Hi, I want to know if blackberry connect can be installed in shift and did it work ???
Because I just tried to install blackberry connect for touch pro in my shift and the installation was successfull, but the program couldn't generate PIN
why is that ???
are there any solution out there ??
bb connection
Blue_Lightning said:
Hi, I want to know if blackberry connect can be installed in shift and did it work ???
Because I just tried to install blackberry connect for touch pro in my shift and the installation was successfull, but the program couldn't generate PIN
why is that ???
are there any solution out there ??
Click to expand...
Click to collapse
good idea to use BB connection for shift.......which version for your test?
HTC Touch Pro Version
Hello,
I have working at 100% my bb with the shift, but only ussig the usb conector on the shift. Whith the original ethernet/usb-hub I can not conect... the bb is not detected correctly. Ussing another hub usb (with external supply), the bb conects perfectly.
Related
Hi,
I have recently obtained a T-Mobile MDA, I currently own a Diamond and I thought this would be a good introduction into WINMO for my younger brother. I initally wanted to flash the ROM with a Manilla 2d ROM however I can't even connect to my Device Center! (using the USB cord - which still charges the phone BTW)
I run Vista Ultimate 64 bit (which i thought could be the problem) but when I connect any other WM phone it works fine, it installs the software & shows the icon of the phone. With this "Nike" it does nothing, I can see MyMobile trying to connect over & over again but once again nothing! I've even done a Hard-Reset to try and rule out possibilities...
Does anyone have a solution/suggestion as to the cause of this problem? If I reconnect the Diamond straight afterwards it works perfectly!
hi
i got a touch dual right here. I got it for like 1,5 year now. But the last months the phone wont connect to a computer/laptop or anything!
i tried several computers, windows xp/vista/7 installing the mobile application of windows and activesync. Also i tried a softreset and couple of hardware resets.. it still doenst work. The phone has energy from the usb connection, but the computers dont do anything...
anybody can help? or is just my usb connection on my phone broken? only the charge option does work?
greets!
nobody?
It ever happened on my nike. Try to use another usb cable and connect your device to another PC with activesync installed
i got the same problem i was going to make a post but saw this one after installing niki wwe this started to happen i cant connect to active sync no more it does not even say if a usb is connected but charges while connected can some 1 help us please i want to install normal windows instead of cooked room but cant do it if its like this
well after half a year not being able too connect my phone connects again!
very weird, i didnt change anything, not even te cable and computer...
i installed wm 6.5 cleanblack now
*Sry for english*
It is possible to I use my HTC TyTN WiFI on PC ? To use HTC like my main WiFi on PC ? or Lap Top ? Some router or similar ?
Tnx for any advice.
hi gays
i can,t connect my device too active sync via bluetooth.my pc is addet to phone bluetooth devices,but 'com ports' page of bluetooth settings is empty and don,t have 'existing port' .so i cant add incoming and outgoing port for connect to pc sync.
i hawe install wm 6.1 ultimate (onyx 4.9) on my htc p3450.how can i solve that problem?it is possible change operation system made it?
What PC OS you using? My friend with Windows Vista having similar problem, but I don't have this problem with Windows 7.
I,m sorry for the subsequence too answer.that is xp sp2.
in my phone on the bluetooth settings/com ports , the "new outgoing port" icon is now showed (after i add other bluetooth mobile phones to my device),but my pc is not found in the devices list of outgoing port page.
Is your PC actually set to visible? Most arent as standard and has to be enabled via settings?
yes,my pc is added to phone devices list and i can send or recive file with bluetooth
Have your tried allowing activesync to connect via com ports? Check which com port your usb is using and select that. Could be worth a go.
(I use win 7 so have windows mobile device centre = easier. Activesync I forget the functions of)
yes friend,i already allowed that,but i have onli 'com1' in com ports in activesync.and when i click on 'connect',it will test that and sayd 'your device is not detected'
i only want too create outgoing port for my phone,and i think it can be worked only i can creat it for pc.
can you give the link of that software u.re used on your coumputer??it can be worked on win xp 32bit??
.
.
.
.
.
((((((down with ahmadinejad!)))))))
Hi friend,
I think I read somewhere in Onyx thread that activating "Beam" can solve some connectivity problems...
The software i used is win vista/win 7 version of activesync - works better from my experience and is more intuitive.
Also, in the usb to pc settings there is an option to enable faster connection or something like that. I do not have my elfs with me today to check the exact options - that may help though. I remember using it on my xp machines before when having issues. But again, I do not connect over bluetooth all to often.
finally,I get that the problem is from my bluetooth device
i used from a mini usb bluetooth device (that was plug and play).when i install the windows xp that i used on my pc on the laptab (with internal bluetooth) ,activesynk was working with no problem on that.
it resulted that te plug and play bluetoothes dosent good choices for general applications
thanx from all of friends
thanks for letting us know. I'm honestly not sure why I didn't question that as we get that issue all the time at work.... Its been a long time since I have been in support here though!
I have a problem synchronising my HTC Touch P3452 (also called T-Mobile XDA Touch / the model with 256 Rom / 128 Ram).
Simple: It doesn't work.
When I connect the USB cable the batterie starts being charged, but there is neither the typical Windows sound when an USB device is connected, nor does the "Windows Mobile Devices Centre" recognize the device.
When I try to start the active sync connection in the connection manager of the HTC touch it tells me to install the synchronising software first or to configure an exchange server.
Enabling or disabling the hook for "advanced network functions" in the "USB to PC" settings of the HTC touch connection options makes no difference.
Some infos:
ROM-version: 2.81.111.1 GER
Rom-date: 08/29/07
ExtROM-version: 2.81.111.103
I'm using Windows 7 Professional 64bit, DHCP-device-service is active, all updates are installed.
I'd try updating the firmware, but obviously it's not possible without a working active sync connection.
PS: My older HTC Touch P3450 (128/64) has no problem at all. I connect it, it starts synchronising. The HTC Touch 3452 is from a friend of mine and when I asked him he said he was able to synchronize, but under Windows Vista. I don't see why it shouldn't work in Windows 7.
Hi
Ì don't have Win 7 but I think I read somewhere you have to put it in compatibility mode with Win xp
Edit: a little search and I found this http://forum.xda-developers.com/showthread.php?t=519602
(you should try it too )
Put what in WinXP compatibility mode? The HTC? How. I never heard this was even an option.
Or do you mean the mobile device center? Why should I do that, it's a programm native to Win7 and it works with the older HTC, so normally it should with the never device, too.
And about your second link...well I already have Win7 (not the RC version) and the latest version of the windows mobile device center is already installed (came with the operating system). There is no windows update for that either, just checked.
I'll try to get my hands on a bluetooth-usb-stick, see if that connects properly. Unfortunately I don't own one...
I don't see any problem with my P3452 sync with Windows 7 Enterprise 64-bit Version. In fact it work instantly when I connect the USB cable to my laptop after I upgraded my laptop to Windows 7.
Did the cable connect properly? or the USB port on the phone itself?
How many pc the phone have sync to? I remember cannot be more than 2, but I might be wrong.
ahsiang888 said:
I don't see any problem with my P3452 sync with Windows 7 Enterprise 64-bit Version. In fact it work instantly when I connect the USB cable to my laptop after I upgraded my laptop to Windows 7.
Did the cable connect properly? or the USB port on the phone itself?
How many pc the phone have sync to? I remember cannot be more than 2, but I might be wrong.
Click to expand...
Click to collapse
It's only one PC and I think the cable connects properly, because the phone is getting charged when I attach the cable. On the other hand there is no Windows sound indicating a USB-device has been connected and the device doesn't show up in the workstation.
So it might be the USB connector which is broken (the cable worked without any problem on my older HTC so it should be okay). As the device is already a few years old I don't have any guarantee left.
On the weekend I will try to connect it via bluetoot with my brothers notebook (don't have bluetooth on my pc). If that works I will get me a cheap bluetooth usb dongle...
Also check pins aren't bent inside on the phone?
captainstu72 said:
Also check pins aren't bent inside on the phone?
Click to expand...
Click to collapse
They look okay to me. Nicely in a row, none is bent.
After some little trouble setting it up, synchronizing via bluetooth worked today.
Thanks for all the answers.