I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
Hi guys,
i just figured out, that my xda ii has very wide expansion world.
unfortunately i experiencing very bad problem. somehow during the process of ROM upgrading, suddenly the screen went blank. no responds even after reset (hard and soft reset), also no USB connection to PC, there is nothing.
the upgrade is from ROM 1.66 (original ROM) to ROM 1.72.
now i desperately asking for your advice or hints from your experiences how to revive my precious xda ii, i really love this gadget and i got it as my birthday present from my family.
i hope someone out there could help me to solve this problem.
many thanks,
many regards
never went back from post wm5 to older roms so i dont have any exp with it
but did you flash the extentedrom nbf file? if not you may have to reflash that using the flashtool same as if you were flashing rom or radio
and does it include the config.txt where all cabs to be run are listed
and the autorun.exe or what ever it's called?
thanks for your reply rudegar,
the problem is, i cant get into my xda at all, no bootloader screen appears. even though the usb cable plugged in, my PC wont recognize it. I can say it is in dead state.
do you have any clue, if its true dead, hoq to ressurect it?
I hope you or someone could come up with something
thanks before
Hi
I've got a HTC Hermes that won't boot up properly.
I've had a quick search and can't find to find the exact same proble but apologies if this has already been raised.
I previously flashed my T-mobile ROM with RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar.
The problem started when I downloaded a Registry Optimizer from Windows Update. When I started using this my phone was not in airplane mode, and just hangs on the logo screen (this is the gold Tai Edition)
I tried to do a hard reset (this goes to the screen with the four colour bands on it), and then when I reset it again it just switches to the logo screen and stays there. After a while, the screen goes white and stays there
I've got only a basic knowledge of flashing ROMs and when I first flashed my ROM i used Hard SPL and the basic AT&T Windows 6.1 ROM, before using TAI's custom one.
I presume I need to try and re-install the ROM (via the SD card, as Active Sync doesn't recognise the phone)
I was aware of risks whilst using the Registry Optimizer and realise that this is my fault, so I'm not expecting any quick fixes
Would be grateful though if anyone could point me in the right direction, if my phone is recoverable, and not bricked.
Cheers
You flashed a rom for the Kaiser.... You have a Hermes...
Looks like a brick to me....
If you use the sd card method you might be able to fix BUT make sure its a Hermes rom....
Thanks for pointing that out!
I found the thread on how to unbrick a hermes, so should be ok from here..
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
Hello,
first of all: sorry for my bad English, I will try to make you understand it.
I have a problem with my Herald. I hardspled it and put a rom on it. It worked really well, but I wanted it to be in my own language so i downloaded another ROM. During the installation of that ROM (I did it with ROMUpdateUtility), the phone fell off the PC and the cable pulled out. The phone was stuck in bootmenu and later went out.
Now I can't get it on anymore. I can't charge it (well, maybe it's charging, but there are no lights at all), I can't turn it on, I can't connect it to the PC ( the PC doesn't reccognize it) and I can't get into Bootmenu.
I tried a soft reset and a hard reset, but nothing happens. Is there a solution or do I have to buy a new phone?
Thank you!