to-user-bla-bla on pocketPC-club.nl.
And still zilch.....
Ow, and don't think i'm someone who wants easy answers... Think again, i've been around quite a while on PPC forums and the lot....
What i do want/like is usefull answers ans clues on how this BT and Audio stuff works, beut even after reading some on MSDN i can't find a solution yet....
That's why i jumped in on this thread, i'm not going to reinvent the wheel if some allready has the solution: Tomtom and Phone audio over BT
So i'll stop writing now, and continiu searschin for a solution... There must be one...
Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.
The Wizard can do system Audio over bluetooth.
This has been proved with the easy hack that allows you to activiate voice dial using a BT headset.
http://forum.xda-developers.com/viewtopic.php?t=29837
MS Voice Command leaves the Audio Gateway open after initialising, whilst Voice Dialler closes it.
So maybe try installing Voice Command and doing the hack in the above referenced thread, and then see if you can launch Voice command from your car kit. This should leve the gateway open and allow all system sounds to stream to your BT kit until you hit the button again.
jpiek said:
Try reading and understanding what you read before posting.
Click to expand...
Click to collapse
Try keeping Himalaya talk in the Himalaya forum then. Posting questions about devices in the wrong forums just causes confusion.
Scollinguk said:
Sorry mr high horse, wont bother trying to help next time just in case i might not be right, but then if everyone did that no one would answer anything.
Click to expand...
Click to collapse
Not Mr High Horse, but didn't you look at what you where posting ? You should know it linked to the same file, right ? If not, you really would just be 'shouting' ...
It's just that i've been reading XXX threads, and just about everyone comes up with the same, useless, files... Like nowbody really knows how it works and waht should be done to make Audio over BT possible...
We here are all trying real hard for months now, you see....
Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
where is it? i want it! i need it!
ready to test.
Can't share it.
[CpD said:
bob]Can't share it.
Click to expand...
Click to collapse
spoil sport
i won't tell anyone,
got motorola ht850 headphones.
have one question whilst here,
when i am on the underground the headset give a beep to tell me i have no network signal? you may not know the answer but would this over ride the bluetooth stereo signal?
p.s. send me your bank details for the transfer :wink:
[CpD said:
bob]Just a little patience. Test version of Qtek 9100 ROM with A2DP already exists. It works with I-Phono bt-stereo, for example. So I think it will be released by March.
Click to expand...
Click to collapse
Do you think that when it works with I-Phono, it will also offer us the navigation voice instructions through BT-headsets or carkits? Hope so!
Can't test it with car navigator.
if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:
aliendad said:
if audio streaming is enabled, i would have thought you should be able to hear navigation commands.
i have used the bt audio switch that started this thread to hear tomtom commands through my headset, and it works fine.
saves me explaining to my 84 year old dad why yoda is giving me directions :lol:
Click to expand...
Click to collapse
It's nice.... I'd really like Tomtom over my carkit... Ohh, the XDA was so much easyer just soldered a Ground and Left/Right channnel into my TomTom/Leadtec connector, and plugged it in to my JVC Front-in line...
I bought the Qtec 2020 because BT seemd so much easyer
Related
i've been looking for the answer ( i think it should have been something that more people are suffering from but i was wrong )
i have a new headset. the sony hbh-ds970 nifty little thing. however when i'm receiving a call i only see the phone number on the screen. is there a way to display the name that the call is from when it is in my phonebook?
p.s. i'm using that upgrade to enable a2dp
Yes I know, it's really hard to find something here. Indeed there are more people than only you, who would like this feature to be supported! But bad news! Please read my little review of the headset in combination with the Magician in the A2DP thread: http://forum.xda-developers.com/viewtopic.php?p=337217#337217! So far only the point that MortPlayer does not support AVRCP is outdated.
The short conclusion, that matches also this thread is: "To sum up, the HBH-DS970 is a high quality product and the "Walkman" logo on it is justified. Only the Magician is not an equal counterpart to it."
well i'm willing to start on such an application. but i was looking yesterday, and since havn't found any sdk for the ppc2003se bluetooth stack. No api, actually finding info on a2dp or avrcd was pretty hard to come by.
Can anyone point me in the right direction (sdk for the ppc2003se bluetoothstack?)
i have some good ideas on how to implement the stuff.
That would be really nice! But I don't know if there is an SDK for the stack, maybe ask in a seperate thread!?
hmm why does the caller id sometimes work and sometimes not? i just got a call from a friend, and his name was in the screen, after the call i tried to phone and i got the right name in screen... pretty weird :S
Guys,
try this app (JETware Hands-free Extension for Windows Mobile phones) @ http://www.jetwaremobile.com/index.htm
It works!
The best option until M$ decides to implement it by their own in BT stack...
Conchas said:
Guys,
try this app (JETware Hands-free Extension for Windows Mobile phones) @ http://www.jetwaremobile.com/index.htm
It works!
The best option until M$ decides to implement it by their own in BT stack...
Click to expand...
Click to collapse
I mentioned this already and it does NOT work for me!
Unauthorized said:
I mentioned this already and it does NOT work for me!
Click to expand...
Click to collapse
Luckily, It work with my magician, Name of incoming call display correctly in Sony DS970 bluetooth
I just got the Microsoft Voice Command 1.6 (refer to as VC from here on) this morning and so far it has been quite disappointing.
I am using it on a Cingular 8525 with a Sony Ericsson HBH-GV435 headset (both are BT 2.0).
Right after the installation I noticed that the talk button on the headset did not trigger the VC so I did a power cycling.
After the power cycling the button will now trigger the VC as if I pushed the VC button on the phone but the problem is that it is not picking up my voice command via the headset but it is still listening from the phone's mic.
Any thoughts on this?
hjkl;' why no delete?
skygear said:
did you try to go under your d\settingd to chsnge the buttons? i think you have to reg edit the files for ear pice mic
Click to expand...
Click to collapse
I didn't know that.....I'm going to try and search for it. Can you maybe post a linky for the info on how to do that?
thx!
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
goestoeleven said:
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
Click to expand...
Click to collapse
I see. Thanks for the info. Hope the patch will be available soon!
What is the probelm with the ver 1.6 and the TyTn? Is it just the TyTN rom or does it not function with the JasJam or the 8525 either?
Dp you guys know this by experience or is it posted somewhere?
PocketPCThoughts list the 8525 as a "compatible device".
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
goestoeleven said:
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
Click to expand...
Click to collapse
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
mrderby said:
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
Click to expand...
Click to collapse
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
MickKnatterton said:
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
Click to expand...
Click to collapse
What do you mean it cant be installed. I have it installed on a TyTn and it works perfectly. I am not using a BT headset, so cant comment on that.
I've got v1.6 on an 8525 and it seems to working fine.
what exactly are the problems others are having with Hermes devices?
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
VC 1.6 works fine on my MDA with Motorola BT headset.
Mark (NL) said:
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
Click to expand...
Click to collapse
Seriously, why dind't any OEM use the Widcomm stack instead of the crappy MS one ?!
If only there was a way to hack the Widcomm stack and replace the MS one like they did with the Dell axims..
Adi
goestoeleven said:
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
Click to expand...
Click to collapse
Has anyone tried this... (look for the cab)
http://forum.xda-developers.com/showthread.php?t=283412&page=5
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
URPREY said:
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
Click to expand...
Click to collapse
Wow! Have you done any registry hacks? I'd love to see what your Voice Command keys look like....
TIA,
Richard
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
I know a patch is in the works to fix this issue, and when they do, 1.6 is superior to 1.5 for voice interpretation.
However, for now, I have 1.5 working perfectly fine. All features work, and all I had to do was enter/change 2 registry keys (only 1 was necessary)
xcsdm said:
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
Click to expand...
Click to collapse
So how loud do you have to shout for the mike on the 8525 to hear you if the phone is in the next room, or in your purse or you're driving? It might be the way MS intended it to work, but I doubt it.
[RANT]
I can't believe that MS wouldn't have caught this problem during beta testing. Speaks volumes (pun intended) for the current state of software development and testing at MS. Anyone know if MS Reader works with WM5 yet? How about full multi-user support for ActiveSync? Win XP has been around for years now with this funtionality. And while I am on my rant, how about SP3 for Win XP? Currently we would have to download and install over 70 (!) critical patches to SP2 just to get our computers to the dynamic state they are at today. Come on MS, enough is enough. Get your s#!* together!!
[/RANT]
John
I KNOW I KNOW, WIDCOMM stack...but what I want to know is basically can I route audio properly to my mono plantronics headset. I used to do this with my Wizard, and the headset routes audio fine during phone calls. Why can't a small program force this connection for streaming music. I don't care if it sounds like crap, i just want to be able to listen to it. ARGH this is driving me crazy. Any help would be nice.
If you are just going to say "try the widcomm stack" please don't. I read it doesn't play well with MS Voice Command and I use VC too much to not be able to have it function properly. Thanks in advance...
I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?
scharnet said:
I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?
Click to expand...
Click to collapse
yes, none of these programs seem to work with the 8525...but they did work with the 8125...
I know you don't want to hear it, but upgrade to WM6, and then apply Widcomm stack and MS vc 1.6. Works great. As a matter of fact, I installed it because Ms VC didn't seem to work right with ms bluetooth stack. Now, plantronics 640 works great, all audio is routed and MS Voice Command works flawlessly....
I have found all you need is the bbs_hermes_03.cab file (can't remember the exact name) from this post. the other files were not needed by me. Ran the cab file and everything worked
http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..
eagle 1 said:
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..
Click to expand...
Click to collapse
hrmmm, i'm running wm6. I'll give that a try later today. I didn't read anyone saying that in the thread. I'll give it a try.
I got a weird one. I connected my pda to my pc via High Quality Audio profile.
Now when I play a music file on my PDA, I get no sound from my speakers, but, upon going into Sounds Control Panel in Vista, I see the Bluetooth Microphone is receiving the data. When I stop the song, the data stops. When I play, it starts. How do I reverse this so that when I play a song, it shows up on my PC as output and not input, this is strange...
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
I installed this but it does not work AT ALL. I can't even use my bluetooth to talk on the phone.......wtf?
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Not sure if it's the same mortscript I'm using, but in the MS VC Bluetooth thread there is one posted as well.
Using the steps there, I'm quite easily able to switch from VC to mono audio routing.
Someone summed the steps up quite nicely, do a search for my name pkley towards the end of that thread...
BigBen said:
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben
Click to expand...
Click to collapse
Just install mortscript (find RC9) and then the mscr files will run as applications. You can put them in your applications folder and even run them using voice command if you have it.
If you want to write your own scripts, it comes with documentation, and you can find a few examples at gthing.net/scripts <----would really appreciate more scripts on that site if anyone has any they can upload.
gthing, thanks for the reply! I am going to look into this!
Ben
Ok, none of these things help...in fact the wicomm stack doesn't work with my bluetooth headset (plantronics 320) and I can't even un-install the damn thing. It just locks up my phone in the endless spinning rainbow wheel, or literally freezes. More-over none of these replies help as far as routing all sound from my phone to a MONO bluetooth headset...
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Thank you - works perfectly !
I am very sorry in advance if this issue has been raised elsewhere on the site, but after spending quite some time searching for an answer by both the forum search and google search, I am going round in circles and haven't found a solution.
I have a UK Tmobile Vario 2 (Hermes) running its original Rom (I have been too scared to flash it in case I break the phone as I don't really know what I am doing) and I have a Motorola S705 A2DP headset. I love the feature on VC 1.6 which reads out new text messages in full but can't find any way of routing the audio for this feature through my bt headset. The incoming call notification works through the headset but every time an SMS comes through it pauses A2DP, reads it via the phones loudspeaker, then diverts sound back to the headset again?!?
I went on the WIKI and found the Voice Command section. I tried installing the patch/program it suggests and did the tweaks it said to the registry , but it didn't make any difference on this problem.
I just wondered if this is an unfixable problem, or if there is anything I can do to get it working because this feature would be incredibly useful to me (I ride a motorbike and to get texts read through my headset when riding would be excellent).
Thanks in advance for any help guys. Sorry again if I am raising a known issue, if I am, if you could point me in the right direction it would be much appreciated.
have you tried this? i know this .cab file worked on my jawbone but i dont/have not used VC 1.6.
bapski said:
have you tried this? i know this .cab file worked on my jawbone but i dont/have not used VC 1.6.
Click to expand...
Click to collapse
Thanks Bapski, I have just installed it but unfortunately it hasn't helped thank you anyway though, it was definitely worth a try
Well, I have had a good read through the threads on Voice Command and all the fixes for the headset button but it seems nothing yet solves the problem of routing the SMS notification through the headset which is a shame, it would have been so useful.
Well, hopefully, when I get my nice new Kaiser upgrade (whenever that may be ) .. I will have more luck with the bluetooth audio
Don't buy a phone with a MS BT stack because they will never fix the problem..MS has known about this for so long its just sad..The next phone I get will have a widcomm bt stack.
Yeh, got to say that the bluetooth hasn't been particularly great ... especially when trying to get it working on A2DP.
If only I hadn't stumbled across VC 1.6 I would be none the wiser and wouldn't even know it is possible to have SMS messages read out oh well
it doesnt work dont even bother, I loved it on my wizard, but there is a hardware problem with the heremes or whatever the problem is the last revision of the BT stack doesnt fix it and its never worked. all the patches and fixes only work for awhile then just stop and rquire a cryptic series of hacks to make them half work again. your better off buying a thai slave to read your messages to you.
I used to use MSVC 1.6 on the Tytn2 on WM6.5 (see sig) and the confirmation notifications when you called someone always used the bluetooth headset. Since running it on the Leo MSVC seems to use the loudspeaker on the handset instead of the bluetooth headset even though every setting is marked as "Announce notifications using Bluetooth hands free only"
Anyone else having this issue as I did a search and couldn't find anyone.
Edit: Just had it working once but then the other end couldn't hear me when the call connected. Then I tried again and it had reverted back to not working.
I went to Bluetooth settings, Advanced, Audio and ticked the box then rebooted the phone...
I have this same problem! Its annoying... you want to make a call and the prompts/confirmation come from the phone... Please, can someone figure this out?
Bumping thread as it should be resolvable
Starfury said:
Bumping thread as it should be resolvable
Click to expand...
Click to collapse
IT isn't... I have done more research..
The Leo (and the TouchPro2) use a Widcomm BT stack as opposed to the usual MS stack. Sadly, this means the BT won't play nice with a lot of different apps/equipment. This isn't something that can be swapped out easily as NRG has pointed out. Touch Pro 2 users are still facing the same problems even though that phone was released much earlier. Some however have reported some success when using certain custom ROMS... how its working with some ROMS and not others is still a mystery it seems
I would watch the ROM Development thread carefully to see if a ROM what works with our MSVC shows up....
Hello,
Is there a workaround... ?
Thanks in advance for any info,
Jean-Jacques
I have the same problem. I'm using an old phone when I need to use hands-free. After spending a lot of money on my HD2, I'm not impressed.
I there a particular combination of headset and software that does work, especially for voice dialing?
have you tried this?
I would, but I don't know if I even have voice command on my phone.
http://forum.xda-developers.com/showthread.php?t=634494
DrATty said:
I there a particular combination of headset and software that does work, especially for voice dialing?
Click to expand...
Click to collapse
Does not work with my helmet bike with scala-rider Q2, but does with does with Philips SH9000 stereo headset...
Mono/Stereo seems to matter.
Any workaround would be veryyyy appreciated
Jean-Jacques
Workaround
Hi,
for this following workaround seems the only way to get it runnin:
My BT-Headset has the ability to be set as a Stereo-Device. When I establish a connection to this Stereo-Device, I can use it (my BT Headset) to give Commands and recieve "answers" from the VC. In case I want to start a phone-Call, my headset changes the connection automatically from "Stereo-Device" to "Handsfree-Device" and back, after finishing the Call.
This may be the Reason, why someone here already got it running with a BT-Stereo-Headset.?
Sorry for my bad english...